★ 93 device pages approved★ 980 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 93 device pages approved★ 980 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000096devices tracked

Home › Devices › Holga › Holga 120

[ device photo ]NEW!

HOLGA · CAMERA · 1982

Holga 120

Also called: Holga 120N · Holga 120S · Holga 120SF · Holga 120CFN · Holga 120WPC · 144120 · 146120

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 20 sources · 5 item(s) unverified

Plastic 120 medium-format toy camera with a fixed plastic lens, zone focus, and a red window on the back. Common mods seal light leaks, fix or enlarge the aperture, convert to pinhole, add close-up filters, or transplant the lens onto a DSLR body cap.[6][9][18][4]

11MODS
10WORK
1EXPERIMENTAL
20SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
144120Holga 120N—Updated 120S-style body with plastic 60 mm lens, tripod mount, bulb mode, and hot shoe. iFixit gives model number 144120.[5][6][9]
Holga 120SOriginal 120S—Earlier plastic 120 body that the 120N largely copies.[9]
Holga 120SF120SF (flash)—Plastic-lens 120 body with no tripod mount and no bulb switch; used in Versluis aperture-mod build reports.[2][1]
146120Holga 120CFN color flash—Built-in flash with a red/yellow/blue/white color wheel. Freestyle item #146120. Flash needs 2× AA.[10]
Holga 120WPCWide pinhole (6×12 / 6×9)2006Factory wide pinhole camera with ~f/135 pinhole and 6×12 / 6×9 masks. SampleShots lists both 2006 and January 2008 as the release.[19] unverified
Holga 120GN / FN / GFN / GCFNGlass-lens and flash family variants—Guide to Film Photography lists glass-lens (G) and flash (F / CF) combinations in the 120 series.[9]
Specs
Film120 roll film; common masks 6×6 and 6×4.5[6][15]
Lens (stock)Plastic ~60 mm; nominal f/8 class; sunny/cloudy aperture switch often does nothing on early cameras[6][18]
Flash power (CFN)2× AA for the built-in color flash only[10][17]

Mods (11)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Seal light leaks and latchesWorks
CaseDifficulty: easyCase stays closedNo solderingReversible

Black tape on the back seams and sliding latches cuts stray light and keeps the back from popping open.[9][18][6]

Good to know

  • Black electrical tape along the back reduces light leaks.[9]
  • Tape over each sliding latch stops the back from sliding open mid-roll.[18]
  • The red window on the back can be covered when shooting panchromatic film.[6]

Guides:No guide found yet.

Close-up / macro filter on the lensWorks
OpticsDifficulty: easyCase stays closedNo solderingReversible

Clip-on Holga close-up sets or a generic macro filter on a 46–49 mm step-up ring let you focus nearer without opening the camera.[13][3]

Parts

  • Holga CLS-1 macro lens set (60 mm / 30 mm) Fits with conditions — Versluis used the CLS-1 on a Holga 120 and says it also fits 135 models (the 135 was not tested).[3]
  • 46–49 mm step-up ring + macro filter Fits — Generic macro filter needs the step-up ring to fit the Holga barrel.[13]

Good to know

  • Set Holga focus to infinity when using the CLS-1 add-on lenses; the subject must sit at the filter's focal distance.[3]
  • A generic macro filter needs a 46–49 mm step-up ring to fit.[13]
  • The Holga viewfinder is slightly inaccurate at close range.[13]

Guides:The Holga Darkroom: Holga Tips : Creating Close Up Photos with Your Holga 120

Twist-off lens for close-upsWorks
OpticsDifficulty: easyCase stays closedNo solderingReversible

The front lens twists off like a bottle cap (or after loosening the stop screw) so you can shoot closer or without the lens.[8][14]

Good to know

  • The lens twists on and off like a bottle cap for hand-held close-ups.[8]
  • Loosening the stop screw lets the lens unscrew freely from the front.[14]
  • Be careful not to detach the yellow hot-shoe sync wires when removing the lens assembly.[14]

Guides:Outside the Frame: The Holga Mod that begins all Holga Mods

Close-focus stop-screw modWorks
OpticsDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Remove the stock focus stop and set a new screw so the lens focuses as close as about 2 feet.[15]

Good to know

  • Taking out the lens stop and setting a screw through the front of the lens allows focus as close as about 2 feet.[15]

⚠ Watch out

  • The lens can fall out when the back ring is pried off.[15]

Guides:holgamod.html

Cut or remove the frame maskWorks
OpticsDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Cut the 6×4.5 mask to 6×6, sand or paint it, or slice it out to change vignette and frame size.[15][17][20]

