Home › Devices › Nintendo › Game Boy Advance
NEW!Photo: Joonas Javanainen (gekkio), CC BY 4.0 · AI-edited (studio background)
NINTENDO · HANDHELD CONSOLE · 2001
Game Boy Advance
Also called: GBA · AGB-001 · original Game Boy Advance
The wide original Game Boy Advance, model AGB-001, from 2001. It runs about 15 hours on two AA batteries. Common mods fit an IPS screen (a no-cut kit, or a kit that trims the shell), an SP backlit screen, a rechargeable cell, or a new shell.[1][2][7][4][9][3]
Which one do I have?
| Model | Variant | Year | How to tell |
|---|---|---|---|
| AGB-001 | Original Game Boy Advance | 2001 | Model number AGB-001. This is the wide original, not the clamshell SP.[1] |
Mods (9)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
No-cut IPS screenWorks
A drop-in IPS kit that leaves the original shell uncut and needs no solder. It has brightness control. You still open the case to fit the screen.[7]
Good to know
- The kit needs no change to the original case and is plug-and-play.[7]
- The kit has brightness control.[7]
⚠ Watch out
- The screen does not seem to be as bright as other options.[7]
Guides:No-cut, no-solder GBA backlit IPS screen mod – RetroRGB
IPS screen with a shell trimWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
An IPS kit for the original shell. Trim the plastic around the screen, or use a pre-trimmed shell. On a 32-pin board, fold the ribbon adapter. Brightness is three wires.[2][6][8]
Parts
- FunnyPlaying 3.0 inch laminated IPS kit Fits with conditions — Only works with a laminated housing. At the lowest brightness the kit draws about 0.14 W.[6] Buy: funnyplaying.com
Good to know
- 32-pin boards need the ribbon adapter folded. Skip that step on a 40-pin board.[2]
- Hold Select and press L to dim the screen. Hold Select and press R to brighten it. That control uses three wires soldered to TP2 (Select), L, and R.[2]
- The laminated FunnyPlaying kit bonds the glass to the panel. Its on-screen menu keeps settings after power-off, and includes palettes, frame blending, and a pixel grid.[6]
- Early IPS kits look different from an AGS-101 screen.[8]
⚠ Watch out
- Trim the shell around the LCD, or start with a shell that is already trimmed.[2]
Guides:Game Boy Advance IPS Backlight mod - iFixit Repair Guide
SP backlit screenWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Fit an AGS-101 screen from a Game Boy Advance SP into the original Advance. The adapter has to match the board, and the shell plastic is cut for the thicker panel.[4]
Good to know
- The install uses an adapter that matches the motherboard type (32-pin or 40-pin).[4]
- Internal shell plastic is trimmed so the thicker backlit panel fits.[4]
Guides:Gameboy Advance AGS-101 Blacklight Mod - iFixit Repair Guide
Rechargeable LiPo packExperimental
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
A drop-in LiPo adapter for a 1200 mAh cell, with no shell cutting. It uses a TP4056 USB charge module, Micro-USB or USB-C.[9]
Parts
- AGB LiPo adapter Fits — Made for a 103040 1200 mAh LiPo and a TP4056 charge board. No shell cutting.[9]
Good to know
- The adapter is meant to add a rechargeable cell without a permanent change to the console.[9]
Guides:No guide found yet.
New shellWorks
Move the board into a new housing. The job swaps the front and back shells, the buttons, the rubber pads, and the screen lens.[3]
Special tools: tri-point Y0 screwdriver
Good to know
- The back shell is seven screws. The motherboard is three more. A tri-point Y0 driver and a JIS driver are used.[3]
Guides:How to Reshell Your Game Boy Advance - iFixit Repair Guide
Laminated 720×480 screenExperimental
A pre-laminated IPS kit at 720×480, with integer scaling of nine new pixels per original pixel, an on-screen menu, and touch shortcuts that can be turned off.[5]
Parts
- Hispeedido V5 pre-laminated IPS kit Fits — Pre-laminated lens, 720×480, with an on-screen menu. Touch shortcuts can be turned off.[5] Buy: hispeedido.com
Good to know
- The panel is 720×480 with integer scaling, nine new pixels for each original pixel. The menu includes desaturation and frame blending that can be turned off.[5]
Guides:No guide found yet.
Clicky buttonsExperimental
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
A flex board that replaces the rubber pads with tactile switches, like the SP. It is soldered to the button test pads.[10]
Parts
- AGB tact flex board Fits — Soldered to the button test pads. Takes ALPS or XKB switches, with a 3D-printed D-pad spacer.[10]
Good to know
- The board converts the membrane buttons to clicky tact switches.[10]
Guides:No guide found yet.
MIDI linkWorks
An Arduino on the link port talks to a sequencer or DAW. It can take power from the link port. The case stays closed.[12]
Good to know
- ArduinoBoy was tested on the Game Boy Advance and Advance SP, the original Game Boy, and the Game Boy Color.[12]
- It plugs into the link port and can be powered from that port.[12]
Guides:No guide found yet.
Replacement motherboardExperimental
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
An open recreation of the Advance board with a cleaner audio circuit. One variant keeps AA batteries. One uses a lithium-ion cell.[11]
Good to know
- The project is a new motherboard for the original Advance, with a cleaner audio circuit.[11]
- Board variants support either the stock AA batteries or a built-in lithium-ion cell.[11]
Guides:No guide found yet.
Sources (14)
- wiki Game Boy Advance Repair Help: Learn How to Fix It Yourself - iFixit · 2026-11-14
- wiki Game Boy Advance IPS Backlight mod - iFixit Repair Guide · 2026-11-14
- docs How to Reshell Your Game Boy Advance - iFixit Repair Guide · 2026-11-15
- docs Gameboy Advance AGS-101 Blacklight Mod - iFixit Repair Guide · 2026-11-15
- shop Retro Game Accessories, Console Spares & Mod Kits – Hispeedido · 2026-11-14
- shop 3.0 Inch IPS AGB Laminated Kit – FunnyPlaying · 2026-11-15
- blog No-cut, no-solder GBA backlit IPS screen mod – RetroRGB · 2026-11-15
- blog New GBA IPS Screen Comparison – RetroRGB · 2026-11-15
- docs GitHub - makhowastaken/AGB_LIPO: A cheap, DIY style LiPo adapter for AGB without having to mod the console · GitHub · 2026-11-15
- docs GitHub - makhowastaken/AGB_TACT: Tact switch mod for the Game Boy Advance (clicky buttons like the GBA SP but for regular GBA) · GitHub · 2026-11-15
- docs GitHub - MouseBiteLabs/Game-Boy-Enhance: A recreation of the original Game Boy Advance, with some modern upgrades including crystal clear audio · GitHub · 2026-11-15
- docs GitHub - trash80/Arduinoboy: Official ArduinoBoy Repository for serial MIDI communication to the Nintendo Gameboy. · GitHub · 2026-11-15
- shop GBA ITA TFT backlight kit – FunnyPlaying · 2026-11-14
- shop CleanJuice Game Boy Advance Rechargeable Battery Pack | RetroSix - Hand Held Legend · 2026-11-14