★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000054devices tracked

Home › Devices › SNK › Neo Geo Pocket Color

[ device photo ]NEW!

SNK · HANDHELD CONSOLE · 1999

Neo Geo Pocket Color

Also called: NGPC · New Neo Geo Pocket Color · Neo Geo Pocket Color Slim

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 9 sources · 1 item(s) unverified

SNK's 1999 color handheld, later revised in Japan as the Slim. The stock screen is a 2.6-inch reflective TFT with no backlight. Documented mods add a backlit IPS panel, a replacement shell, or new capacitors.[1][2][6][5]

3MODS
3WORK
0EXPERIMENTAL
9SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Neo Geo Pocket ColorOriginal (fat)1999Earlier case. Hispeedido Q5 IPS kits are sold for this fat body. Reflective 2.6-inch TFT, two AA cells, CR2032, microswitch thumbstick.[1][4]
New Neo Geo Pocket ColorSlim1999Japanese Slim revision. Capacitor kits cover original and Slim boards. The Hispeedido Q5 IPS kit does not fit the Slim.[1][6][4]
Specs
Screen2.6-inch reflective TFT, no backlight[1]
Power2× AA plus CR2032 sub-battery[1]
ControlsMicroswitch thumbstick (not a D-pad)[1]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Hispeedido IPS screenWorks
ScreenDifficulty: hardOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

A backlit IPS kit replaces the dark stock screen. The shell needs cutting (or an aftermarket shell), and the on-screen menu needs soldered wires or a touch pad.[2][3][4][9][8]

Parts

  • Hispeedido Super OSD IPS LCD kit Fits with conditions — Includes PCB, ribbon cable, glass lens, double-sided tape, and wires. The shell must be cut. Fat NGPC only; the Q5 kit does not fit the Slim.[3][2][4] Buy: k-retro.com · retrogamerepairshop.com

Good to know

  • The Hispeedido kit replaces the original non-backlit screen with a bright backlit IPS panel and an OSD for brightness, palettes, and scanlines.[2][3][4]
  • The display area is about 5% larger than the stock reflective LCD.[3][4] unverified
  • The kit needs the shell to be cut. An aftermarket replacement shell is the alternative.[9]
  • OSD control uses a touch sensor pad or thin wires soldered to motherboard button contacts.[2][4][9]
  • The Q5 kit is for the original fat NGPC and does not fit the Slim.[4]
  • BennVenn announced an LCD replacement kit for the NGPC.[8]

Guides:Installing an IPS-screen in a NeoGeo Pocket Color

Replacement housing shellWorks
CaseDifficulty: mediumOpens caseNo solderingReversible

Aftermarket full shell for the original fat NGPC. Useful when an IPS install would otherwise cut a rare original shell.[5][9]

Parts

  • NGPC replacement housing shell Fits with conditions — Thick (fat) NGPC only; it cannot be used on the thin machine. Use the screws supplied with the shell.[5] Buy: retrogamerepairshop.com

Good to know

  • The shell is for the thick NGPC only; the thin machine cannot use it.[5]
  • A new shell lets an IPS kit go in without cutting an original case.[9]

⚠ Watch out

  • Use the screws supplied with the purchased shell when threading into fresh aftermarket plastic.[5]

Guides:No guide found yet.

Surface-mount capacitor kitWorks
RepairDifficulty: expertOpens caseFine solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Replace the aging SMD electrolytic capacitors on the board. Sets are sold for the fat and Slim boards.[7][6]

Parts

  • NGPC / Slim SMD capacitor set Fits with conditions — Sold for original and Slim variants. Follow the board-revision cap map.[6][7] Buy: retrogamerepairshop.com

Good to know

  • Console5 TechWiki lists SMD electrolytic maps for the 1998.12.18 and 1999.08.31 board revisions.[7]
  • Replacement sets are sold for original and Slim NGPC boards to replace the aging factory capacitors.[6]

⚠ Watch out

  • Remove old capacitors carefully to avoid damaging motherboard traces.[6]

Guides:No guide found yet.

Sources (9)

SOURCES.TXT