★ 200 device pages approved★ 2429 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 200 device pages approved★ 2429 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000206devices tracked

Home › Devices › Palm › Palm Centro

[ device photo ]NEW!

PALM · PHONE · 2007

Palm Centro

Also called: Centro · Centro 685 · Centro 690

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 17 sources

Last-generation Palm OS smartphone with a QWERTY keyboard and microSD. Common work is battery, screen, keyboard, speakers and back housing; Seidio's 2008 extended pack needs a thicker door.[12][2][3][9]

6MODS
5WORK
0EXPERIMENTAL
17SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Centro 690CDMA (Sprint / Verizon)2007CDMA Centro for Sprint and Verizon. Those CDMA networks have shut down, so these units work offline only.[14][12]
Centro 685GSM (AT&T)2008GSM model that went to AT&T after Sprint exclusivity. After AT&T’s 2G shutdown it could no longer connect on that network.[15][12]
Specs
Display320×320, 16-bit colour[1]
Battery1150 mAh Li-ion (user-removable)[1][8]
StoragemicroSD; maximum card size given as 4 GB or 8 GB[13][15][1]
OSPalm OS 5.4.9[12][15]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Battery swapWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible5 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Slide the cover, power off, press the pack right and lift it out. Use only a Palm-approved Centro pack; packs from other Centro models can damage the phone.[2][7][8][9]

Parts

  • Palm Centro extended battery (2008, ~1850 mAh) Fits with conditions — Thicker than stock; Palm EOL’d it quickly. One article says 1850 mAh, another 1800 mAh.[8][9]
  • Seidio Centro extended battery (2600 mAh) Fits with conditions — About 5 mm thicker; needs a replacement battery door (black at launch).[9]

Good to know

  • Press the battery to the right, then lift the pack out. Turn the phone off first.[2]
  • Palm’s manual: do not use a battery from another Centro model; only a Palm-approved battery will wake and power the phone.[7]
  • Palm’s 2008 extended kit was about 1850 mAh and thicker than the stock 1150 mAh pack.[8]
  • Seidio’s 2600 mAh pack needs a thicker door.[9]

Guides:Disassembling Palm Centro Battery - iFixit

Carrier ROM updateDiscontinued
SoftwareDifficulty: easyCase stays closedNo solderingPermanent
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Official Palm/carrier tune-ups (Verizon 1.03, Sprint 1.07). Backup with HotSync first; install at your own risk.[10][11][16][17]

Good to know

  • Verizon Centro ROM 1.03 was a minor tune-up; HotSync and SD installers for Windows. Full HotSync backup recommended.[10][11]
  • Sprint got firmware 1.07 earlier in summer 2008 (location services in Maps, email attachments, camera shutter sound, roaming list).[10][16][17]

Guides:No guide found yet.

Back housing replacementWorks
CaseDifficulty: mediumOpens caseNo solderingReversible

Replace the back case or open it to reach the internals. Battery comes out first.[5]

Good to know

  • Follow the iFixit back-housing guide to replace the back case or reach the internals.[5]

Guides:Palm Centro Back Housing Replacement - iFixit

Screen replacementWorks
ScreenDifficulty: hardOpens caseNo solderingReversible

Full strip-down with T5 Torx: battery, back housing, logic board, then lift the screen. New panel must sit under the memory-slot door tabs.[3]

Special tools: T5 Torx screwdriver, tweezers

Good to know

  • Lift and slowly remove the screen from the front panel, then set the new one in.[3]
  • New screen must sit under the plastic tabs for the memory slot door, or the door may not close.[3]

Guides:Palm Centro Screen Replacement - iFixit

Keyboard replacementWorks
Buttons & inputDifficulty: hardOpens caseNo solderingReversible

Full disassembly through back housing, logic board and screen, then pry the keyboard free of its tabs.[4]

Good to know

  • After the screen ribbon is out of the way, the keyboard is pried free of its tabs.[4]
  • Tape holds the speaker and keyboard connector tabs; peel it back before lifting.[4]

Guides:Palm Centro Keyboard Replacement - iFixit

Speaker replacementWorks
AudioDifficulty: mediumOpens caseNo solderingReversible

Replace the Centro speakers with a spudger and T5 Torx.[6]

Special tools: spudger, T5 Torx screwdriver

Good to know

  • iFixit guide shows how to remove and replace the Centro speakers.[6]

Guides:Palm Centro Speakers Replacement - iFixit

Sources (17)

SOURCES.TXT