★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000086devices tracked

Home › Devices › Apple › iPod shuffle (2nd generation)

[ device photo ]NEW!

APPLE · MUSIC PLAYER · 2006

iPod shuffle (2nd generation)

Also called: shuffle 2G · iPod shuffle 2nd gen · A1204

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources

Clip-on screenless shuffle (1–2 GB) with soldered flash and a dock for USB charge/sync. No Rockbox or storage upgrade. The real work is a fine-soldering battery swap and stock restore tools.[6][1][16][10]

4MODS
3WORK
0EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
A12042nd generation shuffle2006Smaller than the original USB-stick shuffle; no USB connector on the body; clip form. Back label A1204 / EMC 2125. Easy to confuse with 4th gen; 3rd gen uses a three-button controller. Serial suffixes often 1ZH/1ZK/1ZM/1ZP/1ZR.[6][7][3][8]
Specs
Capacities1 GB (2006); 2 GB added 2008 — soldered flash, no easy upgrade[9][10]
BatteryBuilt-in rechargeable lithium polymer; up to ~12 hours music; ~4 h charge (2 h to 80%)[5]
CPU / OSSigmaTel STMP3550; final shuffle OS 1.0.4[11]
Charge / syncVia included USB dock (no USB plug on the player)[5][6]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Battery replacement (SMD soldering)Works
BatteryDifficulty: expertOpens caseFine solderingReversible1-2 h
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Slide the board out of the clip shell and desolder the Li-Po cell. Fine-tip iron and surface-mount skill required.[1][3][2][4][14][10]

Special tools: fine-tipped soldering iron, pry tool, small Phillips

Parts

  • iPod Shuffle 2nd Generation battery Fits with conditions — Aftermarket listings cite 616-0274 / 616-0278; capacity figures conflict (100 mAh shop vs 450 mAh wiki) — match the physical cell.[14][10] Buy: subtel.de

Good to know

  • Replacing the battery needs a fine-tipped iron and surface-mount knowledge (rated very difficult, 1–2 hours). Peel adhesive before desoldering; do not short the + and − leads.[1]
  • The Li-ion polymer battery is soldered onto the logic board. Board and battery slide out of the case as one unit; desolder to separate them.[3][4]
  • If the pack will no longer charge, soldering replacement is the path. Control buttons are not separately replaceable — that needs a logic board.[2]

⚠ Watch out

  • Thin plastic bezels: do not pry the metal plate beneath them.[4]

Guides:iPod Shuffle 2nd Generation Battery Replacement - iFixitiPod Shuffle 2nd Generation Take Apart Repair Guide

iTunes restore / Reset UtilityWorks
SoftwareDifficulty: easyCase stays closedNo solderingPermanent
  • ⚠ Data loss Can erase what is on the device. Back up first.

Restore stock firmware with iTunes or Apple's iPod Reset Utility. Erases the player — back up first.[12][2]

Good to know

  • Apple lists iPod Reset Utility 1.0.4 (Windows) and 1.0.3 (Mac) for the 2nd gen shuffle.[12]
  • Restoring with iTunes erases everything; store a copy elsewhere first. Check the Hold switch before opening the hardware.[2]

Guides:iPod shuffle (2nd generation) Manuals and Downloads

Custom firmware (Rockbox / iPodLinux)Not possible
SoftwareDifficulty: noneCase stays closedNo solderingReversible

No supported open firmware port. Rockbox marks this model unsupported; iPodLinux excluded the shuffle (no compiler for its DSP core, no screen).[16][13]

Good to know

  • Rockbox TargetStatus lists iPod shuffle 2nd gen as not supported.[16]
  • iPodLinux excluded the shuffle: no GCC for its DSP57000 core, and the player has no screen.[13]
DIY travel case from Apple earbuds caseWorks
CaseDifficulty: easyCase stays closedNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Reuse the Apple in-ear headphones case as a shuffle travel pouch by cutting out two internal pins.[15]

Special tools: rotary tool

Good to know

  • Uses the case that ships with Apple in-ear headphones; cut out the two useless internal pins with a rotary tool.[15]

Guides:HOW TO – Make an iPod Shuffle Gen 2 travel case - Make:

Sources (16)

SOURCES.TXT