Home › Devices › Sony › Sony PlayStation Eye (PS3 Eye)
SONY · CAMERA · 2007
Sony PlayStation Eye (PS3 Eye)
Also called: PlayStation Eye · PS3 Eye · PSEye · SLEH-00448 · SLEH-00201
USB 2.0 PS3 camera with a two-position zoom lens and a four-mic array. On PC it needs community drivers. Common hardware mods remove or bypass the IR-cut filter, fit band-pass filters, or mount a 1.25-inch telescope nosepiece on the M12 thread.[1][8][2][3][11]
Which one do I have?
| Model | Variant | Year | How to tell |
|---|---|---|---|
| SLEH-00448 | PlayStation Eye (common base marking) | 2007 | US launch with The Eye of Judgment on 23 October 2007. Check the model printed on the camera base; SLEH-00448 is reported on some units.[1][12] |
| SLEH-00201 | Later board / OV538 revision | — | Some units read SLEH-00201 (Namtai) with an OV538 chip versus older OV534 boards. IR-filter mods differ by hardware version.[2][12] |
Specs
Mods (4)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
PC / Linux / Mac driversWorks
Sony provides no official PC drivers. Use Code Laboratories CL Eye on Windows, the mainline gspca ov534 driver on Linux, or libusb drivers such as PS3EYEDriver on macOS and Windows.[1][8][7][5][6][4][10][11][9][2]
Good to know
- There is no official Sony support for running the PlayStation Eye on PC; community Mac and Linux drivers exist.[1]
- CL Eye Platform exposes the camera over DirectShow on Windows XP/Vista/7 (32/64-bit) at 15–125 fps in 320×240 or 640×480; the personal licence covers one camera, non-commercial.[8]
- Mainline Linux includes gspca ov534 with PS3 Eye enhancements (controls and extended FPS); it often works out of the box on modern kernels.[5][2][10]
- The camera is USB 2.0 high-speed only; a USB 1.x port will not work. Raw 640×480@60 needs more bandwidth than usable USB 2.0 can guarantee.[7]
- inspirit/PS3EYEDriver is a libusb driver for OS X and Windows, largely ported from the Linux kernel source.[6]
- pseye_unleashed patches ov534 and uses v4l2loopback plus OpenCV for raw Bayer processing and better image quality.[4]
⚠ Watch out
Guides:CL Eye Platform Driverjfrey-xx/pseye_unleashedNVIDIA Jetson TK1 - Sony PlayStation 3 Eye
External IR-pass filter (no open)Experimental
Some units respond to a 720 nm IR filter in front of the stock lens without removing the internal IR-cut filter. Useful when you do not want to open the camera.[12]
Parts
- 720 nm IR-pass filter Fits with conditions — Forum reports of success on a 'bad version' unit with zero internal modding; not independently verified here.[12]
Good to know
- Forum users say some cameras still work for IR with a darkening or 720 nm filter over the lens and no internal change.[12] unverified
Guides:No guide found yet.
Remove IR-cut filter / insert band-passWorks
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Open the lens holder, cut or pull the stock IR-blocking filter, and optionally seat an 850 nm-class band-pass filter between sensor and lens for IR or multitouch work.[3][11][12][13][2]
Special tools: Hobby knife, Small screwdrivers
Parts
- 10–11.4 mm near-IR band-pass filter Fits with conditions — A 10 mm 850 nm filter needed the plastic hole enlarged; an 11.4 mm 842DF33 fit inside the PS3 lens without carving.[3]
Good to know
- Hackers open the PS3 Eye and remove the IR filter to make an IR camera; the stock filter blocks infrared.[11][3]
- Two hardware versions exist; one is a little easier to modify. On some 'bad' versions the IR filter is part of a thick lens that hurts sharpness if removed.[12][13]
- One approach swaps in a security-camera lens whose IR filter pulls out cleanly, then files the mount for focus.[13] unverified
⚠ Watch out
1.25-inch telescope nosepieceWorks
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Open the case, remove the stock lens, and fit a 1.25-inch telescope nosepiece on the M12 board mount for astrophotography.[2]
Special tools: Screwdrivers, Hacksaw (if foot screw will not turn)
Parts
- 1.25-inch nosepiece for M12 holder Fits with conditions — Ready-made nosepiece for a standard M12 board lens holder. Some stock lenses are glued; one builder reused an Xbox Live Vision lens holder and trimmed legs to fit.[2]
Good to know
- Four screws hide under covers; the seam is then popped. Opening is surprisingly tricky.[2]
- If the heavy foot screw will not turn, the foot can be cut off with a hacksaw.[2]
- The IR filter for this build sits as a threaded filter on the nosepiece path.[2]
⚠ Watch out
- Lens clips break easily if forced. Test images were still pending when the build report was written.[2]
Sources (13)
- wiki PlayStation Eye - Wikipedia · 2026-11-16
- blog Astro-Beano: PS3 Eye Camera for astrophotography · 2026-11-16
- blog PS3 Eye Camera Band Pass Filter Insertion · 2026-11-16
- official jfrey-xx/pseye_unleashed · 2026-11-16
- official linux/drivers/media/usb/gspca/ov534.c · 2026-11-16
- official inspirit/PS3EYEDriver · 2026-11-16
- official PS3Eye - Not your typical webcam · 2026-11-16
- official CL Eye Platform Driver · 2026-11-16
- blog Using a PS3 eye toy with OpenCV · 2026-11-16
- blog PS3 Eye Driver Patch · 2026-11-16
- blog NVIDIA Jetson TK1 - Sony PlayStation 3 Eye · 2026-11-16
- forum Any tips on removing IR filter on PS3 camera? · 2026-11-16
- forum Newer PS3 Eye for headtracking · 2026-11-16