Home › Devices › Polaroid › Polaroid Spectra / Image
POLAROID · CAMERA · 1986-2004
Polaroid Spectra / Image
Also called: Spectra · Image System · Polaroid Image · Spectra 2 · Spectra Pro · Spectra 1200 · Image 2 · ProCam · Minolta Instant Pro
Wide-format integral instant cameras (Spectra in North America, Image elsewhere) powered by the 6 V cell in each Spectra film pack. Polaroid Originals ended Spectra film and camera restoration in 2019 after ejection jams. Documented workarounds are moving film into a donor pack with a live battery, cleaning corroded contacts, and experimental external power taps.[10][4][7][3][2]
Which one do I have?
| Model | Variant | Year | How to tell |
|---|---|---|---|
| Spectra | Original Spectra / Image (folding body) | 1986 | First Spectra / Image folding body. In Europe and many markets the same line was sold as Polaroid Image.[8][10][7] |
| Spectra 2 | Spectra 2 / Spectra One naming | — | Manual text names Spectra 2; some PDF hosts title the same scan Spectra One. Use only Spectra film.[4][8] |
| Spectra Pro | Pro / glass-lens LCD model | 1990 | Top Spectra with glass lens and LCD controls. Minolta Instant Pro is a Polaroid-built Pro-class body.[10][8] |
| Spectra 1200 | 1200i / 1200si / 1200FF | 2000 | Later 1200-series Spectra bodies. Commenters claim some 1200 cameras need less motor power than earlier ones with modern packs.[8][2] |
| Image 2 | Image System / Image 2 | — | Listed with Image / Spectra film cameras. Spectra and Image share the wide Spectra film system.[8][10][3] |
Specs
| Film / power | Polaroid Spectra (type 1200 / Image) integral packs only; a fresh 6 V cell in each pack powers the camera[4][2][11] |
| Image size | About 92 × 73 mm (3.6 × 2.9 in) image area; wider than square 600 / SX-70[10][8][9] |
| Lens (Spectra One / Spectra 2 manual) | Quintic three-element 125 mm; apertures about f/10–f/45; shutter about 1/245–2.8 s; sonar autofocus[4] |
Mods (3)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Move film into a donor pack with a live batteryWorks
When a Spectra/Image pack does nothing because its built-in cell is dead, move the unexposed sheets in total darkness into an empty pack that still has a good ~6 V battery.[3][2][6]
Good to know
- Integral Spectra / SX-70 / 600 packs carry the battery that powers the camera; a dead pack battery can leave film trapped with no motor response.[3][2][6]
- The Instant Options method moves each sheet into an empty donor pack that still reads about 6 V, then reseats the darkslide, all in complete darkness.[3]
- Some Spectra/Image packs have 12 exposures instead of 10.[3]
- A live donor battery does not revive dried chemical pods; moved expired film can still yield blank or ruined prints.[3]
⚠ Watch out
Clean corroded film-pack battery contactsWorks
On vintage Polaroids, dirty or oxidized copper spring contacts in the film compartment can starve the motor and flash even when the pack battery is good.[6]
Good to know
- Polaroid lists weak pack/camera batteries, a defective eject mechanism, and corroded contacts as causes of photos not ejecting.[6]
- The camera contacts are two copper springs at the bottom of the film compartment; cleaning them or reseating the pack can scrape off oxidation.[6]
- Leaving a vintage camera open drains the film-pack battery because the pack powers flash and ejection.[6]
⚠ Watch out
- If the motor runs but nothing ejects with a fresh pack, Polaroid treats the camera as defective and needing repair.[6]
External auxiliary power connectorExperimental
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
- ⚠ Stored charge Capacitors keep a dangerous charge after the device is off.
Drill into the bottom power contacts and wire an external 6–7 V pack (some builders use 7.4 V Li-ion) so the camera is not limited to the film-pack cell. Forum reports only.[2][1][7][5][4]
Special tools: Drill, Soldering iron
Good to know
- Commenters report Spectra ejection failures as pack batteries being too weak, and say adding an extra power connector plus battery restored cameras that had failed.[2] unverified
- One description: drill two holes at the bottom power connectors, solder a power jack, and connect a 6–7 V battery pack.[2] unverified
- Another commenter used a 7.4 V Li-ion pack on modified Spectras.[2] unverified
- A repair shop that tried auxiliary battery sources (plus motor swaps and roller shims) could not get a reliable large-scale fix and stopped Spectra repairs in 2017.[1]
- Polaroid Originals said factory battery tests at different voltages and currents still found no simple fix for random Spectra ejection faults.[7][5]
⚠ Watch out
- No published install steps exist; commenters only offered photos and a parts list on request.[2]
- The official Spectra manual warns against disassembly because of electrical shock risk; flash circuitry can hold charge.[4]
- Drilling the body is permanent. Retrospekt found auxiliary power alone was not a reliable shop-wide fix.[2][1]
Guides:No guide found yet.
Sources (11)
- blog Saying Goodbye to Polaroid Spectra Film: 2019 the End of Spectra · 2026-11-16
- blog Polaroid Spectra / Frustrating Beauty – By Bill Thoo · 2026-11-16
- docs FAQs – Swapping Integral Batteries – Instant Options · 2026-11-16
- docs Polaroid Spectra One User Manual PDF | Manualsnet · 2026-11-16
- blog Saying Goodbye to the Polaroid Spectra - Mis.Steps · 2026-11-16
- official Why are my photos not ejecting? – Polaroid Support · 2026-11-16
- news RIP, Spectra – Polaroid discontinues film and no longer restores old cameras · 2026-11-16
- wiki List of Polaroid instant cameras – Wikipedia · 2026-11-16
- forum What's the difference between Polaroid i-Type, 600, SX-70, and Spectra film? · 2026-11-16
- blog Polaroid Spectra – Almost Instant - Photo Thinking Camera Review · 2026-11-16
- shop What Type of Battery Does Polaroid Use? · 2026-11-16