★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › BlackBerry › BlackBerry Q10

[ device photo ]NEW!

BLACKBERRY · PHONE · 2013

BlackBerry Q10

Also called: SQN100-1 · SQN100-2 · RFL111LW · BB Q10

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources · 1 item(s) unverified

2013 BlackBerry 10 QWERTY phone with a 720×720 Super AMOLED, removable 2100 mAh battery and microSD. The Q10 itself is not on the LineageOS or TWRP device lists. The active community work reuses the Q10 keyboard on other phones (Fairberry).[11][12][1][15]

3MODS
2WORK
0EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
SQN100-1RFL111LW (US / Malaysia / Indonesia; includes AT&T)2013One of two BB10 phones unveiled 30 January 2013. Square screen above a physical QWERTY.[11]
SQN100-2RFM121LW (Verizon Wireless)2013Verizon North American variant.[11]
Specs
Screen720×720 Super AMOLED (1:1)[12]
Battery2100 mAh Li-Ion, removable (cover access)[12][11][13]
Storage16 GB internal + hot-swappable microSD (under battery cover)[11][13]
OSBlackBerry 10, upgradable to 10.3.1 or 10.3.3 (sources differ)[11][12]
PortsmicroUSB 2.0, 3.5 mm jack; Micro-SIM[12][11]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Q10 keyboard on a modern phone (Fairberry)Works
Shell reuseDifficulty: hardCase stays closedFine solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Can brick A mistake can leave the device unable to start.

Reuse a replacement Q10 keyboard on phones such as Fairphone 4 via a custom USB mainboard and a 3D-printed case. No separate keyboard battery or Bluetooth.[1][2][3][4][5][8][7][9][10]

Special tools: USBASP programmer, soldering iron

Parts

  • BlackBerry Q10 replacement keyboard (flex) Fits with conditions — Cheap AliExpress/eBay replacements; layouts include non-Latin sets. Flex film can tear when bent.[5][8][3]

Good to know

  • Fairberry's goal is to add a BlackBerry Q10 keyboard to non-BlackBerry phones, focused on Fairphone 4. It connects over USB with no separate battery or Bluetooth.[1]
  • Recommended path: custom mainboard. Download Gerber, BOM and CPL from releases; order PCBs (JLCPCB). The Hirose keyboard connector is often not stocked and may need JLCPCB's part-ordering programme.[2][1]
  • Flash with a USBASP on header pins. Do not plug the Fairberry USB into a PC while the USBASP is connected. Test by plugging into the phone's USB/Lightning port.[2]
  • OpenSCAD case generator has presets including Fairphone 4 and Samsung Galaxy A54. Bend the keyboard flex carefully — it can break.[2]
  • Newer board revisions use a Hirose connector that no longer needs hand-soldering. Board can target micro USB, USB-C or Lightning depending on the phone.[9][8][7]
  • On the phone, set the keyboard layout to international English. Backlight: Ctrl+Sym raises, Ctrl+Right Shift lowers.[4]
  • The Q10 keyboard has a 4-LED backlight and a built-in MEMS microphone; arturo182's BBQ10KBD repo documents the 28-pin pinout.[5]

⚠ Watch out

  • The older Arduino Pro Micro build is marked outdated. Messing up that path can damage the phone, PC or parts.[3]
  • Missing keys after assembly usually mean bad solder joints on the Hirose connector — check with the row/column matrix in the guide.[2]

Guides:Fairberry Hardware Fairberry Mainboard documentation

USB interface for Q10 keyboard (standalone)Works
Buttons & inputDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Microcontroller boards that present the Q10 keyboard (and optionally a trackball) as USB HID, with software backlight control. Useful without a Fairberry phone case.[6][5]

Good to know

  • ttyUSB.Q10 is a USB interface for the Q10 keyboard and BlackBerry trackball. Backlight brightness steps 0–100% in 20% increments via key combinations. Reference board: Adafruit Trinket M0.[6]
  • BBQ10KBD provides pinout and KiCad breakout files for the keyboard flex.[5]

Guides:No guide found yet.

Custom Android / alternate OS on the Q10Not possible
SoftwareDifficulty: noneCase stays closedNo solderingReversible

The Q10 is not on the LineageOS or TWRP device lists.[15][16][14]

Good to know

  • The Q10 is not on the LineageOS or TWRP device lists.[15][16]
  • One /e/OS forum user says BlackBerry 10 devices have a locked bootrom (hardware chain of trust), but also says they own Q10 units with unlocked bootroms. Forum opinion, not an official statement.[14] unverified

Buttons & modes

BUTTONS.TXT
WhatHow
Battery / microSD / SIM accessRemove the battery cover for the hot-swappable microSD slot. Take the battery out to reach the Micro-SIM. NFC sits inside the battery cover.[13]

Sources (16)

SOURCES.TXT