★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000086devices tracked

Home › Devices › Apple › iPod nano (2nd generation)

[ device photo ]NEW!

APPLE · MUSIC PLAYER · 2006

iPod nano (2nd generation)

Also called: nano 2G · iPod nano 2nd gen · A1199

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 17 sources

2006 anodized nano (2/4/8 GB) with soldered flash — no drive upgrade. Practical mods are soldered battery swap, display/case repair, and Rockbox via the iLoader bootloader.[1][2][5][11]

4MODS
4WORK
0EXPERIMENTAL
17SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
A11992nd generation nano2006EMC 2115. Rounded colorful anodized shell (tiny mini look). Silver 2 GB; silver/pink/green/blue 4 GB; black 8 GB. Sept 2006–Sept 2007.[2][4][1]
Specs
Capacities2 GB, 4 GB, 8 GB (soldered flash; not upgradable)[1][3]
PortsDock connector (USB); stereo minijack[1]
Battery life (rated)Up to 24 hours music[1][2]
Size3.5 × 1.6 × 0.26 in[1]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Rockbox via iLoaderWorks
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Install the iLoader bootloader for the 2nd gen nano, then boot Rockbox (or stock) from it.[11][12][13][14][15][16]

Good to know

  • iLoader is a customizable bootloader for the second-generation nano; it can reach the Rockbox menu in about two seconds.[11]
  • The official installer page lists an Installer for iPod Nano 2G. Do not leave an existing "iLoader" folder on the device. Author warns you can trash data or brick the iPod.[12]
  • A 2009 Habr write-up walks through iLoader + Rockbox on a 2G. Daniel Stenberg later noted Rockbox boots and runs on the 2G since autumn 2009. Official Rockbox source has an ipodnano2g config (S5L8701).[13][14][15]
  • iPodLoader 2 also lists nano 2nd generation among supported models and can boot Rockbox, iPod Linux, or stock OS.[16]

⚠ Watch out

  • Brick and data-loss risk are explicit on the iLoader installer page.[12]

Guides:iLoader installationIpod Nano 2 gen with RockBox via iLoader - HabriLoader - Free your Nano!

Battery replacement (soldering)Works
BatteryDifficulty: hardOpens caseFine solderingReversible45 min–2 h
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Open the nano and solder a new cell to the logic board. iFixit rates it very difficult; EveryMac recommends a pro.[5][6][10][7]

Special tools: soldering iron, desoldering braid

Parts

  • iPod nano (2nd Gen) battery Fits — Listed for A1199 2/4/8 GB (e.g. 3.7 V 350 mAh class parts).[6] Buy: ifixit.com

Good to know

  • iFixit: battery swap requires soldering. Lock Hold first. Do not scrape the metal rings around the board connectors — without them the new pack cannot reconnect.[5][10]
  • EveryMac: nano battery replacement is difficult, needs soldering, and professional install is recommended for all nano generations including 2G.[7]

Guides:iPod Nano 2nd Generation Battery Replacement - iFixit

Display replacementWorks
ScreenDifficulty: hardOpens caseNo solderingReversible45 min–2 h
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Replace a cracked or dead screen. Lock Hold; mind the plastic around the dock connector when removing the bottom bezel.[8]

Good to know

  • iFixit display guide: replace a cracked or faulty display. Do not bend the plastic surrounding the dock connector when removing the bottom bezel.[8]

Guides:iPod Nano 2nd Generation Display Replacement - iFixit

Case / shell assemblyWorks
CaseDifficulty: hardOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Replace the colored metal casing. Headphone jack and click wheel share a fragile ribbon.[9][17]

Good to know

  • iFixit case assembly guide covers the colored metal casing. The headphone jack connects to the click wheel with a fragile ribbon.[9]
  • A 2007 iLounge review covered a third-party aluminum shell for the 2G, made of two pieces of hard aluminum that slide together.[17]

Guides:iPod Nano 2nd Generation Case Assembly Replacement - iFixit

Sources (17)

SOURCES.TXT