Home › Devices › Canon › Canon EOS 6D Mark II
CANON · CAMERA · 2017
Canon EOS 6D Mark II
Also called: EOS 6D Mark II · 6D2 · 6D II
Canon's full-frame DIGIC 7 DSLR from 2017, the first with a vari-angle LCD. A Magic Lantern 6D2.111 platform folder exists, but the project's README says the code has never been tested on a real camera. A community iFixit guide covers the DC/DC power board.[1][4][11][9]
Which one do I have?
Specs
Mods (3)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Magic LanternExperimental
- ⚠ Can brick A mistake can leave the device unable to start.
- ⚠ Data loss Can erase what is on the device. Back up first.
2025 news lists the 6D Mark II among revived DIGIC 7 ports with utility features. The official 6D2.111 platform README says the code has never been tested on a real camera and to ask an expert first.[11][12][4][5][14][15][13][2][16]
Parts
- SD or SDHC card, 32 GB or smaller Fits — Used for a first Magic Lantern install on supported bodies.[14]
Good to know
- Magic Lantern runs from the card as an add-on over standard Canon firmware. It does not replace firmware in ROM.[15][13]
- CineD and No Film School list the 6D Mark II among 2025 newly supported cameras with utility features such as intervalometer, custom crop marks, shutter count, and 30-minute Live View powersave disable.[11][12]
- The platform folder 6D2.111 exists in the main tree, separate from 6D.116 and from M6II.111.[4][5]
- The 6D2.111 README says the code has never been tested on a real camera, boots only partly in QEMU, and users should ask an expert first.[4]
- Canon's newest firmware is 1.2.0. The platform folder name suggests a 1.1.1 target.[2][4]
⚠ Watch out
Guides:No guide found yet.
Replace the LP-E6N batteryWorks
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
The 6D Mark II uses the Canon LP-E6N pack (1865 mAh versus 1800 mAh for the older LP-E6).[8]
Parts
- Canon LP-E6N Fits — Power source listed for the 6D Mark II among other LP-E6N bodies.[8]
Good to know
- The LP-E6N is listed as the power source for the 6D Mark II. Capacity is 1865 mAh versus 1800 mAh for the LP-E6.[8]
Guides:No guide found yet.
DC/DC power board replacementWorks
- ⚠ Stored charge Capacitors keep a dangerous charge after the device is off.
Community iFixit guide (not staff): open grips and covers to reach the DC/DC board. About 20 minutes to 1 hour, moderate.[9]
Special tools: magnetic screw organizer, Phillips #00 screwdriver, plastic pry tool
Good to know
- Community-written guide, not created by iFixit staff. Time 20 minutes to 1 hour, difficulty Moderate.[9]
- Steps cover grips, I/O bezel, battery cover, screws, back cover, front cover and top cover cables.[9]
⚠ Watch out
- Remove the SD card first, or the card or main board can break.[9]
Buttons & modes
| What | How |
|---|---|
| Bypass Magic Lantern once | Hold SET at startup.[15] |
Sources (16)
- official EOS 6D Mark II - Canon Camera Museum · 2026-11-16
- official EOS 6D Mark II Firmware Update, Version 1.2.0 · 2026-11-16
- official Compatible Cards (EOS 6D Mark II) · 2026-11-16
- official magiclantern_simplified platform/6D2.111 · 2026-11-16
- official magiclantern_simplified/platform at dev · 2026-11-16
- docs Canon EOS 6D Mark II Specifications · 2026-11-16
- blog Canon 6D Mark II Review · 2026-11-16
- blog Canon LP-E6N Battery · 2026-11-16
- docs Canon EOS 6D Mark II DC/DC Power Board Replacement · 2026-11-16
- docs Canon EOS 6D Mark II Repair Help · 2026-11-16
- news Magic Lantern is Back and Supports New Cameras · 2026-11-15
- news Magic Lantern is Back With New Support for Four Canon Cameras · 2026-11-15
- official magiclantern_simplified - reticulatedpines · 2026-11-15
- official Magic Lantern INSTALL.txt · 2026-11-15
- official Magic Lantern FAQ.txt · 2026-11-15
- blog Will Custom Firmware Void My Warranty? · 2026-11-15