★ 77 device pages approved★ 764 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 77 device pages approved★ 764 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000080devices tracked

Home › Devices › Apple › iBook G3 (clamshell)

[ device photo ]NEW!

APPLE · LAPTOP · 1999-2001

iBook G3 (clamshell)

Also called: Clamshell iBook · iBook G3/300 · PowerBook2,1 · M2453

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 7 sources

The colorful clamshell iBook G3 (300, 366, and 466 MHz). The later white dual-USB G3 iBooks are a different case. The removable Li-ion pack unlocks with two coin screws. One SO-DIMM and the optional 802.11b AirPort card sit under the keyboard. Reaching the 2.5-inch IDE drive means a full teardown; one case mod cuts a window in the EMI shield so later swaps are easier.[6][4][3][2][1]

5MODS
4WORK
1EXPERIMENTAL
7SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
M2453300 MHz (original / Early 2000)1999Model identifier PowerBook2,1; EMC 1847. Order numbers include M7707LL/A (blueberry) and M7619LL/A (tangerine). Introduced July 21, 1999; from February 21, 2000 these shipped with 64 MB RAM and a 6.0 GB drive.[6]
iBook G3366 MHz SE / Paris—Clamshell SE and Paris speeds between the 300 MHz original and the 466 MHz. Early SE came in graphite; Paris colors include Key Lime and Graphite. Not the later white dual-USB iBook.[6][7]
iBook G3466 MHz (FireWire / SE / Paris)—Fastest clamshell. Paris models added FireWire and AV video-out; the 466 MHz SE could ship with a DVD-ROM. 500 MHz and later G3 iBooks are the dual-USB white redesign, not this case.[6][7]
Specs
Screen12.1-inch TFT, 800×600[6]
CPU (300 MHz original)PowerPC 750 (G3) at 300 MHz, soldered[6]
RAM144-pin PC66 SO-DIMM; one slot; 32 or 64 MB onboard on the 300 MHz models[6]
Storage2.5-inch Ultra ATA, up to 9.5 mm thick; original 300 MHz models 3.2 GB or 6.0 GB[6]
Battery45 Wh Li-ion[6]

Mods (5)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Rechargeable battery packWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible1 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the Li-ion pack under the battery cover. Two coin-turn locking screws hold the cover; lift the pack by its plastic tab.[4][6]

Special tools: coin

Parts

  • iBook Clamshell battery Fits — Drops into the underside bay after the cover is off.[4]

Good to know

  • Turn both battery locking screws 90 degrees left with a coin, remove the cover, and pull the pack up by the plastic tab.[4]
  • The stock pack is a 45 Wh Li-ion cell.[6]

Guides:iBook G3 Clamshell Battery Replacement

SO-DIMM RAMWorks
OtherDifficulty: easyOpens caseNo solderingReversible5-25 min

One memory slot sits under the keyboard. Flip the keyboard on its spring tabs, remove the RAM shield, and seat a 144-pin SO-DIMM.[3][6]

Parts

  • 144-pin SDRAM SO-DIMM Fits with conditions — Spec sheets list PC66 modules; the slot also takes PC100 or PC133 chips up to 512 MB.[6][3]

Good to know

  • Pull the keyboard release tabs, lift the keyboard (ribbon still attached), remove two Phillips screws and the wire-bracket RAM shield, then release the side tabs to pull the module.[3]
  • There is one SO-DIMM slot. The spec is 144-pin PC66 modules; PC100 or PC133 up to 512 MB also works.[6][3]

Guides:iBook G3 Clamshell RAM Replacement

Original AirPort cardWorks
ConnectivityDifficulty: easyOpens caseNo solderingReversible5-15 min

Install the optional 802.11b AirPort card under the keyboard. The bay has a dedicated antenna connector in the case.[5][6]

Parts

  • Original 802.11b AirPort card Fits — Internal slot with antenna in the case.[5][6]

Good to know

  • After the battery and keyboard are flipped back, grasp the clear plastic tab on the card and pull up toward the display, then unplug the antenna cable.[5]
  • AirPort (802.11b) was optional on the original clamshell; the machine has an internal slot and antenna.[6]

Guides:iBook G3 Clamshell Airport Card Replacement

2.5-inch IDE drive or CF/SD adapterWorks
StorageDifficulty: hardOpens caseNo solderingReversible2 hours
  • ⚠ Data loss Can erase what is on the device. Back up first.

Replace the internal drive with a 2.5-inch IDE disk up to 9 mm thick, or a CompactFlash or SD card on a 44-pin IDE adapter. Reaching it means taking the machine down to the EMI shield.[2][1][6]

Special tools: TR8 Torx screwdriver, Phillips screwdriver, 5 mm nut driver

Parts

  • 2.5-inch IDE / PATA drive (≤9 mm) Fits — Ultra ATA bay; iFixit allows drives up to 9 mm thick.[2][6]
  • IDE-to-CompactFlash or IDE-to-SD adapter Fits with conditions — Low End Mac fitted a CF card on an IDE-to-CF adapter after the shield window. iFixit guide comments also report CF and SD adapters.[1][2]

Good to know

  • A stock drive swap means stripping the machine: keyboard, colored shell, display, modem path, and metal EMI shield. The drive cable uses a plastic pull loop; bending the pins is easy.[2][1]
  • The bay takes a single internal Ultra ATA 2.5-inch drive up to 9.5 mm thick (iFixit guide: up to 9 mm).[6][2]
  • A CompactFlash card on an IDE-to-CF adapter has been fitted in a clamshell after the EMI-shield window mod. Guide comments also report SD-card adapters.[1][2]

⚠ Watch out

  • Disconnect the hard drive cable with even pressure on both sides. Bent pins are hard to straighten.[2]

Guides:iBook G3 Clamshell Hard Drive Replacement

EMI-shield window for the driveExperimental
CaseDifficulty: hardOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

After the machine is apart, cut a rectangle in the thin aluminum EMI (EFI) shield and bend the drive-carrier tabs back. Later drive swaps can then slide in from above without another full teardown.[1]

Good to know

  • With the shield out, cut a rectangular opening the size of the hard drive. The thin metal cuts with sharp scissors.[1]
  • Bend the hard-drive bracket tabs back so a drive or adapter can slip in and out. The bracket is fragile; the tabs are tough.[1]

⚠ Watch out

  • The cut in the shield is permanent. Some people say removing EMI shield material can raise heat; the author thinks that only matters if the whole shield is removed.[1]

Guides:Clamshell iBook Mod Lets You Easily Change the Hard Drive

Sources (7)

SOURCES.TXT