★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Worlds of Wonder › Teddy Ruxpin

[ device photo ]NEW!

WORLDS OF WONDER · OTHER · 1985

Teddy Ruxpin

Also called: Ruxpin · Worlds of Wonder Teddy Ruxpin · Wicked Cool Toys Teddy Ruxpin

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 18 sources · 1 item(s) unverified

Talking animatronic bear. Cassette-era Worlds of Wonder units get WiFi speech and servo rebuilds; the 2017 Wicked Cool Toys model gets USB custom stories, eye-bitmap edits, and AA battery repair.[16][4][1][14]

6MODS
5WORK
1EXPERIMENTAL
18SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Worlds of Wonder Teddy RuxpinCassette (1985–1990)1985Metal tape deck on Version 1. Three motor connectors (jaw, upper jaw, eyes) on the original board in the Chippy build. Stuck motors and broken cassette mechanisms are common.[6][4][18][16]
#17262DS2017 Wicked Cool Toys digital2017LCD eyes in the face, Bluetooth app, USB story loading. Ships with three stories; stories 4–10 are paid in-app purchases.[12][14][1][16]
Specs
Cassette originalLeft cassette track audio, right track control data; early units three servos, later two (sources disagree on a one-motor stage)[16][18]
2017 digitalLCD/LED eyes, Bluetooth app, USB story files in proprietary SNXROM format; four AA cells (model #17262DS)[14][15][12][11]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Custom stories and eye graphics (2017)Works
SoftwareDifficulty: mediumCase stays closedNo solderingReversible1-3 hr
  • ⚠ Data loss Can erase what is on the device. Back up first.

Plug the 2017 bear into a PC over USB, back up the Books folder, then build new .bin story files with snxrom (audio, mouth cues, optional eye frames).[1][2][3][14]

Good to know

  • Only the three free story slots are replaced this way; stories 4–10 stay paid in-app purchases.[1][14]
  • Audio must be 16-bit WAV at 16 kHz or 32 kHz. Mouth JSON from rhubarb feeds snxrom to build Intro.bin.[1][2]
  • Eye animations average about once every 30 seconds; snxrom can disable them with --no-random-eyes.[1][2][3]
  • Power off with the back switch before reloading files. Back up all contents first.[1][2]

Guides:Teddy Ruxpin Rebuildadafruit/snxrom

Move 2017 guts into another stuffyWorks
Shell reuseDifficulty: mediumOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Transfer the 2017 electronics into a same-size stuffy (e.g. Figment). Cut eye holes to match the LCD panels.[1][17]

Good to know

  • Use a stuffy about the same size as Teddy. Eye holes need only minor cutting.[1][17]

Guides:Teddy Ruxpin Rebuild

WiFi text-to-speech (cassette era)Works
ConnectivityDifficulty: hardOpens caseBasic solderingPermanent3 hr
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Replace the stock brain with a C.H.I.P. board: H-bridge to the three motor connectors, speaker tap, LiPo power, and a web text box on WiFi.[4][5]

Good to know

  • Original board has three motor connectors for jaw, upper jaw, and eyes.[4]
  • Speaker wires splice to a 3.5 mm cable into the C.H.I.P. Power is a 3.7 V LiPo on the board.[4]
  • A custom webpage with a text box drives speech over the local WiFi network.[4][5]

Guides:C.H.I.P.py RuxpinChippyRuxpin

Servo rebuild and voice assistantExperimental
Buttons & inputDifficulty: hardOpens caseBasic solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
  • ⚠ Can brick A mistake can leave the device unable to start.

Gut the original servos, fit micro servos, and drive mouth sync from audio with Arduino or Pi. Alexa / Google Assistant brains are documented only as short summaries.[7][6][8][9][10]

Good to know

  • Builders replace original servos with SG90 micro servos on mouth, eyes, and nose, then sync from audio amplitude.[7][6][8]
  • One build report followed the Tinkernut servo video and used a Raspberry Pi with ServoBlaster instead of Arduino PWM.[6]
  • Do not exceed 5 V on the Arduino analog audio input. An LED without a resistor can destroy the LED and the board.[10]

Guides:No guide found yet.

AA battery replacement (2017)Works
BatteryDifficulty: easyCase stays closedNo solderingReversible5 min

One Phillips #2 screw opens the back cover on model #17262DS; swap four AA cells.[12][13]

Special tools: Phillips #2 screwdriver

Good to know

  • Remove all four AA batteries by pushing the positive end down.[12]

Guides:Teddy Ruxpin Battery Replacement

2017 eye / housing repairWorks
RepairDifficulty: hardOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Cut the head seam, remove housing screws, and desolder the LED eye assemblies. Resew the fur afterward.[11][13]

Special tools: Phillips #1, Phillips #2, soldering iron, desoldering braid

Good to know

  • Eyes are LED and react during story time.[11]
  • Cutting the back seam of the head damages the fur and needs resewing.[11]

⚠ Watch out

  • Be cautious during desoldering and keep track of screws. Do not pull motherboard connector wires out of their plugs.[11][13]

Guides:Teddy Ruxpin Eyes Replacement

Sources (18)

SOURCES.TXT