★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000214devices tracked

Home › Devices › Sony › Sony VAIO PCG-C1

[ device photo ]NEW!

SONY · LAPTOP · 1998-2002

Sony VAIO PCG-C1

Also called: VAIO C1 · PictureBook · PCG-C1XD · PCG-C1XN · PCG-C1VN · PCG-C1MV

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 13 sources · 1 item(s) unverified

Ultra-wide PictureBook ultraportables. Swap the 2.5-inch IDE drive (or IDE-to-mSATA on C1X), fit Sony high-capacity packs (discontinued), and run old Linux installs with sonypi jogdial support.[1][2][5][9][10]

4MODS
2WORK
1EXPERIMENTAL
13SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
PCG-C1XD2nd gen, German QWERTZ (Pentium II / NeoMagic)—Second-generation PCG-C1X* family. Pentium II 400 MHz, 128 MB RAM, 8 GB HDD, NeoMagic graphics.[1][9][2]
PCG-C1XN2nd gen C1X teardown unit—Same PCG-C1X* disassembly path as C1XD. Author fitted IDE-to-mSATA SSD.[2][1]
PCG-C1VN3rd gen Transmeta Crusoe—First Crusoe C1. ATI Rage Mobility; user guide covers BP51A and optional BP52A/BP54 packs.[1][4][13]
PCG-C1MV4th gen 1280×600 sibling—20 GB HDD stock; 144-pin PC133 MicroDIMM up to 384 MB; USB 1.1. Upgrade write-up is for this sibling, not every C1.[1][8]
PCG-C1MTCensus model with 2005 teardown—Has a 2005 teardown write-up.[3] unverified
Specs
Display (early revisions)1024×480 ultrawide; later C1MV-era units use 1280×600[1][9]
Standard batteryPCGA-BP51A (ships not fully charged)[5]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Replace the hard drive (IDE / mSATA adapter)Works
StorageDifficulty: mediumOpens caseNo solderingReversible

Open the C1X chassis and swap the 2.5-inch IDE drive. One C1XN build used an IDE-to-mSATA SSD adapter. One C1MV owner fitted a 128 GB PATA SSD.[2][8]

Good to know

  • On a PCG-C1XN, the author fitted an SSD with an IDE-to-mSATA adapter after removing the battery, screws, side covers, keyboard and panel.[2]
  • On a C1MV, a 128 GB IDE (PATA) SSD worked; a SATA drive would not fit. Steps: disconnect the ribbon, remove the keyboard, then three drive screws.[8]

Guides:Sony VAIO PCG-C1XN disassembly guide

High-capacity battery packDiscontinued
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Sony sold optional PCGA-BP54 / BP52A packs. BP54 is about 3.5× the standard BP51A capacity and is discontinued.[5][4][6][7]

Parts

  • Sony PCGA-BP54 high-capacity pack Fits with conditions — Sony Japan lists ~68 Wh (11.1 V, 6200 mAh) and run times for C1XF/C1XE. Discontinued. Insert with VAIO logo facing down.[6][4]

Good to know

  • The standard pack is PCGA-BP51A. Optional high-capacity packs are PCGA-BP52A/BP54.[5]
  • Sony Japan marks PCGA-BP54 sold out / discontinued and about 3.5 times the capacity of PCGA-BP51A.[6]
  • Packs of different size classes cannot be used together.[6]

⚠ Watch out

  • Use only the supplied AC adapter. Do not put heavy objects on the power cord.[5]

Guides:No guide found yet.

Replace the CMOS battery (C1X)Works
BatteryDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

VL2020 cell on the board keeps date and time. Stuck to the motherboard; only needed if the clock resets.[2]

Good to know

  • CMOS battery is size VL2020 and is only needed for date and time.[2]
  • Remove it with care; it is stuck onto the motherboard.[2]

Guides:Sony VAIO PCG-C1XN disassembly guide

Install LinuxExperimental
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Owners ran Slackware, Debian and Red Hat on various C1 revisions. APM instead of ACPI on some units; sonypi drives the jogdial and PictureBook buttons.[9][10][11][12][13]

Good to know

  • On a C1XD, Slackware needed a PCMCIA CD boot parameter; the machine is APM-based (no ACPI). Jogdial was untested on that page.[9]
  • On a C1VE, Linux ran smoothly except suspend/resume. Boot often needs a Sony USB floppy; many CD drives will not boot.[10]
  • Kernel sonypi gives jogdial and PictureBook capture-button events. Some Crusoe models need fnkeyinit, which conflicts with ACPI.[11][10]
  • A GNU linux-c1 list existed to finish Crusoe C1Vx kernel support.[12]

Guides:Sony VAIO PCG-C1XD - SlackWikiLinux on the Sony PCG-C1VE

Sources (13)

SOURCES.TXT