Good to know

  • The 6×4.5 mask can be cut square to 6×6 with a rotary tool; clamp it while cutting.[15]
  • Removing the mask with a sharp razor or Exacto knife reduces the vignette effect.[17]
  • Sanding then spray-painting the mask (flat paint) is a common first flocking-style experiment.[20]

⚠ Watch out

  • Dull tools melt the plastic while cutting.[15]

Guides:holgamod.html

Working aperture switchWorks
OpticsDifficulty: mediumOpens caseNo solderingPermanent30 min
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Move or remake the aperture so the sunny/cloudy switch actually changes the hole — stock Holgas often have only one real aperture.[1][2][15][6][18]

Good to know

  • By default many Holgas have only one working aperture despite the sunny/cloudy switch.[2][6][18]
  • One common mod moves the metal aperture ring onto the swinging arm (with or without drilling plastic) for a larger second aperture.[1][2]
  • An archived guide epoxies the arm's large hole shut, then drills a new hole sized to the small ring.[15]
  • A larger aperture gains light but loses depth of field / focus.[1]

⚠ Watch out

  • Drilling the plastic body is a permanent change.[1][2]

Guides:I’ve modded my first ever Holga 120SF – JAY VERSLUISholgamod.html

Pinhole conversionWorks
OpticsDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Remove the lens and shutter (or tape a pinhole over the shutter on Bulb) and shoot through a homemade or commercial pinhole.[7][14][6]

Good to know

  • Cut a soda-can square, pierce a pinhole, remove the lens assembly (keep the flash sync wire), and tape the plate to the front.[7]
  • A simpler route: tape a pinhole over the shutter and set Bulb.[14]
  • Wikipedia notes the lens or whole shutter can be replaced with a pinhole ("Pinholga").[6]

⚠ Watch out

  • Do not break the yellow flash sync wire when removing the lens assembly.[7][14]

Guides:Flat Panel: Convert A Holga 120 Camera To A Pinhole CameraOutside the Frame: The Holga Mod that begins all Holga Mods

Flock / paint the interiorWorks
CaseDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Matte black paint or inside taping cuts internal reflections and light bounce.[6][18][20]

Good to know

  • The interior can be coated with matte black paint (flocking).[6]
  • Some shooters spray-paint the inside flat black; others tape seams instead.[18]
  • Inside taping can use the plastic cover to make the seal instead of relying only on tape sticky faces.[20]

Guides:No guide found yet.

Fix overextending shutterWorks
RepairDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Glue a cut spade terminal under the shutter as a stop when the shutter overextends and the camera will not fire.[5][18]

Special tools: Phillips or PZ1 screwdriver, hot glue, box cutter

Good to know

  • A spade terminal glued in place under the shutter acts as a block against overextension.[5]
  • A stuck shutter can sometimes be freed with a little sewing machine oil on the brass fittings.[18]

⚠ Watch out

  • Pull the shutter piece carefully to avoid snapping the shutter wire.[5]
  • A 2024 comment on the iFixit guide says the screws need a PZ1 bit, not the #00 Phillips listed.[5]

Guides:How to Fix an Overextending Holga 120N Camera Shutter - iFixit Repair Guide

Holga lens on a DSLR body capWorks
Shell reuseDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Pull the Holga lens element, drill a body cap, and glue the element on for toy-camera look on a DSLR. Uses up a donor Holga.[4][12][16][6]

Special tools: drill (5/16 inch), hot glue gun

Good to know

  • Disassemble the Holga, remove the lens (two screws, shutter off, twist the lens), pull the plastic element, drill the body-cap center, and glue the element to the cap.[4]
  • Leaving the element in the Holga lens body gives very short depth of field; pulling it closer to the sensor is the usual approach.[4]
  • Earlier DIY methods saw-cut the Holga lens and used a Dremel; later a cottage industry of body-cap Holga lenses appeared.[12]

⚠ Watch out

  • The build destroys a donor Holga to harvest the lens.[12][16]

Guides:How to Convert a Holga Lens for Your DSLR for Toy Camera Fun | PetaPixel

Raspberry Pi digital Holga shellExperimental
Shell reuseDifficulty: expertOpens caseBasic solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Cram a Raspberry Pi and Pi Camera into a Holga 120 case for a digital toy camera. Experimental maker build.[11]

Good to know

  • One Hackaday.io build puts a Raspberry Pi model A into a Holga 120n case with a filter ring for add-on lenses.[11]
  • That build uses the Pi camera's own lens, not the Holga lens.[11] unverified

Guides:No guide found yet.

Sources (20)

SOURCES.TXT