Home › Devices › Sony › Sony Walkman NW-A40 series
SONY · MUSIC PLAYER
Sony Walkman NW-A40 series
Also called: NW-A45 · NW-A46 · NW-A47 · Walkman A40 · NW-A40
Touchscreen Walkman in 16 GB, 32 GB, and 64 GB sizes, with microSD and Bluetooth 4.2. MrWalkman custom firmware adds Bluetooth receiver mode and higher-end sound processing. A SCSI tool can change the destination region to lift the European volume cap. The battery is soldered in.[1][2][3][5]
Which one do I have?
Specs
Mods (4)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
MrWalkman custom firmwareWorks
- ⚠ Can brick A mistake can leave the device unable to start.
Community firmware (Reloaded / Reloaded+) adds Bluetooth receiver mode, high gain, a 10-band EQ, and sound features from higher-end Walkmans. Stock revert packages are published. FM radio, noise cancelling, and some other stock features are removed.[4][2][6]
Good to know
- MrWalkman publishes custom firmware for the Sony NW-A40 series.[4]
- Reloaded and Reloaded+ both add improved sound, high gain, Bluetooth receiver, a 10-band equalizer, DSEE HX AI and other DSEE HX modes, DC Phase Linearizer, Vinyl Processor, visualizers, and a hardware-accelerated UI.[2]
- Reloaded+ is described as a different sound signature with slightly improved battery life versus Reloaded.[2]
- FM radio, noise cancellation, language study, VPT Surround, and ClearAudio+ are removed. You can revert to stock firmware.[2]
- StockRevert packages for NW-A40 series custom firmware are linked from the MrWalkman page.[4]
- SonyWalkmanFirmwarePatcher is a utility for modifying Walkman firmware updates. Its live-device injection step works only on the NW-ZX300, not the NW-A40.[6]
⚠ Watch out
- If you rely on FM radio or noise cancelling, do not install this firmware, or plan to revert afterward.[2]
Guides:MrWalkman - Sony NW-A40Series custom firmwareCustom Sony Walkman firmware by MrWalkman (NW-A40, NW-ZX300, NW-WM1/A)
European volume-cap removalWorks
- ⚠ Check the law May break a law or rule where you live.
European models limit headphone volume. Changing the destination region with Rockbox's scsitool clears that cap.[3][7]
Good to know
Soldered battery replacementWorks
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
The NW-A45 battery is inside the case with no external screws. Replacing it needs a teardown and soldering.[5]
Good to know
- bunkai.biz documents NW-A45 battery replacement disassembly.[5]
- There is no screw on the outside; you have to find the internal release points to open the case.[5]
- Solder work is necessary to remove the battery, and the guide calls battery soldering dangerous work.[5]
Guides:SONY Walkman Battery Replacement NW-A45 Decomposition
Wampy interface addonExperimental
- ⚠ Can brick A mistake can leave the device unable to start.
An open-source interface addon for NW-series Walkmans. On the NW-A40 series it works only with the MrWalkman Walkman One firmware, not stock firmware.[8]
Good to know
- unknown321/wampy is an interface addon for NW series Walkmans.[8]
Guides:unknown321/wampy
Sources (8)
- official NW-A45/A45HN/A46HN/A47 | Help Guide | Specifications · 2026-11-16
- blog Custom Sony Walkman firmware by MrWalkman (NW-A40, NW-ZX300, NW-WM1/A) · 2026-11-16
- blog Removing the Volume Cap from European Sony Walkmans · 2026-11-16
- docs MrWalkman - Sony NW-A40Series custom firmware · 2026-11-16
- docs SONY Walkman Battery Replacement NW-A45 Decomposition · 2026-11-16
- docs roobscoob/SonyWalkmanFirmwarePatcher · 2026-11-16
- docs rockbox scsitool.c · 2026-11-16
- docs unknown321/wampy · 2026-11-16