★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › NEC › Turbo Express / PC Engine GT (and LT)

[ device photo ]NEW!

NEC · HANDHELD CONSOLE · 1990

Turbo Express / PC Engine GT (and LT)

Also called: TurboExpress · PC Engine GT · HES-EXP-01 · PC Engine LT

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 14 sources · 8 item(s) unverified

1990 NEC handheld sold as PC Engine GT in Japan and TurboExpress in the US (HES-EXP-01). Common work is capacitor service, RGB or composite LCD mods, and printable shells. The PC Engine LT is a different laptop-style machine with its own LCD bias repairs.[5][1][2][6]

7MODS
1WORK
6EXPERIMENTAL
14SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
HES-EXP-01PC Engine GT / TurboExpress handheld1990Handheld form. Japan: PC Engine GT; US: TurboExpress. Same HES-EXP-01 family.[5][3]
PC Engine LTLaptop-style PC Engine with built-in LCD—Not the handheld GT. Laptop form factor, 9 V DC jack, separate LCD bias/backlight circuits. Mods differ from the GT.[6][4]
Specs
Screen (GT / TurboExpress)2.6-inch TFT active-matrix backlit LCD[5]
Power (GT / TurboExpress)6× AA or AC adapter (6 V per Wikipedia; other sources give 7 V or 9 V)[5][8][3]
Battery lifeAbout three hours on 6× AA[5]

Mods (7)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Capacitor replacement (recap)Works
RepairDifficulty: hardOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Ageing or leaking capacitors cause unstable operation and video/audio faults. Shops offer a GT/TurboExpress recap service.[2][5][7][10]

Good to know

  • DragonBox service replaces capacitors in a TurboExpress or PC Engine GT and functionally tests the unit; a kit is included in that service.[2]
  • Ageing or leaking capacitors are a common cause of unstable operation. Recap cannot guarantee repair of unrelated damage.[2]
  • Wikipedia notes sound failure as a frequent TurboExpress problem tied to faulty capacitors.[5]
  • A forum thread: after changing corner caps (three 100 µF and two 33 µF), a later cap change left the speaker silent while headphones still worked — traced to a headphone-jack contact plate.[7] unverified
  • White-screen advice from one thread: recap completely with quality caps before chasing LCD work.[10] unverified

Guides:No guide found yet.

RGB LCD (LCDDRV)Experimental
ScreenDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Replace the OEM LCD with a modern RGB panel using an LCDDRV board fed from the GT's native RGB.[1][13]

Parts

  • LCDDRV screen bracket kit (3.5 inch, Humble Bazooka) Fits with conditions — Holds a 3.5-inch panel and LCDDRV without glue; includes cut template — shell is still cut. Driver board and panel not sold with this listing.[13] Buy: stoneagegamer.com

Good to know

  • 2018 RetroRGB report: first RGB-LCD GT used a hard-to-source LCDDRV board (Japan-only at the time). RGB comes straight from the GT board, called less destructive than composite LCD mods.[1]
  • Bracket kit: adjustable, uses OEM screws, no hot glue; comes with two brackets and a cut template.[13]

Guides:No guide found yet.

Composite LCD / AV boardExperimental
ScreenDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

OSH Park shared board for composite video on TurboExpress/GT. Supports either a screen mod or AV out, not both. Requires lifting and grounding HuC6260 pins.[9]

Good to know

  • Board allows only a screen mod or AV out, not both.[9]
  • Lift and ground pins 19, 25, 29, 32, and 39 on the HuC6260. Uses 2N3904-equivalent SMD transistors.[9]
  • Designer notes the design may contain errors; OSH Park gives no guarantee.[9]

Guides:No guide found yet.

3D-printed replacement shellExperimental
CaseDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Free CAD for a full GT/TurboExpress shell (original screen or 3.5-inch version), battery cover and buttons. CC BY-NC. Files only — no assembly guide.[12]

Parts

  • PC Engine GT/TurboExpress replacement shell (PCBWay share) Fits with conditions — Front shell variants for original or 3.5-inch screen; CC BY-NC.[12]

Good to know

  • Two front shells: original screen and upgraded 3.5-inch screen. Also back shell, battery cover and buttons.[12]

Guides:No guide found yet.

Raspberry Pi in a GT shellExperimental
Shell reuseDifficulty: hardOpens caseBasic solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

A broken TurboExpress shell housing a Raspberry Pi 3B with RetroPie; original controls go to the Pi over USB.[14]

Good to know

  • A Raspberry Pi running RetroPie sits in a GT shell. Original controls link to the Pi over USB through an adapter; the housing gets USB ports.[14]

Guides:No guide found yet.

Cartridge save-RAM boardExperimental
StorageDifficulty: expertCase stays closedFine solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Prototype board on the cartridge connector for 2K/8K/32K save modes. It did not work and the project is shelved; GT and TurboExpress differ in D0–D7 pin order.[11]

Good to know

  • The handheld GT/TurboExpress never had a built-in save option. The author's adapter did not work; project tagged shelved.[11]
  • TurboExpress and PC Engine GT flip pins D0–D7 relative to each other (region lock on the connector).[11]

Guides:No guide found yet.

PC Engine LT LCD bias / recap repairExperimental
RepairDifficulty: expertOpens caseFine solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Stored charge Capacitors keep a dangerous charge after the device is off.

LT-only: laptop-form PC Engine repair — recap plus replacing a destroyed LCD bias inverter transformer with a switching module. Not a GT handheld mod.[6][4]

Good to know

  • LT described as a PC Engine in a laptop form factor. One repair: capacitor failure, electrolyte damage, and a destroyed LCD-bias inverter transformer replaced with a switching module.[6]
  • RetroSix LT index: apply 9 V DC to the left-side DC jack; separate repair pages cover LCD interface, backlight and contrast.[4]

Guides:A New Life For A Rare Console | Hackaday

Sources (14)

SOURCES.TXT