★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000237devices tracked

Home › Devices › Huami / Zepp › Amazfit wearables

[ device photo ]CUSTOM FW!

HUAMI / ZEPP · WATCH · 2018-

Amazfit wearables

Also called: Huami Amazfit · Zepp Amazfit · Amazfit Bip · Zepp OS watch

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 12 sources

Amazfit smartwatches from Huami / Zepp. Common software mods use Gadgetbridge instead of the vendor app, flash Bip firmware or unofficial Bip OS, and install watchfaces. Official Zepp OS apps and watchfaces use the maker's SDK. A hardware battery guide exists for the T-Rex Pro.[2][1][6][8][11]

5MODS
4WORK
1EXPERIMENTAL
12SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
A1608Amazfit Bip (1)2018Models A1608 and A1608B. Gadgetbridge treats it almost like a Mi Band 2 and documents firmware and Bip OS for this chassis.[12][5][2]
A1608BAmazfit Bip (1) variant—Listed with A1608 on the iFixit Bip device page.[12]
Zepp OS AmazfitZepp OS watches (GTR / GTS / T-Rex / Active and related)—Watches running Zepp OS. Gadgetbridge support varies by model; many need a vendor-app auth key first. Zepp docs name examples such as GTR 3 Pro, GTR 3, and T-Rex 2.[2][3][8]
Specs
Bip screen1.28-inch transflective color display; IP68[12]
Bip memory4 MB internal storage, 1 MB RAM[12]
Bip battery190 mAh lithium polymer; about 2.5 hours to charge[12]
Bip strap20 mm width[12]

Mods (5)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Gadgetbridge companion appWorks
SoftwareDifficulty: noneCase stays closedNo solderingReversible

Pair and manage Amazfit watches from an open-source Android app without relying on the vendor cloud. Newer Zepp OS models often need an auth key from a one-time vendor-app pairing; the Bip does not.[1][2][3][7]

Good to know

  • Gadgetbridge is free open-source software that pairs and manages watches and bands without the vendor app.[1]
  • The Amazfit Bip acts almost like a Mi Band 2 for Gadgetbridge features.[2]
  • Many Zepp OS models need pairing with the vendor app (Mi Fit, Zepp, or Zepp Life) first to obtain an authentication key.[2][7]
  • On Zepp OS, Gadgetbridge can install watchfaces, firmware upgrades, and apps (zip and zab), but supported features vary by device. Third-party realtime heart-rate access does not work.[3]

⚠ Watch out

  • Do not unpair the watch in the vendor app or the auth key becomes invalid. Remove or restrict the vendor app before connecting in Gadgetbridge so it does not conflict.[7]

Guides:Huami/Xiaomi server pairing - Gadgetbridge

Official Bip firmware via GadgetbridgeWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Flash Amazfit Bip (A1608) official firmware files through Gadgetbridge's installer. Gadgetbridge does not host the files.[5][4]

Good to know

  • The Gadgetbridge Bip page covers Amazfit Bip (1), model A1608. Recommended flash order is .fw, then .ft, then .res.[5]
  • Firmware 0.0.9.14 added English menus on the Bip.[5]
  • Bip / Bip Lite can hold one custom watchface through the FW/App installer.[4]

⚠ Watch out

  • Installing firmware or a watchface can brick the gadget. One brick was tied to faulty beta firmware 0.1.0.51.[5][4]

Guides:Amazfit Bip Firmware Update - GadgetbridgeInstall firmware & watchface - Gadgetbridge

Bip OS (patched firmware)Experimental
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Unofficial patched Bip firmware that lets custom apps live in resource files, with on-device alarm edits, calculator, calendar, flashlight, and an SDK.[6]

Good to know

  • Bip OS is a patched version of the original firmware allowing custom apps in custom res files.[6]
  • Flash order is firmware, then font, then resource file. A Windows tool packs apps; building on Linux is not supported.[6]

⚠ Watch out

  • Flash at your own risk.[6]

Guides:Amazfit Bip OS - Gadgetbridge

Official Zepp OS watchfaces and mini programsWorks
SoftwareDifficulty: noneCase stays closedNo solderingReversible

Build and install maker-supported watchfaces and mini programs with Watchface Maker or the Zeus CLI. Needs a Zepp account.[8][9]

Good to know

  • Zepp OS supports Mini Program and Watchface development through a lightweight framework.[8]
  • A Zepp account manages mini programs and watchfaces. Watchface Maker in the browser needs no programming; Zeus CLI builds can be tested in a simulator.[9]

Guides:Quick Start | Zepp OS Developers Documentation

T-Rex Pro battery replacementWorks
BatteryDifficulty: mediumOpens caseNo solderingReversible30 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Open the T-Rex Pro back cover (P5 pentalobe screws) and swap the lithium cell. Not verified for the Bip.[11][10]

Special tools: Pentalobe P5, plastic pry tools

Good to know

  • Remove four external back-cover screws with a Pentalobe P5 driver, then pry the snapped-on cover.[11]

⚠ Watch out

  • Use plastic tools and avoid excessive force so you do not pierce the lithium battery.[11]
  • Amazfit's India exchange policy voids the limited warranty for unauthorized repair, installation, or alterations (region-specific).[10]

Guides:Amazfit T-Rex Pro Battery Replacement - iFixit

Sources (12)

SOURCES.TXT