★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Sony › Sony Cyber-shot DSC-F828

[ device photo ]CUSTOM FW!

SONY · CAMERA · 2003-2005

Sony Cyber-shot DSC-F828

Also called: DSC-F828 · F828 · Sony F828 · Cyber-shot F828

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 7 sources

2003 bridge camera with an 8 MP RGBE CCD and a swivel lens turret. The well-known mod is a temporary magnet hack that moves the built-in IR-cut filter for infrared shooting; MaxMax also offered a permanent IR+visible conversion. A short iFixit guide covers a loose turret.[6][2][1][5]

4MODS
4WORK
0EXPERIMENTAL
7SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
DSC-F828Cyber-shot F8282003Announced 15 August 2003; discontinued 2005 and succeeded by the DSC-R1.[6][1]
Specs
Sensor8 MP 2/3-inch RGBE four-colour CCD; last commercial camera with a 4-colour sensor[4][6]
Screen / EVF1.8-inch rear LCD, 134,000 dots; electronic viewfinder also present[6][4]
StorageMemory Stick / Memory Stick PRO, CompactFlash Type I/II, Microdrive[1][6][4]
BatterySony InfoLithium NP-FM50, 7.2 V Li-ion[4][1]
Filter thread58 mm[4]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Temporary IR (magnet hack)Works
OpticsDifficulty: easyCase stays closedNo solderingReversible5-15 min

Hold a neodymium magnet on the lens barrel so the internal IR-cut filter swings aside. The camera becomes full-spectrum until you power-cycle it; nothing inside is altered.[2][3][4]

Parts

  • Neodymium magnet (~15×15 mm) Fits — 15×15 mm worked; smaller 10×5 mm magnets were too weak. Try polarity and position on the barrel.[3][2]
  • 58 mm IR-pass filter (e.g. R72 / ~760 nm) Fits — Any 58 mm IR filter fits the F828 thread. R72 and ~760 nm are commonly used; sensitivity falls off past about 950 nm.[4][2][3]

Good to know

  • An external magnet moves the built-in visible-light / IR-cut filter out of the optical path so the sensor sees infrared.[4][2][3]
  • The effect is temporary: turning the camera off and on again returns the filter; authors say it does not harm the camera or require opening it.[2][4]
  • It works at any focus distance on the F828 once the magnet polarity and spot on the barrel are right.[2]
  • Autofocus can be less reliable with some IR filters (e.g. IR Chrome).[2]

Guides:Sony Cyber-shot DSC-F828 - Classic digital - Christopher J Osborne

Permanent IR + visible conversionWorks
OpticsDifficulty: noneOpens caseNo solderingReversibleservice turnaround
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Send the camera to a conversion shop that removes or replaces the internal IR-cut filter so the sensor sees roughly 330–1200 nm. Converted bodies need a colour-correction filter for normal colour shots.[1]

Parts

  • MaxMax DSC-F828 IR+visible conversion Fits — Historical MaxMax offer for this model; page says they can restore stock for return shipping only if you are not satisfied.[1] Buy: maxmax.com

Good to know

  • MaxMax describes a converted F828 seeing about 330–1200 nm versus about 380–750 nm stock.[1]
  • Modified cameras must use a colour-correction filter (MaxMax XNite-CC1) for normal non-IR pictures.[1]

⚠ Watch out

  • The MaxMax F828 page is marked historical; confirm the service is still offered before sending a camera.[1]

Guides:No guide found yet.

Tighten a loose lens turretWorks
RepairDifficulty: mediumOpens caseNo solderingReversible10 min

Open the face plate and retighten the turret screws when the swivel lens assembly feels loose.[5]

Special tools: JIS #00 screwdriver, ESD mat or grounding bracelet

Good to know

  • iFixit rates the loose-turret fix moderate difficulty and about 10 minutes with a JIS #00 screwdriver.[5]
  • A cable stays attached to the face plate and must not be pulled off.[5]

⚠ Watch out

  • Use a shock-free mat or grounding bracelet. Leave the lens cap on while working.[5]

Guides:How to Fix a Loose Turret on a Sony Cyber-shot DSC-F828 - iFixit Repair Guide

Firmware Ver. 2.0Works
SoftwareDifficulty: easyCase stays closedNo solderingPermanent15-30 min
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Sony's 2004 firmware update fixes wrong picture deletion in quick review and Memory Stick file damage after repeated USB copy/delete.[7]

Good to know

  • Firmware Ver. 2.0 addresses incorrect picture deletion with quick review and damage to pictures copied over USB.[7]
  • Files copied and deleted over USB several times could be damaged on the Memory Stick before this update.[7]

Guides:No guide found yet.

Sources (7)

SOURCES.TXT