★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000086devices tracked

Home › Devices › Amazon › Kindle Oasis

[ device photo ]NEW!

AMAZON · E READER · 2016-2019

Kindle Oasis

Also called: Oasis 1 · Oasis 2 · Oasis 3 · KOA · KOA2 · KOA3 · 8th generation Oasis · 9th generation Oasis · 10th generation Oasis

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources

Amazon’s Kindle Oasis line (2016, 2017, and 2019). Documented changes are firmware-specific jailbreaks (WatchThis and KindleBreak), KUAL/MRPI and KOReader after jailbreak, plus iFixit battery and charging-port repairs for the 8th-generation unit.[1][4][6][8][14][9][10]

6MODS
6WORK
0EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
B00K8SXY4QOasis 1 (2016) / KOA / 8th generation2016Original Oasis. Nickname KOA. Serial prefixes include G0B0GC, G0B0GD, G0B0GR, G0B0GU, G0B0GT. Amazon marketing calls this the 8th generation.[2][1][3][5]
B076H9KGJNOasis 2 (2017) / KOA2 / 9th generation2017Second Oasis. Nickname KOA2. Serial prefixes include G000P8, G000S1, G000SA, G000S2, G000P1. Amazon does not call it Oasis 2; enthusiasts do. Marketing generation is 9th.[2][1][3][5]
B07KJW2T6GOasis 3 (2019) / KOA3 / 10th generation2019Third Oasis. Nickname KOA3. Serial prefixes include G0011L, G000WL, G000WM, G000WN, G000WQ, G000WP. Marketing generation is 10th.[2][1][5]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

WatchThis jailbreakWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Firmware-specific jailbreak for KOA1, KOA2, and KOA3 on 5.13.4 through 5.14.2. Needs a factory reset and the payload that matches your device and firmware.[4][5][12]

Good to know

  • Compatible with KOA1, KOA2, and KOA3 on firmware 5.13.4 through 5.14.2. WatchThis works up to 5.14.2.[4][5]
  • Requires a factory reset first. Back up your data before proceeding.[4]
  • You must use the exploit payload that matches your device and firmware combination exactly.[4]
  • Install runs through demo mode: enter the demo command in search, skip Wi-Fi, enter dummy registration values, then sideload a folder.[4]
  • Firmware 5.14.3.0.1 patches the WatchThis vulnerability.[5]

⚠ Watch out

  • Factory reset wipes the device. Back up first.[4]

Guides:WatchThis (5.12.2.2/5.13.4-5.14.2)

KindleBreak jailbreakWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Browser jailbreak for almost any Kindle on firmware 5.10.3 through 5.13.3, including all three Oasis versions. Newer firmware cannot use it, and 5.13.4 or 5.13.5 cannot be downgraded.[6][7][12]

Good to know

  • Works with all three Oasis versions (KOA, KOA2, KOA3) on firmware 5.10.3 through 5.13.3. Anything above 5.13.3 does not work.[6][7]
  • Kindles on 5.13.4 or 5.13.5 are not supported and cannot be downgraded.[7]
  • Install by downloading the zip, then opening the Experimental Browser to the KindleBreak page on the device.[6]
  • Without an OTA blocker, keep airplane mode on so an update does not remove the jailbreak. On 5.12.x and later there is no sure way to block automatic updates.[6]

⚠ Watch out

  • Keep airplane mode on until you have OTA protection, or an update can remove the jailbreak.[6]

Guides:Tutorial KindleBreak - Software Jailbreak for (almost) any Kindle <= 5.13.3

KUAL and MRPI launcherWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

After a jailbreak, install KUAL (launcher) and MRPI (package installer) together so you can run homebrew packages.[8][12][13]

Good to know

  • Copy the files to the device, eject, then enter ;log mrpi in the search bar to start MRPI.[8]
  • For firmware 5.9 and newer, use the KUAL Booklet (coplate) variant.[8]
  • KUAL Booklet and MRPI depend on each other, so install both at the same time.[8]
  • Jailbreaking is what lets you run external code; KUAL/MRPI are the usual next step for homebrew packages.[12][13]

⚠ Watch out

  • Installing tweaks or apps from unknown sources can brick the device or install malware.[13]

Guides:Installing KUAL/MRPI

KOReaderWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Open-source document viewer for jailbroken Kindles. Needs a jailbreak and OTA blocking first. Amazon KFX is not supported.[14][15][16]

Good to know

  • KOReader can be installed on all jailbroken Kindle devices. You need a jailbreak and active OTA update blocking before copying files.[14]
  • Install via Kindle Package Manager (KPM) or launcher extensions via KUAL.[14]
  • Proprietary Amazon KFX format is unsupported.[14]
  • KOReader is a document viewer for E Ink devices supporting formats such as EPUB, PDF, DjVu, XPS, CBZ, and MOBI.[15]

Guides:Installation on Kindle devices · koreader Wiki

Replace the batteryWorks
BatteryDifficulty: easyOpens caseNo solderingReversible5-10 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

iFixit Easy battery swap for the 8th-generation Oasis (about 5–10 minutes). The linked battery part is sold for 2016, 2017, and 2019 Oasis units.[9][11]

Special tools: opening tool, spudger, tweezers

Parts

  • Kindle Oasis (2016) Battery (Model #223337, Part #58-000117) Fits with conditions — iFixit lists 245 mAh for the 2016 Oasis. A reader comment on the guide says 890 mAh Li-polymer 3.7 V; capacity not settled. Guide’s part link names 2016, 2017, and 2019.[11][9] Buy: ifixit.com

Good to know

  • iFixit rates the 8th-generation Oasis battery guide Easy, about 5 to 10 minutes.[9]
  • Disconnect by lifting the orange bridge connector with tweezers.[9]
  • The guide’s battery part is named for Kindle Oasis 2016, 2017, and 2019.[9]
  • iFixit’s parts page lists a 245 mAh battery for the 2016 Oasis (Model #223337, Part #58-000117).[11]

⚠ Watch out

  • Do not use a metal spudger near the battery; you could puncture it.[9]
  • Do not rip the thin foil on the back of the battery.[9]
  • A new battery might not be charged and may not power on immediately.[9]

Guides:Amazon Kindle Oasis 8th Gen Battery Replacement - iFixit

Replace the charging portWorks
ChargingDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

iFixit Moderate repair for the 8th-generation Oasis charging port. Port and power button share one connector. Use ESD-safe tools.[10]

Special tools: ESD-safe spudger, opening tool

Good to know

  • With a defective charging port, the Kindle is hard to connect to a charger or computer.[10]
  • The charging port and power button are attached to one connector.[10]

⚠ Watch out

  • Only use ESD-safe tools on internal components.[10]
  • Do not use a metal spudger near the battery; you could puncture it.[10]

Guides:Amazon Kindle Oasis 8th Gen Charging Port Replacement - iFixit

Sources (16)

SOURCES.TXT