Home › Devices › Olympus › Olympus Trip 35
NEW!Photo: Michael Gatchell, CC BY 2.0 · AI-edited (studio background)
OLYMPUS · CAMERA · 1967-1984
Olympus Trip 35
Also called: Trip 35 · Olympus Trip
Battery-free 35mm compact with a selenium meter and two shutter speeds. Common work is cleaning sticky aperture and shutter blades; deeper mods add manual speed and aperture control or boost the meter for faster film.[5][7][2][1][4]
Which one do I have?
Specs
Mods (3)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Clean sticky aperture and shutter bladesWorks
Oil that creeps onto the blades makes them sluggish or stuck. Remove the front lens group and clean each blade; the shutter often works again without other mods.[2][3][8]
Special tools: jeweller's screwdriver set
Good to know
- Oil on the blades is the usual cause of sticky aperture or shutter action.[2][3]
- Electronics cleaner works; lighter fluid also works but dries slowly.[2]
- A Trip that will not raise the red low-light flag may still have a working meter; gummed blades are a common fault instead.[8]
- Mark the lens threads before reassembly so the front group goes back in the same position.[2]
⚠ Watch out
- Do not push a blade toward its hinge when cleaning; pull each blade through a cloth sandwich.[2]
Guides:Cleaning Aperture and Shutter Blades on the Trip 35 and Pen Family
Manual shutter speed and apertureWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Cut the meter link and reshape the speed lever so you choose 1/40 or 1/200 by flipping the camera, and set aperture by hand. Automatic exposure is gone after this.[1][5]
Special tools: jeweller's screwdriver set, soldering iron
Good to know
- After the mod the camera is manual-only; automatic exposure is lost.[1]
- Speed is chosen by turning the camera upside down: 1/200 with the flash connector up, 1/40 with it down.[1]
- The stock shutter only has 1/40 and 1/200; this mod does not add 1/125 or 1/30.[1][5]
⚠ Watch out
Guides:Adding Manual Shutter-Speed Control to the Olympus Trip 35 (and Pen EE cameras)
Meter boost for ISO 3200 filmExperimental
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
A small circuit powered by a CR3032 coin cell boosts the selenium meter output so auto exposure can handle film around ISO 3200. One published build; still experimental.[4]
Special tools: soldering iron, drill
Parts
- CR3032 coin cell Fits with conditions — Powers the boost circuit in the published build; housing was improvised from a film canister.[4]
Good to know
- The stock meter is designed for film up to ISO 400.[4]
- The published build uses a CR3032-powered circuit for about three stops of extra meter speed.[4]
- The build drilled the baseplate, cut wires, and used a part from a broken donor camera.[4]
- The author's test roll (Ilford Delta 3200) came out about a stop under.[4]
⚠ Watch out
- The coin-cell housing in the published build was improvised and hung from wires; treat it as a prototype.[4]
Guides:Modifying an Olympus Trip 35 for Shooting ISO 3200 Film
Sources (10)
- docs Adding Manual Shutter-Speed Control to the Olympus Trip 35 (and Pen EE cameras) · 2026-11-16
- docs Cleaning Aperture and Shutter Blades on the Trip 35 and Pen Family · 2026-11-16
- blog Our Camera Repair Desk This Week: 30 October 2023 · 2026-11-16
- blog Modifying an Olympus Trip 35 for Shooting ISO 3200 Film · 2026-11-16
- wiki Olympus Trip 35 - Wikipedia · 2026-11-16
- official Olympus TRIP 35 | OM Digital Solutions · 2026-11-16
- blog Olympus Trip 35 · 2026-11-16
- blog How to Shoot Night Photography with the Olympus Trip 35 · 2026-11-16
- shop Olympus Trip 35 - Matt's Classic Cameras · 2026-11-16
- shop The history of the Olympus Trip 35 · 2026-11-16