★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000237devices tracked

Home › Devices › Canon › Canon HV20

[ device photo ]NEW!

CANON · CAMERA · 2007

Canon HV20

Also called: VIXIA HV20 · LEGRIA HV20 · iVIS HV20 · Canon Vixia HV20

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 12 sources · 1 item(s) unverified

2007 HDV miniDV camcorder with no LANC jack. Owners fit larger BP-2L / NB-2L packs and build wired or fiber IR remotes from the stock wireless controller. CHDK does not support this body.[1][9][2][7]

4MODS
3WORK
1EXPERIMENTAL
12SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
HV20VIXIA / LEGRIA / iVIS HV202007Marketed March 2007. Same camcorder sold as VIXIA HV20 (Americas), LEGRIA HV20 (Europe, Asia, Oceania), and iVIS HV20 (Japan). No LANC terminal on the official spec list.[1][2]
Specs
MediaHDV / miniDV tape; miniSD for stills only (forum)[1][11]
Screen2.7-inch widescreen LCD, about 211,000 pixels[1]
Battery (stock)BP-2L13 Li-ion, about 1200 mAh, 7.4 V; CA-570 power adapter[1][12][9]
Audio / video3.5 mm stereo mic jack; HDMI Type A (480i/480p/1080i); 10× optical zoom with lens-shift stabilizer[1]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Larger BP-2L / NB-2L batteryWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the stock BP-2L13 (~1200 mAh) for a Canon BP-2L14 (~1450 mAh) or a higher-capacity third-party NB-2L22-style pack. Plug-in only; no case work.[9][10][12][1]

Parts

  • Canon BP-2L14 Fits with conditions — Manual lists BP-2L13, BP-2L14, and NB-2LH. One owner found the 2L14 less snug; others say it fits as well as the 2L13.[9]
  • Third-party ~2200 mAh NB-2L22-style pack (e.g. Power2000) Fits with conditions — One 2007 test got about a third more runtime than stock. An engineer in the same thread warns that such packs may have leakage or heat issues and that the claimed capacity may be exaggerated.[10]

Good to know

  • Stock pack is the BP-2L13, about 1200 mAh lithium-ion at 7.4 V.[1][12][9]
  • Forum users treat the BP-2L14 as the larger Canon pack (about 1450 mAh) listed in the HV20 manual with BP-2L13 and NB-2LH.[9]
  • A Power2000-style 2200 mAh pack tested at about a third more runtime than stock (idle play about 4:05 vs 3:09; live recording about 2:21–2:36 vs 1:55).[10]

⚠ Watch out

  • Fit of the BP-2L14 is disputed: one owner said it was less snug; others said it fit as well as the stock pack.[9]
  • Third-party packs may have poor life, leakage, or heat issues. Prefer a known brand and watch the pack while charging.[10]

Guides:No guide found yet.

Wired IR remote from WL-D87Works
Buttons & inputDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Rewire a Canon WL-D87 wireless remote so an IR LED on a cable sits over the camcorder's IR sensor. No wiring into the camera electronics. Gives cable control of the remote's own buttons only.[2][3][1]

Parts

  • Canon WL-D87 wireless remote Fits — Opened and rewired; keep a second remote for practice. A mistake can destroy the remote.[2]

Good to know

  • The HV20 has no LANC control jack.[2][1]
  • The build rewires a standard WL-D87 remote for cable use. There are no electronic connections into the camera itself; the sender IR LED sits on the camera's IR sensor (e.g. with blu-tack).[2][3]
  • The cable only gives the functions the remote already has. A plain hard-wired remote stays stuck to the camera on its cable; a panel-mount socket on the remote switches its own LED off only while the cable is plugged in.[2]

⚠ Watch out

  • The builder warns that the Canon warranty is lost and that a wiring mistake can destroy the remote. Practice on a spare remote.[2]

Guides:How to make a "real" HV20 wired Lanc....How to make a "real" HV20 wired Lanc.... - Page 2

Optical (TOSLink) IR remote extensionWorks
Buttons & inputDifficulty: easyCase stays closedNo solderingReversible

Run the stock wireless remote's IR through a TOSLink or fiber cable to the camcorder's IR sensor. No soldering into the camera. Cheap tripod rigs and longer fiber builds (up to about 20 ft) are documented.[4][5][7][6]

Parts

  • TOSLink or fiber-optic cable with adapters Fits — Aim the remote LED into the cable end. One builder used fiber up to about 20 feet with TOSLink and right-angle connectors.[4][7][5]

Good to know

  • A TOSLink cable can carry the remote's IR to the camera sensor. Zoom and start/stop are the controls people care about most; the remote has no focus buttons.[4]
  • A short TOSLink cable taped on a tripod with the remote on the handle works; the LED must aim almost directly into the cable.[5]
  • A detailed HV20 fiber build uses fiber up to about 20 feet, TOSLink connectors, and adhesives; the author says the mods are reversible to stock.[7]
  • Forum replies treat the optical cable, rigged right, as the wired substitute when a boom shot cannot aim the remote.[6]

Guides:IR Remote ModHV20 - No LANC? No problem.Cheap solution to missing LANC...

LCD flip / mirror switchExperimental
ScreenDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Wire the internal LCD flip and mirror micro-switches to external switches for 35 mm depth-of-field adapters. Photos exist; the thread gives no step-by-step guide and says the camera is hard to take apart.[8]

Good to know

  • One builder added a manual switch for LCD image flip and mirror by wiring two internal LCD micro-switches to switches on the top of the camera. It is a physical change, not a firmware hack.[8]

⚠ Watch out

  • The thread shows photos only and says taking the HV20 apart is not easy. No install steps were published there.[8]

Guides:No guide found yet.

Sources (12)

SOURCES.TXT