★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000237devices tracked

Home › Devices › Canon › Canon ELPH 160 (IXUS 160)

[ device photo ]CUSTOM FW!

CANON · CAMERA · 2015

Canon ELPH 160 (IXUS 160)

Also called: PowerShot ELPH 160 · IXUS 160 · Digital IXUS 160 · ELPH 160

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 14 sources · 1 item(s) unverified

Budget DIGIC 4+ compact sold as ELPH 160 (Americas) and IXUS 160 (elsewhere). The main mod is CHDK from an SD card for RAW and scripts.[1][3][2][10]

1MODS
1WORK
0EXPERIMENTAL
14SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
ELPH 160PowerShot ELPH 160 (Americas)2015Same camera as the IXUS 160. Plastic shell that scratches easily and feels slippery, Help / FUNC/SET / Display buttons, no PASM dial. Confirm firmware with ver.req / vers.req before loading CHDK.[1][3][4][8]
IXUS 160Digital IXUS 160 (outside Americas)2015Regional name for the ELPH 160. Same DIGIC 4+ body and CHDK port.[1][3]
Specs
SensorAbout 20 MP; DIGIC 4+; 8× zoom, 28–224 mm equivalent[3]
Screen2.7-inch LCD, about 230,000 dots[3][7]
BatteryNB-11LH / NB-11L Li-ion (Canon lists both; third-party guide: NB-11LH 800 mAh, NB-11L 680 mAh)[3][5][9]
StorageSD / SDHC / SDXC[3][6]
ConnectivityHi-Speed USB; AV OUT / DIGITAL; optional ACK-DC90 AC kit; no Wi-Fi[3][4][7]

Mods (1)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

CHDK custom firmware add-onWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible15-30 min
  • ⚠ Can brick A mistake can leave the device unable to start.

Loads into RAM from a prepared SD card. Adds RAW and scripts without replacing Canon's firmware. Remove or unlock the card to boot stock alone.[1][10][11][12][13][2][14]

Parts

  • SD card prepared with CHDK Fits with conditions — Build must match this camera and its firmware version. Autoboot uses the write-protect lock after the card is marked bootable.[11][1][13]

Good to know

  • CHDK is a firmware add-on that loads into the camera's memory at startup. It is not a permanent firmware upgrade.[10][12]
  • CHDK supports the ELPH 160 / IXUS 160; Autobuild support was added on 2016-04-16.[1]
  • Install: grab the Autobuild build and follow its instructions; no compiling required.[1][11]
  • Default CHDK menu key is Play; one owner recommends changing it to the Help key on this body.[1]
  • CHDK does not add a PASM dial or real aperture control on this camera; aperture commands only switch an ND filter.[1]
  • The master CHDK platform listing checked for this page has no ELPH 160 / IXUS 160 folder. The port may live only on Autobuild or another branch.[2][14] unverified

⚠ Watch out

  • Do not upgrade the camera's native Canon firmware from a card that also holds CHDK files. A firmware update file on the card can brick the camera.[1]
  • The build must match the exact model and firmware version. Confirm the version with ver.req or vers.req before loading.[11]

Guides:CHDK/doc/2_installation.txt

Sources (14)

SOURCES.TXT