★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000086devices tracked

Home › Devices › Casio › Casio VL-1 (VL-Tone)

[ device photo ]NEW!

CASIO · INSTRUMENT · 1981

Casio VL-1 (VL-Tone)

Also called: VL-1 · VL-Tone · Casio VL-Tone · Realistic Concertmate 200

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 10 sources · 1 item(s) unverified

1981 calculator + monophonic synth + sequencer. Popular for circuit bending, Highly Liquid MIDI retrofit kits, and ESP32 sample-player builds that keep the original keys and speaker.[1][9][2][8][7]

3MODS
2WORK
1EXPERIMENTAL
10SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
VL-1Casio VL-Tone1981First VL-Tone: calculator + mono synth + sequencer in one plastic body. RadioShack sold a rebranded Realistic Concertmate 200.[1][10]
Specs
Keys29 buttons; three-position octave switch[1][9]
VoicesFive presets plus one programmable ADSR voice; ten rhythm patterns; monophonic[1][9][6]
Display8-character LCD[1]
CPUNEC D1867G[10]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Circuit bendingWorks
AudioDifficulty: hardOpens caseBasic solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Add switches, pots, and extra wiring for feedback, pitch, and filter-style bends. Some builds add a line-out jack.[2][10][3][4][5]

Good to know

  • Almost all VL-Tone bends are amplifier feedback loops with no data glitches, so expect squealing distortion rather than random melodies.[2]
  • Unused CPU pins 20 and 21 put out plain square-wave versions of the melody that builders use to widen the sound palette.[10]
  • Examples have 10 to 12 bends on toggles and pots, one with external pitch pots and a 1/4" side jack for recording.[3][4]

⚠ Watch out

  • The LCD foil cable tears easily; secure it if you lift the digital board.[10][2]
  • Take the batteries out before long storage. Leaking cells may have faded one owner's LCD.[10]

Guides:No guide found yet.

MIDI retrofit kitWorks
ConnectivityDifficulty: mediumOpens caseBasic solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Install a Highly Liquid VL-1-MIDI board so an external MIDI keyboard or sequencer can drive the VL-1 keys.[8][9]

Parts

  • Highly Liquid VL-1-MIDI retrofit kit Fits — UMR-based board with VL-1 firmware; MIDI notes 55–83 trigger the keys like local presses.[8]

Good to know

  • The kit uses Highly Liquid's UMR with VL-1-specific firmware and a standard MIDI IN jack. MIDI notes 55–83 trigger the same as a key press.[8]

Guides:No guide found yet.

ESP32 brain replacementExperimental
OtherDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Replace most of the original sound hardware with an ESP32-C3 that plays samples from a microSD card, keeping the original keys and speaker.[7]

Good to know

  • An ESP32-C3 fitted into a VL-1 shell plays samples from microSD, with an OLED for choosing sounds and chord play modes.[7]

Guides:Cheap 80s Keyboard Gets Modern Brain Upgrade | Hackaday

Sources (10)

SOURCES.TXT