★ 170 device pages approved★ 2048 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 170 device pages approved★ 2048 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000176devices tracked

Home › Devices › SanDisk › SanDisk Sansa Fuze+

[ device photo ]CUSTOM FW!

SANDISK · MUSIC PLAYER · 2010

SanDisk Sansa Fuze+

Also called: Sansa Fuze+ · Fuze Plus · Sansa Fuze Plus · AMS Fuze+

✔ APPROVEDChecked fact by fact · last checked 2026-11-17 · 8 sources · 1 item(s) unverified

2010 touchpad Sansa with microSDHC expansion and Micro-USB. Rockbox has a stable Fuze+ port; install patches the stock firmware bootloader. Aftermarket battery packs are sold. Clip, Clip+, e200, and Fuze v1/v2 have their own pages.[1][7][3]

2MODS
1WORK
1EXPERIMENTAL
8SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
Sansa Fuze+4 / 8 / 16 GB2010Successor to the Sansa Fuze. Touchpad instead of a scroll wheel, 2.4-inch QVGA screen, Micro-USB. Rockbox lists a stable Fuze+ target.[1][2][7]
Specs
Screen2.4-inch QVGA LCD[1]
Storage4 / 8 / 16 GB internal flash plus microSDHC up to 32 GB[1]
PortsMicro-USB type B for data and charging; touchpad input (no click wheel)[1]
Radio / micFM radio with RDS; built-in microphone[1]

Mods (2)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Rockbox custom firmwareWorks
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

Stable Rockbox port for the Fuze+. Rockbox Utility patches the stock firmware with an alternate bootloader; hold volume-down at power-on for stock dual-boot.[7][1][3][4][8]

Good to know

  • Rockbox lists Sansa Fuze+ in its stable targets table.[7]
  • The Fuze+ has its own stable Rockbox port.[1]
  • A 2012 SanDisk Forums walkthrough: remove the microSD card, connect by Micro-USB, patch the stock firmware file with the alternate bootloader, then copy Rockbox files into a .rockbox folder.[3]
  • Hold volume-down at power-on to boot stock firmware. Uninstall by copying the unpatched firmware file back to the root.[3]
  • A 2014 forum user reported Rockbox ran well on the Fuze+, with the stock touchpad still a weak point.[4]
  • Rockbox is free open-source replacement firmware for supported digital audio players.[8]

⚠ Watch out

  • Installing modified firmware can make the player unusable. Keep a copy of the stock firmware file.[3]

Guides:Install and uninstall Rockbox on Sansa Fuze+ - SanDisk Forums

Replacement batteryExperimental
BatteryDifficulty: hardOpens caseNo solderingReversible
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Aftermarket Li-polymer packs are sold for the Fuze+ (OEM part P50206).[6][5]

Parts

  • BatteryWeb JNC SSF-H5 / P50206 (3.7 V 950 mAh Li-polymer) Fits with conditions — Listed for Fuze+ with a two-pin JST connector. Seller bench-test claim is unverified.[6] Buy: batteryweb.com

Good to know

  • BatteryWeb lists a 3.7 V 950 mAh Li-polymer pack that replaces OEM part P50206 on the Fuze+.[6]

⚠ Watch out

  • The iFixit Sansa Fuze teardown does not mention the Fuze+, so its steps may not match. Do not treat it as a Fuze+ guide.[6][5]

Guides:No guide found yet.

Sources (8)

SOURCES.TXT