★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › Kobo › Kobo Glo

[ device photo ]NEW!

KOBO · E READER · 2012

Kobo Glo

Also called: Glo · N613 · Kobo Glo N613

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 15 sources · 3 item(s) unverified

Rakuten Kobo’s 6-inch E Ink Pearl reader with ComfortLight (model N613). NickelMenu or KFMon plus KOReader install from USB. Replacement OS projects list the Glo; a community screen guide exists but may mix Glo and Glo HD parts.[1][2][4][13][14][9][12]

5MODS
2WORK
3EXPERIMENTAL
15SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
N613Kobo Glo2012Light button beside the power slider on the top-right edge. Model number N613. Not the Glo HD (N437), which has a silver power button on the top edge. Kobo lists the Glo as no longer manufactured or supported; after May 25, 2023 updates go through Kobo Desktop, not OTA.[1][2][3]
Specs
Screen6-inch E Ink Pearl with front light[4]
CPU / RAMFreescale i.MX50x ~1 GHz, 256 MB RAM (wiki pages disagree on i.MX508 vs i.MX507)[4][5]
Storage2 GB internal; microSD expansion up to 32 GB[4]
BatteryLi-ion polymer 3.7 V 1000 mAh[4]
ConnectivityMicro USB; Wi-Fi 802.11b/g/n[4]
Firmware (wiki)Earliest listed 2.1.4; latest listed 4.31.19086 (conflicts with a 2023 Kobo 4.35+ note for older models)[5][6]

Mods (5)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

NickelMenu launcherWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Adds a custom menu to stock Kobo Nickel. Install by copying KoboRoot.tgz into the .kobo folder. Needs firmware 4.6 or newer (not 5.x); tested through 4.31.19086, which matches the Glo’s latest listed firmware.[9][13][15][5]

Good to know

  • NickelMenu needs firmware 4.6 or newer, has been fully tested on 4.20.14622 to 4.31.19086, and is not compatible with firmware 5.x.[9]
  • Install: download KoboRoot.tgz into the .kobo folder, safely eject, and wait for the reboot.[9]
  • KoboPatch WebUI lists NickelMenu for any Kobo released in 2025 or earlier on software 4.6 and above.[15]

Guides:NickelMenu

KOReaderWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Open-source document viewer. The Kobo Glo is a supported platform. Install beside NickelMenu or KFMon; on firmware 4.17 and newer, set ExcludeSyncFolders so Nickel does not index hidden folders.[13][14][10][11]

Good to know

  • The full Kobo lineup is supported from the Touch on. MobileRead’s KOReader page names the Kobo Glo among supported platforms.[13][14]
  • Standard launcher methods include NickelMenu and KFMon. KFMon ships a KoboRoot.tgz installer and an example config to launch KOReader.[13][10]
  • Firmware 4.17 and newer need ExcludeSyncFolders so Nickel does not index hidden folders.[13]
  • A 2024 Glo N613 owner tried a full-replacement OS route, then kept stock Kobo software with KOReader instead.[11]

Guides:Installation on Kobo devices · koreader WikiGitHub - NiLuJe/kfmon: Kute File Monitor, an inotify-based Launcher for Kobo devices · GitHub

InkBox OSExperimental
SoftwareDifficulty: expertCase stays closedNo solderingPermanent
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

GPLv3 open-source OS that replaces stock Kobo software. Lists the Glo N613 among supported devices.[7]

Good to know

  • InkBox is a GPLv3 eBook reader OS that completely replaces the stock Kobo OS and lists the Glo N613 among its supported devices.[7]

Guides:No guide found yet.

Quill OSExperimental
SoftwareDifficulty: expertCase stays closedNo solderingPermanent
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Replacement OS project that lists the Glo N613 as currently supported.[8]

Good to know

  • Quill-OS lists the Glo N613 among its currently supported devices.[8]

Guides:No guide found yet.

Replace the screenExperimental
ScreenDifficulty: mediumOpens caseNo solderingReversible

Community iFixit guide titled for the Kobo Glo: remove the back cover, disconnect the screen cables, remove the panel. The parts list names a Glo HD screen, and a commenter asks whether the guide is for Glo or Glo HD.[12]

Good to know

  • The guide’s three steps are remove the back cover, disconnect the screen cables, and remove the screen.[12]
  • The parts list names a “Kobo Glo HD Screen,” and a commenter asks whether the guide is for the Glo or the Glo HD.[12]

Guides:kobo glo ereader Screen Replacement - iFixit Repair Guide

Sources (15)

SOURCES.TXT