Home › Devices › Texas Instruments › TI-83 Plus
TEXAS INSTRUMENTS · CALCULATOR
TI-83 Plus
Also called: TI-83+ · 83 Plus · TI-83 Plus Silver Edition · TI-83+ SE
Z80 graphing calculator with flash apps and four AAA cells plus a CR1616 backup. Common work is shell apps (Doors CS, MirageOS), KnightOS as a full OS swap, battery and key repairs, and LED or EL backlights.[1][3][15][12][17]
Which one do I have?
| Model | Variant | Year | How to tell |
|---|---|---|---|
| TI-83PLUS | TI-83 Plus (base) | — | Printed as TI-83 Plus. Four AAA + backup cell. Assembly programs written for the original TI-83 will not run without modification.[1][3] unverified |
| TI-83PLUS-SE | TI-83 Plus Silver Edition | — | Printed as TI-83 Plus Silver Edition. 15 MHz Z80, 128 KB RAM (24 KB user), 1.5 MB flash. Discontinued in favour of the TI-84 Plus line. KnightOS also supports it.[4][14] unverified |
Specs
Mods (10)
⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes
Replace backup battery (CR1616)Works
- ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.
- ⚠ Data loss Can erase what is on the device. Back up first.
Swap the coin cell that keeps RAM alive when the AAA pack is out. About five minutes; do not remove AAA and lithium together.[5][2][1]
Parts
- CR1616 lithium coin cell Fits — Spring-loaded; can pop out when pried. Per TI, replace all four AAA cells together, or replace only the lithium cell.[5][2]
Good to know
- The backup battery powers the calculator so information is not lost when the AAA cells are removed.[5][1]
- TI says replace all four AAA (or AA) at once, or replace only the lithium cell — removing both types at once can erase memory.[2]
- Steps: remove AAA cells, unscrew one 5 mm Phillips cover, pry out the spring-loaded CR1616 with a plastic tool.[5]
Doors CS shellWorks
- ⚠ Check the law May break a law or rule where you live.
- ⚠ Data loss Can erase what is on the device. Back up first.
Install Doors CS for a desktop GUI that runs BASIC, ASM, MirageOS, Ion, and nostub programs with nested folders.[15]
Good to know
- Doors CS 7.4 is a shell and GUI for TI graphing calculators that runs BASIC, ASM, MirageOS, Ion, and nostub programs with nested folders.[15]
- It includes a CALCnet networking library for communication and multiplayer gaming.[15]
Guides:No guide found yet.
MirageOS flash shellWorks
- ⚠ Check the law May break a law or rule where you live.
- ⚠ Data loss Can erase what is on the device. Back up first.
Flash Application shell for the TI-83 Plus with built-in features for users and assembly programmers.[16]
Good to know
- MirageOS is a Flash Application shell for the TI-83 Plus with many built-in features for users and assembly programmers.[16]
Guides:No guide found yet.
KnightOS custom OSWorks
- ⚠ Can brick A mistake can leave the device unable to start.
- ⚠ Data loss Can erase what is on the device. Back up first.
- ⚠ Check the law May break a law or rule where you live.
Replace TI-OS with open-source KnightOS (with a package manager). Erases RAM and the TI-OS archive; no real graphing math in KnightOS.[12][14][13]
Good to know
- KnightOS is a third-party open-source OS for TI calculators; it officially supports the TI-83 Plus and TI-83 Plus Silver Edition (also TI-73 / TI-84 Plus / SE).[14][13]
- Installing KnightOS erases RAM and the TI-OS Archive.[12]
- KnightOS has no math or graphing support past a simple four-operation calculator.[12]
- Install path: check boot code, remove a battery, hold DEL, send the OS upgrade with TI-Connect or TiLP. Boot code 1.03 and newer block unsigned OS installs — workarounds are on the download page.[12]
- TI-OS can be reinstalled from TI's own download.[12]
Guides:Download · KnightOS
Keyboard mat or key replacementWorks
Clean or replace the rubber contact mat when keys feel dead; swap individual cracked keys with tweezers after a full teardown.[10][11]
Special tools: T6 screwdriver, tweezers
Good to know
- The keyboard mat makes contact with the motherboard; if keys work poorly, clean the contacts or replace the mat.[10]
- Single cracked keys are removed with tweezers one at a time after the case is open.[11]
Guides:TI-83 Plus Keyboard Mat ReplacementTI-83 Plus Individual Keys Replacement
Back case replacementWorks
Reflow glitchy LCD ribbonsWorks
Missing lines on the display are often fixed by gently heating and pressing the ribbon cables with a low heat gun.[8]
Special tools: heat gun (lowest setting)
Good to know
Screen and motherboard replacementWorks
The LCD is tethered to the motherboard, so both must be replaced together. Keep the face plate face-down so keys do not fall out.[7]
Good to know
Link (I/O) port replacementWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
Replace a broken 2.5 mm link jack with a genuine SMD port or a generic 3-pole jack and jumper resistors.[9]
Good to know
LED or EL backlightWorks
- ⚠ Soldering Needs a soldering iron. Heat can lift pads and burn skin.
- ⚠ Permanent change Cuts, drills or glues the device. You cannot undo it.
Add LEDs behind a Plexiglas diffuser (or an EL panel) and a microswitch. Delicate screen-plate work with solvent and cyanoacrylate.[17][18][19]
Good to know
- A TI-83 Plus build separates the screen plate with a blade and ether, then adds a Plexiglas diffuser and LEDs behind the screen with a momentary microswitch (case wall thinned for the switch).[17]
- The calculator is supplied with 6 V max from alkaline batteries; check LED diode specs before wiring.[17]
- On the Silver Edition, four to six bright LEDs were suggested as enough; EL panels behind the screen gave the best results in forum experience.[18][19]
⚠ Watch out
- Ether solvent is highly volatile; cyanoacrylate glue tubes are toxic — use only enough to hold the LEDs. Intended for experienced hardware builders.[17]
Guides:Backlighting the TI 83+
Sources (19)
- official TI-83 Plus Graphing Calculator | Texas Instruments · 2026-11-17
- official Guidelines and Precautions for Replacing Batteries in TI Graphing Calculators · 2026-11-17
- docs TI-83 Plus - ticalc.org · 2026-11-17
- docs TI-83 Plus Silver Edition - ticalc.org · 2026-11-17
- docs TI-83 Plus Backup Battery Replacement · 2026-11-17
- docs TI-83 Plus Back Case Replacement · 2026-11-17
- docs TI-83 Plus Motherboard & Screen Replacement · 2026-11-17
- docs How to Repair a Glitchy TI-83 Plus Screen · 2026-11-17
- docs TI-83 Plus IO Port Replacement · 2026-11-17
- docs TI-83 Plus Keyboard Mat Replacement · 2026-11-17
- docs TI-83 Plus Individual Keys Replacement · 2026-11-17
- official Download · KnightOS · 2026-11-17
- official KnightOS · 2026-11-15
- official GitHub - KnightOS/KnightOS · 2026-11-15
- docs Doors CS 7.4 - ticalc.org · 2026-11-15
- docs MirageOS v1.2 - ticalc.org · 2026-11-15
- blog Backlighting the TI 83+ · 2026-11-17
- forum Backlighting a TI-83 plus Silver Edition - Cemetech · 2026-11-17
- forum Drop-In PCB Hardware Mod for the TI-83+SE - Cemetech · 2026-11-17