★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000214devices tracked

Home › Devices › Palm › Palm Vx

[ device photo ]NEW!

PALM · PDA · 1999

Palm Vx

Also called: Palm Vx · 3Com Palm Vx

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 14 sources · 1 item(s) unverified

Anodized metal Palm OS handheld with a sealed Li-ion cell and no expansion slot. Common work is heat-opening the glued case for battery or screen; early uClinux is alpha and erases RAM.[1][5][3][13]

5MODS
2WORK
1EXPERIMENTAL
14SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Palm VxSilver anodized1999Released 4 October 1999 by 3Com as the 8 MB upgrade to the Palm V. Sources disagree whether it shipped with Palm OS 3.3 or 3.5.[11][1][6][9]
Palm VxClaudia Schiffer / colour editions2000Blue brushed-metal Claudia Schiffer Edition; champagne or millennium-blue limited colours also listed.[11][1]
Specs
Memory8 MB (vs 2 MB on Palm V)[11]
BatterySealed custom Li-ion cell (code E17A); about three to four weeks / up to one month reported[6][1]
ConnectivityInfrared and RS-232 serial; optional PalmConnect USB Kit (serial adapter)[6][8][14]
Expansion / audioNo expansion slot; audio listed as none[1]

Mods (5)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Sealed battery replacementWorks
BatteryDifficulty: hardOpens caseNo solderingPermanent20-30 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Heat the glued metal back, open the case, and replace the E17A-class Li-ion cell. Cut the battery wrapper instead of prying it off the fragile LCD.[5][4][7][6][2]

Special tools: hairdryer, plastic opening tools, scissors

Parts

  • E17A-compatible Li-ion cell Fits with conditions — PalmDB recommends Cameron Sino packs for V/Vx.[6][5]

Good to know

  • Front and back metal plates are glued to a plastic chassis with no screws. Heat only the edges (about 40 seconds on a hairdryer turbo) until the resin softens.[7][5]
  • Do not pry the battery off the LCD; cut the red plastic wrapper with scissors. The same glue holds the cell to the panel.[5][7]
  • iFixit troubleshooting says the battery is not serviceable; hobbyist guides say owners can replace it with careful disassembly.[2][6][5]
  • Palm V iFixit battery guide uses the same heat-and-pry approach; PalmDB says the procedure covers V and Vx.[4][5]

⚠ Watch out

  • Methods can permanently damage the device and injure you. Heating the metal case can cause burns; do not heat the screen.[5][3][7]

Guides:Palm V Battery Replacement - PalmDBPalm v Battery Replacement - iFixitOpening the Palm Vx Back Cover

Screen replacementWorks
ScreenDifficulty: hardOpens caseNo solderingPermanent30 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Heat each side of the case, pry with plastic tools, disconnect two screen ribbons and the battery connector, then lift the display. Rated difficult.[3][2]

Special tools: hairdryer, plastic pry bar

Good to know

  • Heat each side for 30 seconds; do not heat the screen. Do not use a metal screwdriver to pry.[3]
  • Disconnect two screen ribbons, then the battery connector, before the screen comes out.[3]
  • The green power button can fall out when the casing is removed.[3]
  • Touch problems usually mean the screen or digitizer needs replacing; try reset and contrast first.[2]

⚠ Watch out

  • Heating the metal case may cause burns.[3]

Guides:Palm Vx Screen Replacement - iFixit

Palm OS 3.5 upgradeDiscontinued
SoftwareDifficulty: easyCase stays closedNo solderingPermanent
  • ⚠ Data loss Can erase what is on the device. Back up first.

Official OS 3.5 upgrade was free for Vx owners. It overwrites handheld memory — back up first — then apply 3.5.2.[9][6]

Good to know

  • Palm OS 3.5 was a paid standalone upgrade, but Vx owners could upgrade free.[9]
  • The upgrade overwrites handheld memory; back up first. Palm recommended applying the 3.5.2 update afterward.[9]
  • Early units had DRAM problems that a firmware patch fixed.[6]

Guides:No guide found yet.

uClinux (Palm Linux Environment)Experimental
SoftwareDifficulty: expertCase stays closedNo solderingPermanent
  • ⚠ Data loss Can erase what is on the device. Back up first.
  • ⚠ Can brick A mistake can leave the device unable to start.

2003 alpha project to run uClinux on Palm handhelds. Vx is listed but partly untested. Loader erases all RAM; serial at 9600 baud.[13]

Good to know

  • Vx appears in the hardware status table with several cells still marked as needing testing.[13]
  • PalmLoader erases all handheld RAM but does not touch ROM. Setup a direct serial connection at 9600 baud and start the loader.[13]
  • Alpha software with no warranty; the author was no longer actively working on the project.[13]

Guides:Palm Linux Environment

Cradle battery-drain “fix” (do not apply)Not possible
ChargingDifficulty: mediumCase stays closedBasic solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

PalmPilot-era cradle fix cuts the DSR line. Authors verified V-family units also drain in the cradle but recommend not modifying V-style units because they charge faster than they drain.[12][10]

Good to know

  • Palm V-family devices also drain in the cradle, but the authors recommend no modification for V-style units.[12]
  • The Vx power button could stick and drain the battery until data was lost.[10]

Sources (14)

SOURCES.TXT