★ 200 device pages approved★ 2429 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 200 device pages approved★ 2429 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000206devices tracked

Home › Devices › Cisco / Pure Digital (Flip) › Flip UltraHD

[ device photo ]NEW!

CISCO / PURE DIGITAL (FLIP) · CAMERA · 2009-2011

Flip UltraHD

Also called: Flip Ultra HD · Cisco Flip UltraHD · Pure Digital Flip UltraHD · FVU2120B · U3120

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 10 sources · 3 item(s) unverified

Pocket HD camcorder with fixed internal flash, discontinued in 2011. Common fixes are the USB latch spring and battery door access; battery chemistry changed across years (NiMH AA pack, then Li-ion / AAA).[1][4][8][6]

4MODS
2WORK
2EXPERIMENTAL
10SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
UltraHD (2009 launch)AA NiMH pack2009Removable AA rechargeable NiMH pack (or regular AA). About 120 minutes at 720p/30 fps. Chrome-finished plastic sides on the launch body.[6][7]
UltraHD (2010 3rd gen)Li-ion / AAA, micro HDMI, 50 fps2010Twin AA slots replaced by three AAA slots plus a custom Li-ion pack. Adds 50 fps and image stabilisation; mini HDMI becomes micro HDMI.[9]
UltraHD (2011 8 GB)Li-ion / AAA, 60 fps2011Rechargeable Li-ion or three AAA, fixed 8 GB flash, 720p at 60 fps. Line discontinued by Cisco in 2011.[8][1]
FVU2120B / U3120Model numbers from battery listing—Sold as FVU2120B and U3120 by third-party battery sellers.[10] unverified
Specs
Video720p HD; about 120 minutes on 8 GB (2009 units often 30 fps; later units list 50 or 60 fps)[1][7][8][9]
StorageFixed internal flash (commonly 8 GB); not expandable[8][1]
LensFixed focus (about 1.5 m to infinity), f/2.4; 2× digital zoom[6]
Battery (2009)Removable AA NiMH rechargeable pack; regular AA cells also work[6][7]
Battery (later)Custom Li-ion pack, or three AAA cells[8][9][1]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

USB latch springWorks
RepairDifficulty: easyCase stays closedNo solderingReversible5-10 min

Replace the small spring under a sticker so the USB latch returns upright. Front battery panel slides off first.[4]

Special tools: needle-nose pliers

Good to know

  • When the USB latch stops returning upright, replace the spring under a sticker with needle-nose pliers.[4]
  • Slide the front panel down and up to remove it; pull the battery tab to take the pack out.[4]

Guides:Flip Ultra HD USB Latch Spring Replacement - iFixit

Replacement batteryWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible5 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the removable front pack. Early units take an AA NiMH pack; later units take a custom Li-ion (or AAA cells). Third-party ABT2W packs are sold for several UltraHD model numbers.[4][6][7][8][9][1][10]

Parts

  • ABT2W Li-ion replacement (shop listing) Fits with conditions — Rated 3.7 V / 1100 mAh and sold for FVU2120B and U3120. Match the pack shape to your generation.[10] Buy: batteryclerk.com

Good to know

  • 2009 UltraHD used a removable AA NiMH rechargeable pack; regular AA cells also work.[6][7]
  • Later UltraHD units use a custom Li-ion pack or three AAA cells.[8][9][1]
  • Front panel unlocks and slides off; pull the battery tab to remove the pack.[4][8]
  • USB charge of the NiMH pack took about 6 hours on a computer port (2009 reviews).[7]

⚠ Watch out

  • Battery chemistry and shape differ by year. Do not assume one pack fits every UltraHD.[6][8][9]

Guides:Flip Ultra HD USB Latch Spring Replacement - iFixit

USB connector replacementExperimental
RepairDifficulty: mediumOpens caseNo solderingPermanent15 min
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Replace a broken USB connector after opening the case. The iFixit guide is for the Flip Video Ultra, not named UltraHD; confirm your screw layout before following it.[3][2]

Special tools: Phillips #1 screwdriver, opening tool

Good to know

  • The guide covers removing and replacing the USB connector when the port is broken.[3]
  • UltraHD teardown uses a Phillips #0 and different shell steps than the Flip Video Ultra USB guide (#1 Phillips, 1 mm screws).[2][3]

⚠ Watch out

  • A teardown commenter reported damaging a unit while re-soldering a USB connector. Confirm the guide matches your shell before opening.[2]

Guides:Flip Video Ultra USB connector Replacement - iFixit

Glued wide-angle adapter ringExperimental
OpticsDifficulty: easyCase stays closedNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Superglue a step-down ring to the front so a screw-on wide-angle adapter can attach. Build report is for the Flip Ultra, not UltraHD.[5]

Good to know

  • Builder cited the Flip lens as about 38 mm by most reports, roughed a ring, and superglued it to the front so a wide-angle adapter could screw on.[5]
  • Leave the battery cover removable when gluing the ring.[5]

⚠ Watch out

  • The build was done on a Flip Ultra, not UltraHD. Glue is permanent; fit on UltraHD is unverified.[5]

Guides:KobreChannel: Want a Wide Angle Lens for Your Flip?

Sources (10)

SOURCES.TXT