★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000054devices tracked

Home › Devices › Nintendo › Nintendo Switch Lite

[ device photo ]NEW!

NINTENDO · HANDHELD CONSOLE · 2019

Nintendo Switch Lite

Also called: Switch Lite · HDH-001

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 9 sources · 1 item(s) unverified

Nintendo's handheld-only Switch (HDH-001, September 2019). Controls are built in and there is no dock video out. Documented mods add an OLED panel and HDMI out; battery and stick repairs are on iFixit.[1][2][3][6][7]

4MODS
4WORK
0EXPERIMENTAL
9SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
HDH-001Switch Lite2019Handheld only. Controls do not detach, and there is no kickstand. September 2019.[1][5] unverified
Specs
Screen5.5-inch LCD, 1280×720[9][5]
Battery13.6 Wh lithium-ion[5]
ControlsIntegrated; left side has a traditional D-pad[1][9]

Mods (4)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

SUPER5 OLED screenWorks
ScreenDifficulty: hardOpens caseNo solderingPermanent
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

Retro Remake's SUPER5 OLED Touch kit adds an OLED display and glass touchscreen to the Lite. A later kit combines OLED with HDMI out. iFixit's screen guide shows the stock-screen teardown: battery disconnected, display adhesive heated and sliced.[2][3][4][8]

Parts

  • SUPER5 OLED kit (Retro Remake) Fits — Aftermarket OLED kit for the Lite.[2][4]

Good to know

  • Retro Remake offered a SUPER5 OLED Touch mod that replaces the factory LCD, and later a combined OLED + HDMI kit.[2][3]
  • iFixit's stock-screen replacement removes the back panel, disconnects the battery, and heats and slices the display adhesive.[8]

Guides:Nintendo Switch Lite Screen Replacement - iFixit

HDMI outWorks
ConnectivityDifficulty: hardOpens caseNo solderingPermanent
  • ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.

An internal HDMI port added inside the original shell lets the Lite drive a TV or monitor. Coverage describes the kit as no-solder.[2][3]

Parts

  • SUPER5 HDMI / video-out kit Fits — Adds a micro HDMI port inside the original shell.[2][3]

Good to know

  • The mod adds HDMI output (up to 1080p) to the Lite without a Switch dock.[2]
  • In the demo, video and audio switch to HDMI when a cable is plugged in and back to the built-in screen and speakers when it is unplugged.[3]
  • The build is described as solderless, using internal cable routing, and aimed at experienced modders.[3][2]

Guides:No guide found yet.

Analog stick replacementWorks
RepairDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Replace a drifting left stick. The stick connects to the left daughterboard by a ribbon cable and is held by two screws. iFixit lists OEM and aftermarket (TMR) replacement sticks.[7]

Good to know

  • iFixit's guide replaces the left joystick to address stick drift. The stick is held by two screws and plugs into the left daughterboard by a ribbon cable; the guide needs no soldering.[7]
  • iFixit lists both a standard replacement stick and a Gulikit TMR stick for this guide.[7]

Guides:Nintendo Switch Lite Left Joystick Replacement - iFixit

Replace the Lite batteryWorks
BatteryDifficulty: mediumOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the internal 13.6 Wh pack. Discharge below 25% first. Needs Tri-point Y00 and Phillips/JIS #00; soften adhesive with isopropyl alcohol.[6][5]

Special tools: Tri-point Y00, JIS/Phillips #00, isopropyl alcohol

Good to know

  • The teardown lists a 13.6 Wh lithium-ion pack that is strongly glued down.[5][6]
  • Discharge below 25% before opening. Soften adhesive carefully; do not puncture the cell.[6]

Guides:Nintendo Switch Lite Battery Replacement - iFixit

Sources (9)

SOURCES.TXT