★ 77 device pages approved★ 764 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 77 device pages approved★ 764 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000080devices tracked

Home › Devices › Baofeng › Baofeng UV-5R

[ device photo ]NEW!

BAOFENG · RADIO · 2012

Baofeng UV-5R

Also called: UV-5R · BF-5R · BaoFeng UV-5R

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 7 sources · 1 item(s) unverified

Compact dual-band handheld (about 4 W). Common mods are CHIRP programming and software band unlocks, bigger Li-ion packs, a TRRS phone audio adapter, Bluetooth PTT, and advanced RX front-end filter work. There is no custom firmware for it like there is for the UV-K5.[2][3][4][1]

6MODS
4WORK
1EXPERIMENTAL
7SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
BF-5RUV-5R / BF-5R handheld2012Fujian Baofeng dual-band HT. FCC ID ZP5BF-5R (model BF-5R). Sold widely as BaoFeng / BTECH UV-5R.[1][2]
Specs
PowerAbout 4 W handheld transceiver[2]
Bands (stock)VHF 136–174 MHz and UHF about 400–480 MHz (520 MHz on later versions); the FCC grant for BF-5R covers 136–174 and 400–480 MHz[2][1]
BatteryBL-5 Li-ion, 7.4 V, about 1500–1800 mAh labeled[2]
AntennaSMA-Female jack[2]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

CHIRP programming and software band unlockWorks
SoftwareDifficulty: noneCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Program channels and, on some firmwares, widen the VHF/UHF limits with CHIRP or factory software. No case opening.[3][4][5]

Good to know

  • CHIRP is a free, open-source tool for programming the radio.[4]
  • The RDA1846S chip can cover roughly 65–520 MHz; factory firmware restricts the usable range.[3]
  • In CHIRP Settings, some firmwares let you edit frequency-range fields (e.g. VHF 65–174 MHz, UHF 400–520 MHz) and write them back.[3]
  • Factory software region codes and an older VIP keypad unlock can also widen limits; VIP is firmware-dependent and may fail on newer runs.[3]
  • uv5rtool can dump or upload the radio's memory image over a serial cable (CHIRP-compatible backup).[5]

⚠ Watch out

  • Software expansion only unlocks what the firmware allows. There is no UV-5R custom firmware like the UV-K5.[3]
  • Modifications may violate regulations in your jurisdiction. Only transmit where you are licensed and allowed.[3]

Guides:Baofeng Radio Modifications | HAM.WikiGitHub - bogde/uv5rtool

Extended battery packWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the stock BL-5 pack for a taller third-party Li-ion (about 2800–3800 mAh vs the stock 1500 mAh, labeled 1800).[3][2]

Parts

  • UV-5R extended Li-ion pack (≈2800–3800 mAh) Fits with conditions — Direct electrical replacement; added bulk may not fit every case or clip.[3]

Good to know

  • Extended packs are direct replacements — no board modification.[3]
  • Stock kit battery is a BL-5 Li-ion at 7.4 V (about 1500 mAh, often labeled 1800 mAh).[2]

⚠ Watch out

  • Cheap lithium cells can be a safety hazard. Buy from reputable vendors.[3]

Guides:Baofeng Radio Modifications | HAM.Wiki

TRRS phone audio adapterWorks
ConnectivityDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Tiny board that ties the UV-5R speaker, mic, and PTT lines to a smartphone 3.5 mm TRRS jack for packet/APRS apps.[6]

Parts

  • BaofengUV5R-TRRS adapter board Fits — Open-source PCB/schematic for the Kenwood-style accessory jack to TRRS.[6]

Good to know

  • Lets a smartphone or similar TRRS device connect to the UV-5R for audio and PTT.[6]

Guides:GitHub - johnboiles/BaofengUV5R-TRRS

Bluetooth PTT boardWorks
Buttons & inputDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Add a Bluetooth push-to-talk switch board aimed at Baofeng UV-5R-style transmitters.[7]

Parts

  • hamptt Bluetooth PTT board Fits with conditions — Designed for Baofeng UV-5R-class PTT control over Bluetooth.[7]

Good to know

  • hamptt is a Bluetooth PTT switch project for ham transmitters like the UV-5R.[7]

Guides:GitHub - mrkeuz/hamptt: Bluetooth PTT board for Baofeng UV-5R

RX front-end filter bypassExperimental
OtherDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Bypass or replace RF band-pass filters so the radio receives farther outside the stock bands. Advanced SMD work; RX-focused.[3]

Special tools: fine-tip soldering iron, solder wick, magnifier

Good to know

  • Stock band-pass filters attenuate signals outside the designed range; bypassing them can improve out-of-band RX.[3]
  • Trade-off is worse selectivity and more intermodulation. Needs surface-mount soldering; not for beginners.[3]

⚠ Watch out

  • Modifications void warranty and may violate regulations in your jurisdiction.[3]
  • PCB pads lift easily. The board is single-sided with thin traces.[3]

Guides:Baofeng Radio Modifications | HAM.Wiki

Custom firmwareNot possible
SoftwareDifficulty: noneCase stays closedNo solderingReversible

Not available. Unlike the UV-K5, the UV-5R has no community custom firmware.[3]

Good to know

  • Custom firmware does not exist for the UV-5R the way it does for the UV-K5; firmware is the hard limit on band unlocks.[3]

Sources (7)

SOURCES.TXT