★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Sony › Sony MZ-R500

[ device photo ]NEW!

SONY · MUSIC PLAYER · 2001

Sony MZ-R500

Also called: MZ-R500PC · MiniDisc Walkman · MD Walkman R500

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 15 sources · 2 item(s) unverified

Entry-level 2001 MiniDisc recorder with MDLP, optical/line in, and a single AA—no mic or remote jack. Common software work unlocks MZ-R900-style EEPROM features and ATRAC Type-R; one documented hardware project fits a Scosche FlyTunes Bluetooth transmitter (playback only).[9][14][10][3]

4MODS
2WORK
2EXPERIMENTAL
15SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
MZ-R500MZ-R500 / MZ-R500PC2001Introduced about January 2001. Silver bodies have a blue LCD window, blue bodies a clear window, black a yellow window. Entry-level MDLP recorder without mic or remote sockets.[9][14]
Specs
Size / weightAbout 83 × 28 × 76 mm, 113 g[9][15]
PowerOne AA cell; 3 V DC in (external supply does not recharge the cell)[14][9]
I/OOptical and line in; headphones only out—no mic, remote, or line-out jack[9][14]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

EEPROM feature unlockWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

In service mode, change two EEPROM values so the R500 gains fancy play modes, Personal Disk Memory, M-Timer, and auto time mark from the MZ-R900 family. Some extras still need an R900 remote or hardware the R500 never had.[10][9]

Good to know

  • For the R500 / R700 / G750 family the first EEPROM value becomes F7 and the second 7B (except MZ-N710).[10]
  • Changing the EEPROM values can add several MZ-R900 features on this unit.[9]
  • Date/time stamp needs a battery-backed clock only high-end models have; headphone/line selection circuits are also missing on the R500 amp.[10]

⚠ Watch out

  • Service mode can brick the machine; write down the original values first and run from AC adapter or a fresh battery. No guarantee of success.[10]

Guides:How to modify the Sony MZ-R700/R500/G750/N707/N505/N710's EEPROM settings to add features

Enable ATRAC Type-RWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.

Same service-mode path as the R700/G750: the R500 already has the Type-R DSP but ships in the older ATRAC 4.5 mode; flip it to Type-R.[11][12]

Good to know

  • The R700 hack also applies to the MZ-G750 and MZ-R500, which share a more advanced ATRAC DSP holding Type-R.[11][12]
  • Type-R was enabled on an MZ-R500 after the change.[12]

⚠ Watch out

  • A wrong step in service mode can destroy the recorder.[12]

Guides:MiniDisc > HackingMarlene's Musings: To hack or not to hack: Sony MZ-R 700 & MZ-R 900

Built-in Bluetooth transmitterExperimental
ConnectivityDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Fit a Scosche FlyTunes Bluetooth board inside the case, remove the recording head to make space, isolate audio with transformers, and (in v0.3) auto-start the module with an ATtiny13A. The unit becomes playback-only.[1][2][3][4][5][6][7][8]

Parts

  • Scosche FlyTunes Bluetooth transmitter module Fits with conditions — Desolder its own Li-Ion cell, USB-C jack, and LEDs; power from the MD’s battery through a Pololu 3.3 V regulator. Two ED8 600:600 transformers fix v0.1 audio interference.[3][7][5]
  • ATtiny13A auto power-up circuit Fits with conditions — v0.3 only: holds a pin high ~3.2 s at MD power-on so the transmitter starts without a separate press.[4][7]

Good to know

  • Removing the magnetic write head turns the Walkman into a playback-only device; End Search is rewired as the Bluetooth power/pairing button.[2][6]
  • v0.2 adds isolation transformers and a shutdown line so the module draws no power when the MD is off; v0.3 removes the write-protect plunger so discs read as write-protected and stop TOC hangs.[3][4]
  • Bluetooth range stays short because the antenna sits near the chassis. The idea should work on other models if the button traces are re-mapped.[4][7]

⚠ Watch out

  • Not a beginner project—needs electronics and soldering skill beyond the parts list.[2][8]

Guides:bluetooth-minidisc/docs/v0.2.md at master · 17o2/bluetooth-minidisc · GitHubbluetooth-minidisc/docs/v0.3.md at master · 17o2/bluetooth-minidisc · GitHubbluetooth-minidisc/docs/v0.1.md at master · 17o2/bluetooth-minidisc · GitHub

Painted shellExperimental
CaseDifficulty: mediumCase stays closedNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Mask the window and repaint the case (silver/blue with a translucent top coat). One forum owner spent about four days including drying; cheap tape can stain the window.[13]

Good to know

  • One Stereo2Go owner’s silver/blue paint job took about four days including drying and was harder than expected for a beginner.[13]

Guides:No guide found yet.

Sources (15)

SOURCES.TXT