★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › Canon › Canon EOS 1100D

[ device photo ]NEW!

CANON · CAMERA · 2011

Canon EOS 1100D

Also called: EOS 1100D · Rebel T3 · Kiss X50 · EOS Rebel T3

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 16 sources

Canon entry-level APS-C Rebel from 2011, also sold as the Rebel T3 and Kiss X50. Magic Lantern has a 1100D.105 port in the main tree. Stock video is 720p; Canon says an external microphone cannot be used.[1][10][4][11][2]

4MODS
4WORK
0EXPERIMENTAL
16SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearFirmwareHow to tell
EOS 1100DAPS-C DSLR (also Rebel T3 / Kiss X50)20111.0.6Sold as EOS 1100D, Rebel T3, and Kiss X50. Same body: front covers interchange. Magic Lantern platform folder is 1100D.105. Canon newest official firmware is 1.0.6.[1][8][10][4][3]
Specs
SensorApprox. 12.20 MP, DIGIC 4[1][10]
Screen2.7-inch LCD, about 230,000 dots[1]
BatteryLP-E10, 7.4 V, 860 mAh; charger LC-E10 / LC-E10E[1]
StorageSD / SDHC / SDXC[1]
Video1280x720 at 30p or 25p, H.264 MOV[1][5]
WeightAbout 450 g body only; about 495 g CIPA[1]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Magic LanternWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Free GPL add-on that runs from the SD card next to Canon firmware. The main tree has a 1100D.105 platform build. Wikipedia lists the 1100D among supported cameras.[11][4][13][14][15][12][6][3][16]

Parts

  • SD or SDHC card, 32 GB or smaller Fits — Used for a first Magic Lantern install. The camera low-level formats it.[13]

Good to know

  • Magic Lantern runs from the card as an add-on over standard Canon firmware. It does not replace firmware in ROM.[14][12]
  • The bootloader uses a bootdisk flag and loads autoexec.bin from the card.[13]
  • Wikipedia lists community ports for the 1100D among Magic Lantern supported cameras.[11]
  • The Magic Lantern source tree includes a platform folder named 1100D.105.[4]
  • Project features include audio controls, zebras, focus peaking, bitrate control, HDR video, and an intervalometer.[15]
  • First install: use a simple SD or SDHC card of 32 GB or smaller and a fully charged original battery. The card is low-level formatted; copy the files and run Canon firmware update.[13]
  • Hold SET at startup to bypass Magic Lantern for one session. Full uninstall runs Firmware Upgrade in-camera to clear the boot flag.[14]
  • For raw video, EOSHD puts the 1100D in the slowest class (older about 20 MB/s SD controller) and does not recommend it for RAW video.[6]

⚠ Watch out

  • The platform folder name is 1100D.105. Canon newest official firmware for this body is 1.0.6. Match the build to the firmware on the camera.[4][3]
  • The project warns that third-party software can damage or destroy the camera. Magic Lantern writes settings to NVRAM that Canon firmware does not always validate.[13][14]
  • After you open the card door, wait for the card LED to finish before removing the card. A bootable card without autoexec.bin can leave the camera unable to boot until you pull the battery.[13]
  • Canon does not cover repairs caused by third-party firmware.[16]

Guides:Magic Lantern INSTALL.txt

Replace the LP-E10 batteryWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

The camera takes a Canon LP-E10 pack (7.4 V, 860 mAh). Charge with the LC-E10 or LC-E10E. The card slot sits beside the battery.[1][7]

Parts

  • Canon LP-E10 Fits — Canon lists the LP-E10 as the rechargeable lithium-ion pack for this body.[1]

Good to know

  • Canon rates the pack at 860 mAh and 7.4 V DC. The LC-E10 / LC-E10E charger takes about two hours at 23 C.[1]
  • CIPA battery life is about 700 shots with the viewfinder and about 220 with Live View.[1]
  • The card slot sits alongside the battery compartment.[7]

Guides:No guide found yet.

Front cover replacementWorks
RepairDifficulty: mediumOpens caseNo solderingReversible15 min
  • ⚠ Stored charge Capacitors keep a dangerous charge after the device is off.

Community iFixit guide: remove the battery door and covers, then swap the front shell. Front covers for the Rebel T3, Kiss X50, and 1100D fit each other.[8]

Special tools: JIS #000 screwdriver, opening picks, spudger, angled tweezers

Good to know

  • Front covers for the Rebel T3, Kiss X50, and 1100D are interchangeable.[8]
  • The guide rates the job moderate and about 15 minutes.[8]
  • Steps include pulling the battery door straight out, removing bottom screws, and unplugging ribbon cables.[8]

⚠ Watch out

  • With the front cover off, the high-voltage capacitor on the DC board is exposed. Discharge it before work.[8]

Guides:Canon EOS Rebel T3 Front Cover Replacement - iFixit

Top cover replacementWorks
RepairDifficulty: hardOpens caseFine solderingReversible20-40 min
  • ⚠ Stored charge Capacitors keep a dangerous charge after the device is off.
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Community iFixit guide through the I/F cover, back cover, and front cover to reach the top assembly. Replacing the top cover or DC board means desoldering four cables to the DC board.[9][8]

Good to know

  • The guide rates the job difficult and about 20 to 40 minutes.[9]
  • Replacing the top cover or the DC PCB needs the four cables from the top cover to the DC board desoldered.[9]
  • The path starts with the I/F terminal cover, then the back-cover ribbons, then the front cover. The microphone cable unplugs from the main board.[9]

⚠ Watch out

  • Opening the body exposes the flash capacitor. Follow the front-cover discharge step before working inside.[8][9]

Guides:Canon EOS Rebel T3 Top Cover Replacement - iFixit

Buttons & modes

BUTTONS.TXT
WhatHow
Bypass Magic Lantern onceHold SET at startup.[14]

Sources (16)

SOURCES.TXT