★ 109 device pages approved★ 1201 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 109 device pages approved★ 1201 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000115devices tracked

Home › Devices › Barnes & Noble › Nook Simple Touch GlowLight

Nook Simple Touch GlowLightNEW!

Photo: Tthaas, CC BY-SA 3.0 · AI-edited (studio background)

BARNES & NOBLE · E READER · 2012

Nook Simple Touch GlowLight

Also called: BNRV350 · Nook Glow · Simple Touch with GlowLight · NSTG

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 17 sources · 2 item(s) unverified

2012 Simple Touch with front GlowLight LEDs (BNRV350, Android 2.1). Root with GlowNooter or TinyNoot from microSD, back up first, then battery, screen, charging-port, and back-cover repairs. Not the later 2013 Nook GlowLight.[1][7][9][10][3]

10MODS
8WORK
2EXPERIMENTAL
17SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
BNRV350Simple Touch with GlowLight2012About Your NOOK shows the model. Grey frame and GlowLight LEDs. B&N lists BNRV350 (2012–2024). Not the October 2013 Nook GlowLight.[1][7][17]
Specs
Battery3.7 V, 1530 mAh (5.66 Wh); about 1 month with GlowLight on vs 2 months off[2][1]
Storage2 GB internal; microSD expansion (B&N Simple Touch help: up to 32 GB FAT32)[1][8]
OSAndroid 2.1 with B&N skin; Wi-Fi only[1]
Display stackFront glass, GlowLight LEDs, and digitizer fused; eight LEDs at the top edge[2]

Mods (10)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Backup before rootingWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Write a noogie-style backup utility to microSD and image the Glow so you can restore to stock. Same method as the original Simple Touch.[12]

Good to know

  • The backup and restore method for the original Nook Touch works the same on the Nook Glow.[12]
  • Needs a microSD card, a card reader, and a Windows PC for the guide as written.[12]

Guides:How to Backup and Restore Nook Glow and Nook Simple Touch

Root with GlowNooterWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

ClockworkMod microSD recovery, then GlowNooter packages including Google’s app market. Use the 1.2-updated package if you are on firmware 1.2.x.[9][14][13][11]

Good to know

  • GlowNooter is like TouchNooter for the original Touch, but installed through ClockworkMod recovery instead of writing a full card image.[9]
  • Steps: back up first, make a ClockworkMod microSD, install GlowNooter, then a market-fix package for the Android Market.[9]
  • If already rooted with TinyNoot, restore to stock before GlowNooter.[9]
  • Early GlowNooter froze on firmware 1.2; a January 2013 package was updated to work with 1.2.x.[14]
  • Firmware 1.2 updates may break rooted Glow devices; proceed with caution.[13]

⚠ Watch out

  • Follow rooting directions at your own risk. Make a backup first.[9]

Guides:How to Root Nook Glow Using GlowNooterGlowNooter Updated to Root GlowLight Nook Touch with 1.2 Firmware

Root with TinyNootWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

ClockworkMod microSD root without Google apps (Amazon app store instead). The author reports the GlowLight still works after root.[10]

Good to know

  • TinyNoot roots the Glow with ClockworkMod on microSD and does most of what a rooted Touch can do minus Google apps.[10]
  • The author reports the GlowLight still works after rooting.[10]

⚠ Watch out

  • Back up before rooting.[10]

Guides:How to Root GlowLight Nook Touch with TinyNoot

microSD card expansionWorks
StorageDifficulty: easyCase stays closedNo solderingReversible

Expand storage with a microSD / microSDHC card. B&N's Simple Touch help lists cards up to 32 GB, formatted FAT32.[8][1]

Good to know

  • The GlowLight has expandable microSD storage and 2 GB internal storage.[1]
  • B&N’s Simple Touch SD help page supports microSD/microSDHC up to 32 GB formatted FAT32; power off before inserting or removing.[8]

Guides:NOOK Simple Touch - Using SD Cards

Replace the batteryWorks
BatteryDifficulty: mediumOpens caseNo solderingReversible~5 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Open the back cover, detach the white connector, and remove the taped 3.7 V 1530 mAh pack. Needs a T4 Torx screwdriver.[3][2]

Special tools: T4 Torx screwdriver, opening tool

Good to know

  • Battery is rated 3.7 V and 1530 mAh (5.66 Wh), held by heavy tape.[2]
  • Detach the white cable connector from the motherboard, then remove the battery.[3]

⚠ Watch out

  • Never work on a device that is plugged into a power outlet.[3]

Guides:Nook Simple Touch with GlowLight Battery Replacement

Replace the screen assemblyWorks
ScreenDifficulty: mediumOpens caseNo solderingReversible~10 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the fused front glass / GlowLight LED / digitizer assembly. Breaking any layer means replacing the whole display.[4][2]

Special tools: opening tool, T4 Torx screwdriver

Good to know

  • Front glass, GlowLight LEDs, and digitizer are fused together.[2]
  • Disconnect the orange ribbon cable, then lift the motherboard from the display.[4]

Guides:Nook Simple Touch with GlowLight Screen Replacement

Replace the back coverWorks
CaseDifficulty: easyOpens caseNo solderingReversible

Remove the power button, one T4 Torx screw, then slide the cover toward the charging port.[6]

Special tools: T4 Torx screwdriver

Good to know

  • Remove the power button with your fingers, then the single T4 Torx screw that holds the back cover.[6]

Guides:Nook Simple Touch with GlowLight Back Cover Replacement

Replace the charging portWorks
ChargingDifficulty: hardOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

The microUSB port is soldered to the motherboard. Replacing the whole board is easier than desoldering the port alone.[5]

Special tools: soldering iron, T4 Torx screwdriver, opening tool

Good to know

  • The charging port is soldered to the motherboard, so replacing the entire motherboard is easiest.[5]

⚠ Watch out

  • A soldering iron is very hot and can damage your hands or the device.[5]

Guides:Nook Simple Touch with GlowLight Charging Port Replacement

FastMode + USB Sound ROMExperimental
AudioDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Community ROM that adds audio through the USB port plus FastMode. The developer says it is compatible with the Simple Touch and the Simple Touch with GlowLight.[16]

Good to know

  • USB Sound adds audio support via the USB port; the ROM is fully compatible with the Simple Touch and Simple Touch with GlowLight.[16]

Guides:No guide found yet.

Tweaked Modded ROMExperimental
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

2014 community ROM for Nook Touch and GlowLight based on B&N 1.2.1-era firmware.[15]

Good to know

  • A Tweaked Modded ROM was posted for the Nook Touch and Nook Touch with GlowLight.[15]

Guides:No guide found yet.

Sources (17)

SOURCES.TXT