★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000054devices tracked

Home › Devices › Nintendo › Nintendo 3DS / 3DS XL

Nintendo 3DS / 3DS XLNEW!

Photo: Evan-Amos, Public domain · AI-edited (studio background)

NINTENDO · HANDHELD CONSOLE · 2011-2012

Nintendo 3DS / 3DS XL

Also called: 3DS · 3DS XL · CTR-001 · SPR-001 · Nintendo 3DS XL

✔ APPROVEDChecked fact by fact · last checked 2026-11-15 · 7 sources

The original Nintendo 3DS (CTR-001, 2011) and the larger 3DS XL (SPR-001, 2012). The 3DS Hacks Guide covers custom firmware for both, including Luma3DS and a magnet-and-flashcart recovery boot called ntrboot.[1][2][4][6][5]

3MODS
0WORK
3EXPERIMENTAL
7SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
CTR-001Nintendo 3DS2011Model CTR-001 is printed on the bottom. This is the first model, released February 2011.[1]
SPR-001Nintendo 3DS XL2012Model SPR-001 is printed on the bottom. The USA unit's label includes USA. Released July 2012 in Japan and August 2012 in North America.[2]
Specs
3DS screens3.53-inch autostereoscopic upper display, 3-inch resistive touch lower display[1]
3DS batteryNintendo CTR-003[1]
3DS XL screens4.88-inch upper display, 4.18-inch lower display[2]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Luma3DS custom firmwareExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingPermanent
  • ⚠ Can brick A mistake can leave the device unable to start.

Custom firmware for retail 3DS-family consoles. Hold Select at boot to open its configuration menu. Rosalina is an in-game menu for screenshots, filters, and cheats. LayeredFS swaps in modified game files.[3][4][6]

Parts

  • SD card, 2 GB to 128 GB Fits with conditions — Format as FAT32 with an MBR partition table. Use 2 GB to 128 GB. Cards of 200 GB and larger are not recommended.[4]

Good to know

  • The 3DS Hacks Guide covers the original 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL.[4]
  • The SD card must be FAT32 with an MBR partition table. The guide recommends 2 GB to 128 GB. A full NAND dump is about 1 GB, so the card should be at least 2 GB.[4]
  • Hold Select while turning the console on to open the Luma3DS configuration menu when the firmware is already installed.[3]
  • Rosalina can be opened during a game for screenshots, screen filters, cheats, and input redirection.[6]
  • LayeredFS replaces individual game files with modified files while the game runs.[6]
  • Luma3DS patches system modules on every hardware revision. It supports 3GX plugins, per-game language emulation, and a GDB debug stub.[6]

⚠ Watch out

  • Cards of 200 GB or larger can cause problems with DS and GBA graphics and with custom themes.[4]

Guides:Get Started | 3DS Hacks GuideKey Information | 3DS Hacks Guide

NAND backup and file browserExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

A full-access file browser for the SD card and the internal NAND. Use it to back up your own console, and to restore a console that will not boot.[7]

Good to know

  • GodMode9 gives raw access to the SD card, FAT partitions, and the SysNAND and EmuNAND.[7]
  • It is the tool for a full NAND backup and for restoring a console that will not boot.[7]

Guides:GitHub - d0k3/GodMode9: GodMode9 Explorer - A full access file browser for the Nintendo 3DS console · GitHub

ntrboot recovery bootExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.

Boot from a DS flashcart prepared as an ntrboot recovery cartridge. A small magnet triggers sleep while buttons are held. This path installs custom firmware or recovers a console that will not boot, on any system version.[5]

Parts

  • DS flashcart prepared for ntrboot Fits with conditions — A DS flashcart set up as the ntrboot recovery cartridge.[5]
  • Small magnet Fits — Triggers sleep mode at boot while buttons are held.[5]

Good to know

  • ntrboot lets every 3DS-family console boot from a recovery cartridge, on any system version.[5]
  • A small magnet triggers sleep mode while buttons are held at boot.[5]
  • The same boot is used to install custom firmware and to recover a console that will not boot.[5]

Guides:ntrboot | 3DS Hacks Guide

Buttons & modes

BUTTONS.TXT
WhatHow
Luma3DS configurationHold Select while turning the console on. The configuration menu opens when Luma3DS is already installed.[3]

Sources (7)

SOURCES.TXT