★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Timex › Timex Datalink

[ device photo ]NEW!

TIMEX · WATCH · 1994

Timex Datalink

Also called: Data Link · Datalink 150 · Datalink 150s · Timex Data Link

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources

Optical-sync wristwatch that reads flashing light from a CRT or Notebook Adapter. Modern work replaces the adapter with Arduino / Pico LED emulators and a Ruby upload client; WristApps can still be assembled for the 150 and 150s.[1][7][8][10]

3MODS
3WORK
0EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Data Link 150Steel bracelet 69737 and related—Metal case. MODE enters COMM MODE for optical sync. Holds about 150 entries. Protocol 3 in the Ruby client.[11][16][1][8]
Data Link 150sSmall size—Same WristApps / Watch Sounds features as the 150. Protocol 4 in the Ruby client.[1][11][8]
Data Link 50 / 70Earlier optical models—Earlier capacity. Software 2.1d lists 70, 150, and 150s. Original water resistance 100 m.[3][11][1]
Specs
LinkReceive-only optical sensor. LCD screens cannot send data; CRT or Notebook Adapter (or emulator) required[1][3][2]
Capacity (150)Up to 150 entries; 31-character messages. 150/150s add WristApps and Watch Sounds[1]
CPU / WristApp RAMMotorola 6805; about 1K user memory for custom apps[15][1]
BatteryAbout 3 years typical use. Data can be lost when the battery runs out. Timex recommends jeweler replacement[1][6][11]
Water resistanceOriginal to 100 m; 150 to 30 m. Pressing buttons underwater voids resistance[1][6]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Notebook Adapter LED emulatorWorks
ConnectivityDifficulty: mediumCase stays closedBasic solderingReversible1-2 hr
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Flash an LED from Teensy LC, Raspberry Pi Pico, or Arduino to replace the original serial Notebook Adapter. Works with vintage Timex software or the modern Ruby client.[7][10][12][13][14][1]

Parts

  • Teensy LC (or Pico) with white/external LED Fits — Onboard LED gives a few inches of range; an external white LED with a resistor gives several feet.[7][14]

Good to know

  • synthead's emulator claims full compatibility with the original Notebook Adapter and Datalink software 2.1d.[7][13]
  • famiclone's Pico/Arduino build works with the original Windows software (winevdm / classic Windows) via DB9 or USB; shield the watch sensor from room light if needed.[10][12]
  • Some TTL serial adapters may need 3 V instead of 5 V.[10]

⚠ Watch out

  • Every send replaces all selected data in the watch. A reset erases all data.[1]

Guides:timex-datalink-arduino Notebook Adapter emulatorDIY_Datalink_Adapter

Modern Ruby upload clientWorks
SoftwareDifficulty: noneCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Write appointments and other data from a modern PC through a Notebook Adapter emulator. Protocol 3 for the 150, protocol 4 for the 150s.[8][3][13]

Good to know

  • The Ruby gem supports every Datalink protocol the author listed, including 150 (protocol 3) and 150s (protocol 4). Needs Ruby 3.1 or newer.[8]
  • Official Timex software 2.1d targets Windows 3.1 through 2000 and does not work with Apple computers or LCD screens without an adapter.[3][13]

Guides:timex_datalink_client Ruby gem

WristApp assemblerWorks
SoftwareDifficulty: hardCase stays closedNo solderingReversible
  • ⚠ Data loss Can erase what is on the device. Back up first.

Build custom 6805 WristApps with John Toebes' assembler in Docker/Wine, then upload the ZAP file. Timex also listed official developer guides behind a license click-through.[9][5][1][4][15]

Good to know

  • The Docker wrapper runs the 1997 Win32 Toebes assembler for the 150 and 150s and outputs a ZAP file for the Ruby client.[9]
  • Timex says WristApp programming needs extensive Motorola 6805 assembly knowledge. An official developer index lists WristApp design guides.[1][5]

Guides:timex-datalink-assembler (Toebes 6805 in Docker)DATA LINK - DEVELOPER RESOURCES

Buttons & modes

BUTTONS.TXT
WhatHow
COMM MODE / optical receiveUse MODE to reach COMM MODE so the watch can receive an optical transfer.[16]

Sources (16)

SOURCES.TXT