★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 208 device pages approved★ 2530 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000214devices tracked

Home › Devices › Sony › Sony Walkman NW-WM1A / NW-WM1Z

[ device photo ]NEW!

SONY · MUSIC PLAYER · 2016

Sony Walkman NW-WM1A / NW-WM1Z

Also called: WM1A · WM1Z · Sony WM1 · Walkman Signature Series

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 13 sources · 2 item(s) unverified

Signature Series Android-free Walkman DAPs with 3.5 mm and 4.4 mm outputs. Community software includes the wampy UI addon and Walkman One custom firmware; a plug-in 4.4 mm ground-pin adapter is sold for these models. Sony says the built-in battery is not user-replaceable.[1][9][10][11][13][2]

4MODS
2WORK
2EXPERIMENTAL
13SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
NW-WM1AAluminium Signature Series (128 GB)2016Machined aluminium body. About 267 g. Internal storage is 128 GB.[6][7][1]
NW-WM1ZSignature Series (256 GB)2016Heavier Signature Series unit at about 455 g with 256 GB internal storage. Shares the same Sony help guide as the WM1A.[6][1][10]
Specs
Screen4.0-inch TFT, capacitive touch, white LED backlight[6]
StorageNW-WM1A 128 GB; NW-WM1Z 256 GB; microSD / microSDHC / microSDXC[6]
BatteryBuilt-in rechargeable lithium-ion; USB charge about 7 hours; about 500 charge cycles[6][4]
ConnectivityUSB 2.0 Hi-Speed; Bluetooth 4.2 (SBC, LDAC, aptX, aptX HD transmit)[6]
Outputs3.5 mm and 4.4 mm headphone jacks[9]
WeightNW-WM1A about 267 g; NW-WM1Z about 455 g[6]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

wampy UI addonWorks
SoftwareDifficulty: easyCase stays closedNo solderingReversible15-30 min
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Open-source interface addon for NW-series Walkmans. Adds Winamp-style skins, volume tables, per-song audio options and other UI features on stock firmware and on Walkman One.[11][12]

Parts

  • wampy (GitHub releases) Fits — Marked working on NW-WM1A and NW-WM1Z on both stock firmware and Walkman One; UI does not fill the screen on these models.[11]

Good to know

  • The project lists NW-WM1A and NW-WM1Z as working on stock firmware and on Walkman One, with the note that the UI does not fill the screen.[11]
  • Need at least 100 MB free on internal storage, and on Windows the internal volume should be named WALKMAN.[11]
  • Windows install is a downloaded exe; the device restarts twice during installation.[11][12]
  • After install, toggle the Hold switch to start wampy once the device has finished loading.[11]
  • Mac has no native installer; the project says you need to build its own tool.[12]

⚠ Watch out

  • Read the project's USAGE notes before installing; the addon has known quirks and bugs.[11]

Guides:wampy/INSTALL.md at master · unknown321/wampyGitHub - unknown321/wampy: Interface addon for NW series Walkmans

Walkman One custom firmwareExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Community custom firmware for these models. The wampy project lists Walkman One as a supported firmware target for the NW-WM1A and NW-WM1Z.[11][5][8]

Good to know

  • wampy's device table marks NW-WM1A and NW-WM1Z as working on Walkman One as well as on stock firmware.[11]

⚠ Watch out

  • Walkman One is unofficial community firmware; Sony's own update pages (Music Center for PC, manual 3.02 installer) cover stock firmware only.[5][8]

Guides:No guide found yet.

4.4 mm ground-pin adapterExperimental
AudioDifficulty: easyCase stays closedNo solderingReversible

Plug-in adapter made for the NW-WM1A and NW-WM1Z that grounds a shielded 4.4 mm cable to the player's chassis through a short ground pin into the 3.5 mm jack area.[13]

Parts

  • ddHiFi DJ44S M1 Fits — Maker says it is designed exclusively for the NW-WM1A and NW-WM1Z. Fit and sound claims are the maker's own.[13] Buy: audio46.com

Good to know

  • The maker says the DJ44S M1 is designed exclusively for the NW-WM1A and NW-WM1Z.[13]
  • The maker says Sony DAP 4.4 mm jacks are not chassis-grounded, and that the adapter's shorter ground pin keeps chassis ground through the 3.5 mm side without damaging the jack when inserted straight.[13]

⚠ Watch out

  • Do not insert the adapter at an angle; the maker says that can damage the 3.5 mm jack.[13]
  • Sound-improvement claims are the maker's own.[13]

Guides:No guide found yet.

Battery replacement (Sony service)Works
BatteryDifficulty: expertOpens caseNo solderingPermanent
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Built-in lithium-ion pack. Sony says do not replace it yourself; use Sony service and a designated battery.[2][3][4][7]

Good to know

  • Sony says do not replace the battery yourself; it needs professional skills and a designated pack. Commercially available batteries cannot be used.[2]
  • Sony advises considering a replacement when battery life is about half of normal.[3]
  • Sony rates the built-in cell at about 500 charge cycles on average.[4]
  • Sony developed a dedicated WM1-series battery pack with separate + and − cables.[7]

⚠ Watch out

  • Sony says not to replace the battery yourself; use Sony's service.[2]

Guides:No guide found yet.

Sources (13)

SOURCES.TXT