★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 83 device pages approved★ 844 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000086devices tracked

Home › Devices › reMarkable › reMarkable 2

[ device photo ]NEW!

REMARKABLE · E READER · 2020

reMarkable 2

Also called: RM2 · rM2 · RM110 · RM113 · RM114

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources · 1 item(s) unverified

10.3-inch e-paper tablet with 8 GB storage and a built-in Li-ion pack. Community mods start with root SSH, then Toltec packages, freeMarkable/XOVI, xochitl patches, and the rm2fb framebuffer shim — all version-sensitive.[2][3][10][12]

6MODS
3WORK
3EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
RM110reMarkable 2—Model number RM110; also seen as RM113 or RM114.[2][1]
Specs
Display10.3-inch e-paper[2]
Storage8 GB internal (~6.5 GB free after OS)[3][2]
BatteryBuilt-in rechargeable 3000 mAh Li-ion, up to ~2 weeks[3][1]
ChargeUSB-A to USB-C cable in box; third-party USB cables OK[4]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Root SSH accessWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Dropbear SSH already accepts root. Read the password and IP from Settings → Help → Copyright and licenses. Newer OS builds may need a USB step for Wi-Fi SSH.[12][14]

Good to know

  • SSH lets you connect as root with no extra config. Password and IP come from Copyright and licenses (paths differ by OS version).[12]
  • On RM2 OS above 3.20, Wi-Fi SSH needs a USB step (rm-ssh-over-wlan on). Write down the password — losing it needs Emergency Recovery.[12]
  • Official Developer Mode docs do not apply to reMarkable 1 and 2.[14]

Guides:SSH Access — reMarkable Guide

Toltec package managerWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Community opkg repo for reMarkable apps and tools. Bootstrap over SSH after checking the script hash. Stay inside the supported OS range.[10][11][13][16][15]

Good to know

  • Toltec supports OS builds from 2.6.1.71 to 3.3.2.1666. Install by fetching the bootstrap script over SSH and verifying sha256 first.[10]
  • Uninstall with toltecctl uninstall before any factory reset. Factory reset with third-party software installed can soft-brick the device.[10][13]
  • A GitHub issue reports a soft-brick stuck on the starting screen after toltecctl uninstall on OS 2.15.1.1189. A maintainer first suspected a ddvk package crashed while reverting; later comments doubt that.[16]
  • OS 3.23 is beyond Toltec's range; downgrading that far is risky, and updates can break rm2fb until patched again.[15]

⚠ Watch out

  • Do not factory reset while Toltec is installed.[10][13]

Guides:ToltecToltec — reMarkable Guide

freeMarkable (XOVI / AppLoad / KOReader)Works
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Python GUI toolkit that installs XOVI and AppLoad over USB (optional KOReader). Prefer USB; keep the tablet charged.[9]

Good to know

  • freeMarkable works with reMarkable 1, 2, and Paper Pro. It installs XOVI plus AppLoad and can add KOReader and a triple-tap power launch.[9]
  • Use a USB cable; Wi-Fi is not recommended. Keep the device charged during install. Host needs Python 3.10+.[9]

Guides:GitHub - wowitsjack/freeMarkable

ddvk xochitl binary patchesExperimental
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

SSH one-liner patches the stock UI binary for extra features. Firmware-pinned and EULA-violating per the project README.[6][7]

Good to know

  • ddvk/remarkable-hacks patches xochitl over SSH. Latest listed rm2 support was 2.15.1.1189 — older than many current 3.x builds.[6][7]
  • README warns of crashes and data loss, says do not factory reset when reverting, and states use violates the reMarkable EULA.[6]

Guides:GitHub - ddvk/remarkable-hacks

rm2fb framebuffer shimExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Beta layer so third-party apps can draw to the RM2 screen. Check your xochitl version; install via Toltec when supported.[8][10]

Good to know

  • ddvk/remarkable2-framebuffer (rm2fb) is a fake framebuffer shim marked beta. Confirm xochitl is in the supported list before installing.[8]
  • Packaged through Toltec, which sets up the server and client parts.[8]

Guides:GitHub - ddvk/remarkable2-framebufferToltec

Battery replacementExperimental
BatteryDifficulty: expertOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Built-in Li-ion pack. One revival write-up says a battery swap plus firmware update restored a four-year-old unit.[1][3][5]

Good to know

  • The pack is a 3000 mAh Li-ion cell, built in.[1][3]
  • A Cornford & Cross post says replacing the battery and updating firmware revived an unresponsive four-year-old RM2.[5]

Guides:No guide found yet.

Sources (16)

SOURCES.TXT