Home › Devices › Psion › Psion netBook
PSION · LAPTOP · 1999-2003
Psion netBook
Also called: netBook · Psion netBook Pro · NetBook Pro
A clamshell Psion for mobile work. The 1999 netBook runs EPOC. The 2003 netBook Pro runs Windows CE. Both have Linux installs from a CompactFlash card, and the original pack can be rebuilt with 18650 cells.[3][1][6][12][10]
Which one do I have?
| Model | Variant | Year | Firmware | How to tell |
|---|---|---|---|---|
| netBook | Original, EPOC | 1999 | EPOC ER5 | 1999 clamshell with a VGA touchscreen, a 190 MHz StrongARM, and EPOC ER5 running from RAM.[3] |
| netBook Pro | Windows CE | 2003 | Windows CE .NET 4.2 | Announced in October 2003. SVGA touchscreen, 400 MHz XScale, 128 MB RAM, and Windows CE .NET 4.2.[1][3] |
Specs
| Original CPU | StrongARM SA-1100, 190 MHz[1][2] |
| Original memory | 32 MB RAM, plus room for one extra 32 MB chip[1] |
| Original screen | VGA colour touchscreen[1] |
| Pro CPU | Intel XScale PXA255, 400 MHz[1][4] |
| Pro memory | 128 MB RAM, 32 MB ROM[1][4] |
| Pro screen | 800×600 SVGA TFT, CCFL backlight, touch[1][4] |
| Battery life | Removable Li-ion, about 8 to 10 hours[1] |
| Pack cells | Three 1500 mAh cells in the netBook and Series 7 pack; charger stops at 12.6 V[10] |
| Listed pack | 12.6 V, 2200 mAh Li-ion, plus two AAA backup cells[2] |
| Pro cards and audio | CompactFlash, PC Card, SD/MMC; 58-key keyboard; 2.5 mm headphone and mic socket[2] |
Mods (5)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Linux on the netBook ProExperimental
- ⚠ Data loss Can erase what is on the device. Back up first.
Boot Linux from a CompactFlash card. Windows CE stays on the machine. Pull the card and hard-reset to get Windows CE back.[12][1][3]
Special tools: paperclip
Good to know
- The card needs a FAT16 partition and an EXT2 partition. A hard reset, then Ctrl, D, and Esc together, boots Linux from the card.[12] unverified
- Windows CE is still there. Remove the CompactFlash card and hard-reset to boot Windows CE again.[12] unverified
⚠ Watch out
- The first boot can sit still for a long time. Wait it out.[12] unverified
Linux on the original netBookExperimental
- ⚠ Data loss Can erase what is on the device. Back up first.
OpenPsion boots Linux from CompactFlash on the 1999 netBook. In 2006 the port was still alpha: the screen and X worked, and power, sound, and much of the touchscreen did not.[5][6][7][8][9][11]
Parts
- Netgear MA401 wireless PC Card Fits with conditions — Listed as working in a 2005 16-bit PCMCIA list for the original netBook. That list is incomplete.[11]
Good to know
- OpenPsion calls Linux on the Series 7 and netBook more or less working, and still alpha.[5]
- As of the 2006 HOWTO, the framebuffer and X work. CompactFlash, PCMCIA, and the touchscreen are only rudimentary. There is no sound and no power management, so you cannot turn it off.[6]
- There is no way to read the battery level, and no way to turn the machine off.[7]
- The kernel port named in the HOWTO is Linux 2.4.26 for the netBook and Series 7. Linux experience is required.[7]
- A CompactFlash card uses a small FAT16 partition and a larger ext2 or ext3 partition. Linux cannot live on the FAT partition EPOC uses. Microdrives of 4 GB or larger are supported.[8]
- Bookboot builds an OS.img under 16 MB that boots Linux directly, skipping ArLo and EPOC. Some kernels have a display problem on that path.[9]
- PCMCIA on this CPU is 16-bit only. A 2005 list marks a Netgear MA401 wireless card as working, and says the list is incomplete.[11] unverified
⚠ Watch out
Guides:Linux on the Psion netBook HOWTOInstallation to CompactFlash — netBook HOWTOUsing Bookboot — the Linux OS.img
Rebuild the battery with 18650 cellsExperimental
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
The removable pack is three 18650 Li-ion cells. A higher-capacity set still charges to 12.6 V. One rebuild ran longer on a Series 7, and a solder slip in it damaged the pack controller.[10]
Special tools: soldering iron, multimeter
Parts
- Three 18650 Li-ion cells Fits with conditions — Stock netBook and Series 7 cells are 1500 mAh. 2200 mAh cells still charge to 12.6 V and take longer to fill.[10]
Good to know
- The charger watches the real pack voltage and stops at 12.6 V. It is not locked to 1500 mAh cells.[10] unverified
- A 2200 mAh rebuild ran about 12.5 hours on a Series 7, against about 7 hours on the old pack.[10] unverified
- The same write-up guesses that the netBook Pro pack differs only in the cells' mAh rating.[10] unverified
⚠ Watch out
- Lithium-ion cells are dangerous. A solder spike in one rebuild shorted a cell and damaged the pack controller, and the pack was no longer recognised.[10] unverified
Extra 32 MB RAM chipExperimental
Symbian OS 6 on the original netBookNot possible
Buttons & modes
| What | How |
|---|---|
| Hard reset (netBook Pro) | Press the switch in the hole just under the Enter key with a paperclip. To boot Linux from the prepared CompactFlash card, hold Ctrl, D, and Esc immediately after the reset.[12] |
Sources (12)
- wiki Psion netBook · 2026-11-17
- wiki Psion netbook — MobileRead Wiki · 2026-11-17
- docs Psion netBook — Centre for Computing History · 2026-11-17
- docs Psion Teklogix Netbook Pro specifications · 2026-11-17
- official OpenPsion — Linux for Psion computers · 2026-11-17
- official Linux on the Psion netBook HOWTO · 2026-11-17
- official Introduction — Linux on the Psion netBook HOWTO · 2026-11-17
- official Installation to CompactFlash — netBook HOWTO · 2026-11-17
- official Using Bookboot — the Linux OS.img · 2026-11-17
- official Rebuilding a netBook's lithium-ion battery · 2026-11-17
- official netBook supported PCMCIA hardware · 2026-11-17
- blog How to install Linux on the Psion Netbook Pro · 2026-11-17