★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 155 device pages approved★ 1835 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000161devices tracked

Home › Devices › Canon › Canon EOS 50D

[ device photo ]NEW!

CANON · CAMERA · 2008

Canon EOS 50D

Also called: EOS 50D

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 13 sources

Canon's APS-C DSLR from October 2008. Stock firmware locks out video. Magic Lantern unlocks movie recording and raw video from a CompactFlash card on firmware 1.0.9. The body has no onboard sound recording.[3][11][5][7]

2MODS
2WORK
0EXPERIMENTAL
13SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearFirmwareHow to tell
EOS 50DAPS-C DSLR20081.0.9Released October 2008 as the 40D successor. CompactFlash only. Magic Lantern install notes use Canon firmware 1.0.9.[3][4][11][2]
Specs
BatteryBP-511A (also BP-511 / BP-512 / BP-514)[1][4]
StorageCompactFlash Type I/II, UDMA[1]
WeightAbout 730 g body only[1]

Mods (2)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Magic LanternWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Free GPL add-on from the CompactFlash card. On the 50D it unlocks video the stock firmware left off, including raw recording. Install notes require Canon firmware 1.0.9.[9][11][12][10][2][5][6][7][8][3][13]

Parts

  • CompactFlash card, 32 GB or smaller Fits — Required for first install. Larger cards are not for first install.[11][5]

Good to know

  • Magic Lantern runs from the card as an add-on over standard Canon firmware. It does not replace firmware in ROM.[12][10]
  • The 50D install needs Canon firmware 1.0.9. INSTALL.txt lists 50D 1.0.9 among the required stock versions.[11][2]
  • Stock firmware had video capability locked out. Magic Lantern unlocks movie recording, including raw video development from 2013.[7][3]
  • Altcinema's 2014 walkthrough: install the latest stable Magic Lantern first, then the 50D nightly build for raw; copy the nightly onto every CF card used for video.[5]
  • The 50D has no Q button, so the FUNC button does what Magic Lantern calls Q. Live View must be on for movie features because there is no movie mode on the dial.[6]
  • Raw recording needs the raw_rec module enabled. Write speed limits recording; EOSHD put the UDMA 6 CF bus at 133 MB/s with about 65 MB/s write in early tests.[6][8]
  • The body has no built-in sound recording, so an external recorder or mic is needed for audio.[5][3]
  • Hold SET at startup to bypass Magic Lantern for one session. Full uninstall runs Firmware Upgrade in-camera to clear the boot flag.[12]

⚠ Watch out

  • The 50D install requires Canon firmware 1.0.9.[11]
  • Use a fully charged original Canon battery and a CF card of 32 GB or smaller for first install.[11][5]
  • Slow cards drop frames in raw video. Altcinema recommends a fast 1000x-class CF card for raw.[5]
  • The project warns that Magic Lantern can damage or destroy the camera.[11]
  • Canon does not cover repairs caused by third-party firmware.[13]

Guides:Magic Lantern INSTALL.txtDIY filmmaking and the Canon 50DMagic Lantern Setup, Settings, and Shooting Raw HD on the 50D

Replace the BP-511A batteryWorks
BatteryDifficulty: easyCase stays closedNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

The camera takes a Canon BP-511A pack. iFixit also lists BP-511, BP-512, and BP-514 as compatible. A BG-E2N or BG-E2 grip can take AA cells.[1][4]

Parts

  • Canon BP-511A Fits — Canon supplies the BP-511A as the standard pack.[1]
  • Battery Grip BG-E2N or BG-E2 Fits — Lets size AA batteries be used.[1]

Good to know

  • Canon lists Battery Pack BP-511A, quantity 1.[1]
  • iFixit lists compatible packs BP-511/BP-511A or BP-512/BP-514, with BP-511A supplied.[4]
  • With Battery Grip BG-E2N or BG-E2 attached, size AA batteries can be used.[1]

Guides:No guide found yet.

Buttons & modes

BUTTONS.TXT
WhatHow
Bypass Magic Lantern onceHold SET at startup.[12]
Magic Lantern Q equivalentPress FUNC. The 50D has no Q button.[6]

Sources (13)

SOURCES.TXT