★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000237devices tracked

Home › Devices › Sony › Sony VAIO P

[ device photo ]NEW!

SONY · LAPTOP · 2009-2010

Sony VAIO P

Also called: VAIO type P · VAIO Palmtop · VGN-P · VPC-P11 · VPCP11

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 16 sources · 1 item(s) unverified

Ultra-wide 8-inch palmtop (1600×768) with soldered RAM and a 1.8-inch ZIF drive bay. Documented work includes ZIF SSD swaps, Linux installs, a 2009 US HSDPA/SIM solder mod, and an unfinished open-source replacement mainboard for the P720K.[14][16][12][6][4]

4MODS
3WORK
1EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
VGN-P500First generation (Jan/Feb 2009)2009First VAIO P wave. US WWAN units are Verizon EV-DO without a usable SIM slot.[14][8][5]
VGN-P600Mid 20092009July 2009 refresh of the first-generation VAIO P.[14]
VGN-P700P720K and siblings (Oct 2009)2009Includes P720K — the only model named as the target for the open-source replacement mainboard. Board shape and connectors differ from earlier/later gens.[14][4]
VPC-P11VPCP11 / P11Z (May 2010)2010Later VPC-P11 series with larger battery ratings. Documented Ubuntu install and ZIF SSD swap on a P11Z; mSATA attempt logged on a VPCP11.[14][12][11]
Specs
Display8-inch LED-backlit ultra-wide LCD, 1600×768; backlight driver lives on the motherboard[14][16][1]
RAMSoldered to the motherboard; not upgradeable[14][15]
Storage1.8-inch ZIF (a reader comment names a Toshiba MK6028GAL 60 GB HDD); configs also listed 80 GB HDD or 64/128/256 GB SSD. Stock SSD path is PATA behind a SATA-to-PATA converter on later units[9][10][15][11]
BatteryLaunch: standard 2100 mAh / extended 4200 mAh. VPC-P11: standard 2500 mAh / extended 5000 mAh. Sony Japan claims ~4.5 h / ~9 h; T2 Linux measured ~3 h / ~8 h[14][16][13]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

1.8-inch ZIF SSD swapWorks
StorageDifficulty: mediumOpens caseNo solderingReversible30-60 min
  • ⚠ Data loss Can erase what is on the device. Back up first.

Replace the stock 1.8-inch ZIF drive with another ZIF PATA SSD. A 2.5-inch drive does not fit; mSATA in the mPCIe slot failed on one VPCP11.[12][10][9][11]

Parts

  • 1.8-inch ZIF PATA SSD Fits — Mtron 32 GB ZIF PATA fitted in a P11Z. Stock is a Toshiba 1.8-inch ZIF HDD per a 2009 comment. Some SSD configs used a Sony SATA adapter cable.[12][9][10]

Good to know

  • A P11Z owner fitted a Mtron 1.8-inch ZIF PATA 32 GB drive.[12]
  • The VAIO P uses 1.8-inch ZIF drives; a 2.5-inch drive is too large.[10]
  • On a VPCP11 the stock SSD is PATA behind a SATA-to-PATA converter; an mSATA SSD in the mPCIe slot did not work.[11]
  • One iFixit answer claimed a 250 GB Samsung MLC SSD (implying 2.5-inch SATA) — conflicts with the 1.8-inch consensus.[10] unverified
  • To lift the keyboard: unscrew, pull it forward about 5 mm, then lift away.[12]

Guides:Ubuntu on a Vaio P11Z

Linux install (Ubuntu / T2)Works
SoftwareDifficulty: mediumCase stays closedNo solderingReversible1-3 hr
  • ⚠ Data loss Can erase what is on the device. Back up first.

Run Linux on the Atom/Poulsbo hardware. Early Ubuntu needed a memory limit on the kernel command line; WWAN and clean suspend are weak spots.[12][13]

Good to know

  • On a P11Z, adding mem=1800M to the kernel command line let Ubuntu boot the video driver.[12]
  • Wireless, Ethernet, Bluetooth, webcam, and SD reader worked; the WWAN modem did not appear under Linux on that install or in a T2 quick test.[12][13]
  • Suspend to RAM did not resume cleanly on the T2 test machine.[13]

Guides:Ubuntu on a Vaio P11Z

HSDPA / SIM slot for US WWANWorks
ConnectivityDifficulty: hardOpens caseFine solderingPermanent2-4 hr
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

US Verizon EV-DO units share the Qualcomm Gobi radio with European GSM models but have no usable SIM slot. Solder in a SIM slot and load GSM firmware in the connection manager.[5][6][7][8]

Good to know

  • US VAIO P WWAN is reserved for Verizon; the so-called SIM slot in the US unit was not made for SIM cards.[8]
  • The mod tricks VZAccess Manager into loading GSM firmware instead of stock EV-DO, and requires soldering in a SIM card slot.[5][6]
  • The hack is confirmed working for AT&T HSDPA but is not for beginners.[6][7]

Guides:No guide found yet.

Open-source replacement mainboardExperimental
OtherDifficulty: expertOpens caseFine solderingPermanentmany days
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Can brick A mistake can leave the device unable to start.

KiCad project that rebuilds the mainboard around a Pi Zero, RP2040 keyboard/EC, and LVDS conversion so a dead VAIO P shell can run again. P720K only; still unfinished.[4][1][2][3]

Special tools: stencil / reflow for 0402 parts

Parts

  • CRImier Sony VAIO P replacement PCB (KiCad) Fits with conditions — 75×65 mm, 4-layer, KiCad 8. README says untested and for P720K only — previous/next generations have different board shape and connectors. Author's own v1 boards are running.[4][2]

Good to know

  • The project is a start for a replacement mainboard; the README still calls the published board untested.[4]
  • It targets the P720K and probably will not work for the previous or next generation because the board shape and connectors differ.[4]
  • Done so far: LCD over DPI with LVDS converter, RP2040 keyboard and embedded controllers, Pi Zero placement, backlight driver, right-side USB/charger connector, USB hub, EC recovery mode.[4]
  • The author's v1 PCB has been working; bring-up flashes the EC with MicroPython and tests part by part. An FET was added so the board can start from the charger with a dead battery.[2][3]
  • The LCD has an unusual LVDS pinout and its backlight driver chip sits on the motherboard.[1]
  • A homemade battery pack failed: Sony's connector has an extra proprietary-controller pin; reversing a salvaged BMS made the laptop release magic smoke (it still booted).[1]
  • The board must fit the thin VAIO shell, which caps component height.[2]

Guides:MyKiCad sony_vaio_p_re (replacement mainboard)

Sources (16)

SOURCES.TXT