★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Sony › Sony VAIO UX (UX280 / UX490)

[ device photo ]NEW!

SONY · LAPTOP · 2006-2007

Sony VAIO UX (UX280 / UX490)

Also called: VAIO UX · VAIO Micro PC · VGN-UX280P · VGN-UX490N · UMPC UX

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 11 sources · 4 item(s) unverified

Sony’s handheld Micro PC with a shared 4.5 in 1024×600 XBrite touchscreen. Enthusiast work from the late 2000s includes BGA CPU swaps to Core 2 Duo ULV chips, larger SSDs, and packing a Huawei 3G modem (and sometimes a tiny USB hub) inside the case—mostly expert soldering jobs.[11][1][4][5]

4MODS
1WORK
3EXPERIMENTAL
11SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
VGN-UX280PUX280P2006Core Solo U1400 at 1.2 GHz. US units include GPRS+EDGE; wireless list also has 802.11 a/b/g and Bluetooth. Early Core 2 Duo swaps used this body.[11][9][2]
VGN-UX490NUX490N (US)2007Later US UX with Core 2 Solo U2200 and solid-state storage. Featured in the well-known U7700 + 128 GB SSD + internal 3G build.[11][1]
VGN-UX390NUX390N (sibling)—Sibling UX with Core Solo U1500. Same 20 Wh battery and tested battery life as the UX280P in the UMPC Portal specs.[10]
Specs
Screen4.5 in XBrite TFT touchscreen, 1024×600 (all UX models)[11]
UX280P stockCore Solo U1400 1.2 GHz, 1 GB RAM, 40 GB HDD (80 GB variant also listed); 20 Wh battery (~1.8–2.2 h tested)[11][9]
UX490N stockCore 2 Solo U2200 1.2 GHz, 1 GB RAM, 48 GB SSD (US black model)[11][1]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Core 2 Duo ULV CPU swapExperimental
OtherDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
  • ⚠ Can brick A mistake can leave the device unable to start.

Desolder the stock Solo / Core 2 Solo BGA CPU and reball a U7600 or U7700 Core 2 Duo ULV in its place. Needs an infrared rework station.[2][3][4][1][7][8][6]

Special tools: infrared BGA rework station

Parts

  • Intel Core 2 Duo U7600 (1.2 GHz ULV) Fits with conditions — Documented on UX280 (replacing Core Solo) and UX490 (replacing Core 2 Solo). Stock UX280 chip naming conflicts between U1200 (one article) and U1400 (specs/wiki).[2][3][4]
  • Intel Core 2 Duo U7700 (1.33 GHz ULV) Fits with conditions — Used in the 2009 UX490 showcase build; article says it was overclocked to about 1.438 GHz.[1][7][8]

Good to know

  • The CPU is soldered to the board, so the swap needs an infrared soldering station and BGA reballing experience.[4][6]
  • Press reports from 2008–2009 describe working UX280/UX490 units after U7600/U7700 swaps, with one Engadget note of no excess heat on a tested machine.[4][2][1]

⚠ Watch out

  • The builder of one UX490 jokes that soldering the flexible circuitry is the hard part left to readers.[1]

Guides:No guide found yet.

Larger SSDWorks
StorageDifficulty: hardOpens caseNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Swap the UX490’s factory SSD for a larger one (one documented build used a 128 GB RunCore Pro IV). UX50 HDD/CF upgrades are a different international chassis.[1][8][7][3]

Parts

  • 128 GB RunCore Pro IV SSD Fits with conditions — Replaced a 48 GB stock SSD in the 2009 UX490 build. Earlier UX490 articles also mention a 32 GB stock figure—confirm what your unit shipped with.[1][8][3]

Good to know

  • The 2009 modded UX490 review documents a 48 GB → 128 GB RunCore Pro IV swap alongside the U7700 CPU change.[1][7]

Guides:No guide found yet.

Internal Huawei 3G modemExperimental
ConnectivityDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Fit a Huawei E169 / E169G (or later E172) USB 3G modem inside the chassis for HSDPA data and, on some builds, voice. US UX units already have EDGE; international UX50 builds needed the hand grip cut and raised about 2 mm.[5][1][7][8][6]

Parts

  • Huawei E169 / E169G USB 3G modem Fits with conditions — Documented inside UX490 showcase builds (up to 7.2 Mbps HSDPA, voice/SMS claimed). A commenter says the UX280 prototype used an external USB modem. Liliputing later names an E172 in a denser internal build.[1][7][5][6]

Good to know

  • Sony never sold a factory 3G UX; US models ship with EDGE, while the international UX50 uses a CF slot instead of that EDGE module.[5]
  • Fitting the modem on one UX50 build meant cutting a back hand grip and raising it 2 mm, then gluing it back. The article calls it not for newbies.[5]

Guides:No guide found yet.

Internal 4-port USB hubExperimental
ConnectivityDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Install a tiny 4-port USB hub inside the UX so several USB devices (modem, TV stick, GPS, etc.) can share one internal host port. Reported without enlarging the case on one build.[6]

Good to know

  • One build fitted an extremely tiny 4-port hub inside a UX that also held a Huawei E172, a Pinnacle PCTV HD Mini Stick and a GPS receiver, reportedly without enlarging the case.[6]

Guides:No guide found yet.

Sources (11)

SOURCES.TXT