★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000054devices tracked

Home › Devices › Bandai › WonderSwan

[ device photo ]NEW!

BANDAI · HANDHELD CONSOLE · 1999

WonderSwan

Also called: Bandai WonderSwan · monochrome WonderSwan

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 9 sources · 1 item(s) unverified

Bandai's original monochrome handheld from March 1999 (Japan only). One AA cell, a reflective screen with no backlight, and no headphone jack. Documented changes add a backlit IPS panel, a USB-C battery pack, a flashcart for homebrew, new capacitors, and EXT-port headphone or USB adapters.[1][5][6][3][7]

6MODS
2WORK
4EXPERIMENTAL
9SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
WonderSwanOriginal monochrome1999Japan release March 4, 1999. Reflective monochrome screen with no backlight. One AA battery. Not the WonderSwan Color or SwanCrystal.[1]
Specs
Power1× AA; about 40 hours claimed[1]
ScreenReflective monochrome (no backlight)[1][5]

Mods (6)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

IPS backlight screenWorks
ScreenDifficulty: mediumOpens caseBasic solderingPermanent
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Replace the reflective panel with a backlit IPS LCD sized for the original WonderSwan. A touch sensor changes brightness. The kit does not fit Color or SwanCrystal.[5][9]

Parts

  • Hispeedido WonderSwan IPS backlight kit Fits — For the original monochrome WonderSwan only. Includes backlight LCD, PCB, glass lens, tape, wires, and ribbon.[5] Buy: retrogamerepairshop.com

Good to know

  • The backlight LCD only works with the original WonderSwan, not the WonderSwan Color.[5]
  • The kit includes a touch sensor to change brightness, plus glass lens, wires, and a ribbon cable.[5]
  • RetroRGB reviews a backlit replacement screen that is the same size as the original.[9]
  • The original WonderSwan screen runs at 75 Hz; RetroRGB notes that games running at 60 Hz can show too low on the screen with the replacement.[9] unverified

Guides:No guide found yet.

USB-C rechargeable packExperimental
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

A lithium pack with USB-C charging replaces the AA door. It was shaped for WonderSwan Color; on the monochrome shell the curvature does not match perfectly.[6]

Parts

  • RetroOnyx WonderSwan battery pack Fits with conditions — Designed for Color / SwanCrystal curvature. Black-and-white WonderSwan units work with a curvature mismatch.[6] Buy: retroonyx.com

Good to know

  • The pack uses a 2300 mAh lithium cell, USB-C charging, and over/under-voltage protection.[6]
  • Black-and-white WonderSwan units work but with a curvature mismatch versus the Color-shaped pack.[6]

Guides:No guide found yet.

WS Flash MastaWorks
StorageDifficulty: easyCase stays closedNo solderingReversible

A programmable cartridge with micro-USB. It runs homebrew and your own cartridge backups on WonderSwan, WonderSwan Color, and SwanCrystal.[3]

Parts

  • WS Flash Masta USB Fits — Upload files over built-in micro-USB. Multiple slots share one SRAM save area.[3]

Good to know

  • The WS Flash Masta USB uploads files from a computer to the cartridge over built-in micro-USB for play on WonderSwan, WonderSwan Color, or SwanCrystal.[3]
  • The cartridge has multiple slots, but the SRAM save area is shared across slots.[3]

Guides:No guide found yet.

Capacitor replacementExperimental
RepairDifficulty: expertOpens caseFine solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

A surface-mount cap kit covers the monochrome WonderSwan, Color, and SwanCrystal. Flash Masta calls it expert-level soldering.[4][2]

Parts

  • Flash Masta WonderSwan cap kit Fits — Surface-mount caps for WS, WSC, and SwanCrystal.[4] Buy: flashmasta.com

Good to know

  • The kit is for swapping capacitors on WonderSwan Black & White, Color, or SwanCrystal.[4]
  • Flash Masta says the parts are all surface-mount and expert-level soldering.[4]
  • Console5's WonderSwan TechWiki lists classic monochrome capacitor values such as C3 100 µF 4 V.[2]

Guides:No guide found yet.

EXT headphone adapterExperimental
AudioDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

An open-source adapter turns the EXT port into a 3.5 mm headphone jack. The original WonderSwan has no headphone jack of its own.[7]

Good to know

  • zwenergy/wsheadphone is an open headphone adapter for the WonderSwan.[7]

Guides:zwenergy/wsheadphone

EXT-to-USB development adapterExperimental
ConnectivityDifficulty: mediumCase stays closedBasic solderingReversible
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

ws-extfriend is an RP2040-based USB adapter on the WonderSwan EXT port for homebrew development.[8]

Good to know

  • asiekierka/ws-extfriend is a WonderSwan EXT port to USB adapter for homebrew development.[8]

Guides:asiekierka/ws-extfriend

Sources (9)

SOURCES.TXT