★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › Kobo › Kobo Aura HD

[ device photo ]NEW!

KOBO · E READER · 2013

Kobo Aura HD

Also called: Aura HD · N204B · Kobo AuraHD

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 15 sources · 2 item(s) unverified

Rakuten Kobo’s 6.8-inch E Ink Pearl reader with ComfortLight (model N204B). NickelMenu or KFMon plus KOReader install from USB. Hardware work covers screen replacement, a glued battery swap, and an older internal microSD expansion method.[2][1][3][15][9][5][14]

6MODS
4WORK
2EXPERIMENTAL
15SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
N204BAura HD2013Creased back with a dip in the centre. Model number N204B. Not the plain Kobo Aura (N514), which has a flat back with creased edges. Officially discontinued March 6, 2015.[1][2][4]
Specs
Screen6.8-inch WXGA+ E Ink Pearl, 1440×1080, with ComfortLight front light[3]
Storage4 GB internal; microSD expansion up to 32 GB[3][4]
Battery3.7 V 1500 mAh Li-Polymer; Kobo rates up to about two months[4][3]
ConnectivityWi-Fi 802.11 b/g/n; Micro USB (wired charging only)[3][4]
ButtonsPower and light[3][4]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

NickelMenu launcherWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Adds a custom menu to stock Kobo Nickel. Install by copying KoboRoot.tgz into the .kobo folder. Needs firmware 4.6 or newer (not 5.x). One 2025 report runs it on an Aura HD at firmware 4.38.23555.[9][11][15]

Good to know

  • NickelMenu installs by copying KoboRoot.tgz into the .kobo folder. It needs firmware 4.6 or newer and is not compatible with firmware 5.x.[9]
  • A built-in failsafe removes NickelMenu after a fatal error.[9]
  • A December 2025 forum post reports NickelMenu running on an Aura HD with firmware 4.38.23555.[11]

⚠ Watch out

  • Save the NickelMenu config as plain text. A config saved as rich text was reported to trigger a config error.[11]

Guides:NickelMenu

KOReaderWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Open-source document viewer for the full Kobo lineup, including the Aura HD. Install beside NickelMenu or KFMon from a one-click ZIP; on firmware 4.17 and newer, set ExcludeSyncFolders so Nickel does not index hidden folders.[15][10][12][13]

Good to know

  • The full Kobo lineup is supported, starting from the Touch. Standard launchers are NickelMenu and KFMon.[15]
  • NiLuJe’s one-click packages unpack a single ZIP to the Kobo root over USB and bundle KFMon and NickelMenu. The two launchers cannot both be active; a firmware update disables KFMon until you reinstall.[10]
  • Firmware 4.17 and newer need an ExcludeSyncFolders setting so Nickel does not index hidden folders.[15]

⚠ Watch out

  • Early 2013 Aura HD reports saw heavy standby drain with KOReader (about 20% over eight hours) while suspend support was still immature.[12]

Guides:One-Click Install Packages for KOReader & Plato - MobileRead ForumsInstallation on Kobo devices · koreader/koreader Wiki · GitHub

Replace the screenWorks
ScreenDifficulty: mediumOpens caseNo solderingReversible45 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Community iFixit guide: remove the front bezel, disconnect the battery connector, remove four display-corner screws, and separate the fragile glass from the frame. Touch does not work until the front bezel is back on.[5][3]

Good to know

  • iFixit rates the community screen guide Moderate and about 45 minutes.[5]
  • Display glass is stuck to the frame and is easy to break when separating. Touch does not respond until the front bezel is reinstalled.[5][3]
  • Step 3 pries the battery connector up, away from the board, before deeper work.[5]

Guides:Kobo Aura HD Screen Replacement - iFixit Repair Guide

Replace the batteryWorks
BatteryDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Open the case (screen guide path), disconnect the battery connector, soften the glue with isopropyl alcohol, and lift the Li-Polymer cell bit by bit.[6][5][4][8]

Special tools: isopropyl alcohol

Parts

  • 3.7 V 1500 mAh Li-Polymer (OEM SP305590 style) Fits with conditions — Listed for model N204-KBO-B, while Kobo and iFixit use N204B, so the fit is conditional.[8][4] Buy: batteryweb.com

Good to know

  • The battery is glued in place. Soften the glue with 99% isopropyl alcohol and lift the cell gradually.[6]
  • The stock pack is a 3.7 V 1500 mAh lithium-polymer cell.[4][8]

⚠ Watch out

  • Do not puncture the cell when prying it free. Dispose of the old pack responsibly.[6]

Guides:Kobo Aura HD Screen Replacement - iFixit Repair GuideSOLVED: I think my battery is starting to fail? - Kobo Aura HD - iFixit

Replace the internal microSDExperimental
StorageDifficulty: hardOpens caseNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

2013 method: open the back, remove the built-in microSD, and repartition a larger card on a computer. The write-up covers Aura HD (not the plain Aura); the author had not tried it.[14]

Good to know

  • The internal microSD expansion method covers the Aura HD, Glo, Mini, and Touch. The plain Kobo Aura is left out.[14]
  • Steps involve removing screws at the back, taking out the built-in card, and repartitioning on a computer (detail is in the linked 2013 video).[14]

⚠ Watch out

  • Opening the case can void the warranty. The 2013 author had not performed the mod themselves.[14]

Guides:How to Expand Internal Storage of Kobo eBook Readers (Video) | The eBook Reader

Replace the micro-USB portExperimental
ChargingDifficulty: expertOpens caseFine solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Community Answers path: remove the motherboard (via the screen teardown) and replace the surface-mount micro-USB connector. Needs SMD soldering; connector lug layouts differ.[7][5]

Good to know

  • The charging port is a surface-mount micro-USB part; SMD soldering tools and skills are required.[7]
  • Not all micro-USB connectors share the same lug count and position. Removing the motherboard is the preferred way to swap the connector.[7]

Guides:SOLVED: My charging port is broken - Kobo Aura HD - iFixitKobo Aura HD Screen Replacement - iFixit Repair Guide

Sources (15)

SOURCES.TXT