★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 231 device pages approved★ 2829 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000237devices tracked

Home › Devices › SNK › Neo Geo Pocket (mono)

Neo Geo Pocket (mono)NEW!

Photo: Evan-Amos, Public domain · AI-edited (studio background)

SNK · HANDHELD CONSOLE · 1998

Neo Geo Pocket (mono)

Also called: NGP · Neo Geo Pocket Classic · SNK Neo Geo Pocket

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 9 sources · 5 item(s) unverified

Japan/Hong Kong monochrome Neo Geo Pocket (eight greys, two AA cells). The common screen work is a Hand Held Legend Game Boy backlight (documented install) or a frontlight; shops also sell a Hispeedido mono IPS kit and a recap/speaker kit. The IPS kits are sold separately for the mono NGP and the NGPC, so pick the one for your console.[8][1][2][6][9]

4MODS
3WORK
1EXPERIMENTAL
9SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Neo Geo PocketMonochrome (Classic)1998First NGP: reflective grey LCD, not the Neo Geo Pocket Color. Japan/Hong Kong release.[8]
Specs
ScreenReflective monochrome LCD, eight shades of grey[8]
PowerTwo AA cells, about 20 hours; CR2032 for saves and clock[8]
ReleaseOctober 1998, primarily Japan and Hong Kong; never officially North America or Europe[8]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Game Boy backlight (Hand Held Legend)Works
ScreenDifficulty: hardOpens caseBasic solderingPermanent1-2 hr
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Fit an HHL DMG/Pocket V3 backlight behind the mono LCD after removing the polarising foil. About 1–2 hours; case notches and post trimming required.[1][2][4][5][3]

Special tools: Tri-wing screwdriver, scalpel

Parts

  • Hand Held Legend Game Boy Backlight V3 (DMG/Pocket) Fits with conditions — Vendor says DMG and Pocket backlights can backlight a Neo Geo Pocket. Soldering required. Run from a 5 V source; no alcohol on the panel.[2][4][5][1] Buy: handheldlegend.com

Good to know

  • Hand Held Legend says its Game Boy DMG and Pocket backlights can be used to backlight a Neo Geo Pocket.[2]
  • A 2018 install: five Phillips and one Tri-Wing screw, ZIF screen ribbon, desolder speaker wires, remove polarising foil so the LCD is see-through, test-fit film between LCD and backlight, wire to the board, cut case notches and trim top posts.[1]
  • The LCD is glued and can crack; dry-run before final fit and clean dust carefully.[1][5]
  • Vendor docs: do not use alcohol on the backlight; install at a 5 V source for brightness and to avoid audio-board interference; resistors are built into non-RGB V3 panels.[5]

⚠ Watch out

  • Installed backlight kits are not eligible for replacement or return.[3][5]

Guides:Adding a Back Light to a Neo Geo Pocket (not Color)V3 Backlight and Bivert

Neo Geo Pocket frontlightWorks
ScreenDifficulty: hardOpens caseNo solderingPermanent1-2 hr
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

HHL frontlight for NGP or NGPC, installed like Game Boy Color/Advance frontlights. Needs LOCA optical adhesive.[3]

Parts

  • Hand Held Legend Neo Geo Pocket Frontlight Fits — Fits mono NGP or Color. LOCA required. Dry-run before install; LCD may break under pressure.[3] Buy: handheldlegend.com

Good to know

  • Installed very similarly to the Game Boy Color/Advance frontlights; LOCA is required.[3]
  • Do a dry run before installation; the LCD may break under pressure.[3]

Guides:No guide found yet.

Hispeedido Super OSD IPS kit (mono)Experimental
ScreenDifficulty: hardOpens caseBasic solderingPermanent1-3 hr
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Full backlit IPS LCD replacement sold for the monochrome NGP (HS-IPS-NGP) with OSD touch controls. NGPC color IPS kits are a separate product.[6][9]

Parts

  • Hispeedido Super OSD IPS kit (HS-IPS-NGP) Fits with conditions — Seller claims 5% more screen area, minor soldering, touch sensors for palette/brightness/OSD. Separate kits are sold for NGPC Fat/Slim; pick the kit for your console.[6] Buy: k-retro.com

Good to know

  • K-Retro sells a Hispeedido Super OSD IPS kit specifically for the monochrome NGP (and separate kits for NGPC Fat and Slim).[6] unverified
  • RetroRGB's IPS write-up covers Neo Geo Pocket Color kits (larger viewable area, custom lens) — not the monochrome console.[9]

Guides:No guide found yet.

Capacitor recap and louder speakerWorks
RepairDifficulty: mediumOpens caseBasic solderingReversible1-2 hr
  • ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.

Replace the electrolytic capacitors, power LED, and speaker. Soldering required; seller says the included speaker is louder than stock.[7]

Parts

  • K-Retro NGP mono capacitor and speaker kit Fits — Includes electrolytics (4×100 µF 4 V, 1×470 µF 6.3 V), LED, and speaker.[7] Buy: k-retro.com

Good to know

  • The kit includes all electrolytic capacitors, a new speaker, and a power LED; soldering is required.[7]
  • The seller says the included speaker is louder than the original (demo video is for NGPC).[7] unverified

Guides:No guide found yet.

Sources (9)

SOURCES.TXT