Home › Devices › Casio › Casio W-800H
CASIO · WATCH
Casio W-800H
Also called: W-800H-1AV · W-800H-1BV · W-800H-1BVES · Casio W800H
Affordable digital Casio with a factory-disabled countdown timer. Opening a solder jumper on the module unlocks that mode. Opening the case risks water resistance.[1][2][6]
Which one do I have?
| Model | Variant | Year | How to tell |
|---|---|---|---|
| W-800H-1AV | European / Casio catalogue listing | — | Casio lists the W-800H-1AV on its European site. Same W-800H family as the 1BV / 1BVES colour codes.[5] |
| W-800H-1BVES | Black / blacked-out display, European export | — | Module 3240. Suffix 1BVES: colour 1 (black), B (blacked-out display), VES (export / European).[6] |
| W-800H-1BV | Blackout dial (US listing) | — | Blackout-dial W800H-1BV sold in the US. One US shop lists countdown as a stock feature; other sources say it is off by default.[7] unverified |
Specs
Mods (1)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Unlock countdown timerWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Remove the factory solder bridge on jumper 0 (Timer Disable) so the hidden countdown mode appears. No new firmware is installed.[1][2][3][6][8]
Special tools: #00 Phillips screwdriver, fine tweezers or X-Acto, fine soldering iron, solder wick
Good to know
- Jumper 0 is labelled Timer Disable and is shorted at the factory; opening it (removing the solder) unlocks the countdown feature.[1][3][2]
- Open means solder removed; shorted or closed means a blob of solder joins the pads.[1]
- Steps: remove the battery, split the clamshell, set the jumpers, then reassemble. The original author did not clear memory and says the watch still worked.[1]
- The W-800H does not receive new firmware during this modification.[3]
- Other jumpers on the same board can change features: jumper 3 controls the 5× alarms (open by default), jumper 5 controls dual-time disable (open by default).[1]
- Shop listings note the countdown is not on by default and that board-mod instructions exist.[6]
⚠ Watch out
- Opening the case can damage the PCB, LCD connections, case seal or water resistance.[3][6]
- Casio recommends only authorized technicians work on its watches when re-sealing and re-pressurizing are needed.[8]
- Some jumpers may affect the piezo beeper; the original author noticed that only after writing up the mod.[1]
- Board or module revisions may differ; check the jumper layout on your watch before soldering.[3][1]
Guides:Casio W-800H ExtrasModding a Casio W-800H With a Countdown TimerModding A Casio W800-H With A Countdown Timer | Hackaday
Sources (8)
- blog Casio W-800H Extras · 2026-11-17
- news Modding A Casio W800-H With A Countdown Timer | Hackaday · 2026-11-17
- blog Modding a Casio W-800H With a Countdown Timer · 2026-11-17
- docs Casio 3239, 3240 Manual | ManualsLib · 2026-11-17
- official W-800H-1AV · 2026-11-17
- shop Casio W-800H-1BVES – Varusteleka · 2026-11-17
- shop Casio W800H-1BV Classic Digital Watch w/ Blackout Dial, Dual Time & 5 Alarms - CopsPlus · 2026-11-17
- official Watch Repair Service | CASIO · 2026-11-17