★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 141 device pages approved★ 1634 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000147devices tracked

Home › Devices › Texas Instruments › TI-Nspire CX / CX CAS

[ device photo ]NEW!

TEXAS INSTRUMENTS · CALCULATOR

TI-Nspire CX / CX CAS

Also called: Nspire CX · Nspire CX CAS · TI-Nspire CX · TI-Nspire CX CAS

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 12 sources

Color TI-Nspire handhelds (CAS and non-CAS) with a rechargeable battery and 320×240 screen. Ndless unlocks native programs on supported OS versions; battery and sticky-key repair guides cover opening the case.[1][2][6][4]

3MODS
3WORK
0EXPERIMENTAL
12SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearHow to tell
TI-Nspire CXNon-CAS—Same hardware as the CX CAS, but without Computer Algebra System capabilities. Discontinued; the CX II series replaces it.[2][3]
TI-Nspire CX CASCAS—Has Computer Algebra System (CAS) capabilities. Discontinued; the CX II CAS line replaces it.[1][3]
Specs
ScreenColour backlit 320×240[1][2]
Memory100 MB storage memory / 64 MB operating memory[1]
BatteryTI rechargeable battery (included)[1][2]
PortsUSB for computer connectivity and unit-to-unit link with other TI-Nspire handhelds[1]

Mods (3)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Ndless (native programs)Works
SoftwareDifficulty: noneCase stays closedNo solderingReversible15-30 min
  • ⚠ Data loss Can erase what is on the device. Back up first.
  • ⚠ Can brick A mistake can leave the device unable to start.

Transfer an Ndless installer and resources into a top-level ndless folder, then open the installer. Match the build to your OS version.[4][5][6][7][8][3][9][10]

Good to know

  • Ndless lets the calculator run assembly and other native programs that the stock OS blocks.[5][4][10]
  • Release notes list CX and CX CAS support on OS versions including 4.5.5.79 (and earlier 4.5.x builds in the supported table). OS 4.5.1 and 4.5.2 must first be upgraded to 4.5.3.[6]
  • Typical install: put the installer and ndless_resources.tns in a top-level folder named ndless, open the installer, and wait.[7][5][6]
  • Official OS updates use TI-Nspire CX Student Software or Computer Link over USB. Unsaved data is lost during the update.[3]
  • TI-Planet indexes Ndless install tutorials by CX OS version (including 4.5.5).[8]

⚠ Watch out

  • After a normal install of OS 4.5.1, Ndless was unavailable and the OS could not be downgraded the normal way.[9]
  • For a persistent Ndless install, the Ndless team says it is not responsible for data loss or reboot-looped calculators.[5]

Guides:Legimet/Ndless README (quick install by OS)Ndless releasesNdless install tutorials

Rechargeable battery replacementWorks
BatteryDifficulty: easyOpens caseNo solderingReversible15-30 min
  • ⚠ Lithium battery Uses or touches a lithium cell. A damaged cell can catch fire.

Swap the internal TI rechargeable pack when it holds little or no charge. Use a Phillips #0 screwdriver.[11][1]

Special tools: Phillips #0 screwdriver

Parts

  • TI-Nspire rechargeable battery Fits — Guide recommends an official Texas Instruments battery.[11]

Good to know

  • A worn pack stores less energy or none.[11]
  • The guide covers the internal rechargeable battery of the TI-Nspire CX.[11]

⚠ Watch out

  • Inspect the old pack for leaks or swelling before removal. Damaged batteries are a fire hazard; do not use a punctured pack.[11]

Guides:TI-Nspire CX Battery Replacement

Sticky button cleaningWorks
RepairDifficulty: mediumOpens caseNo solderingReversible40 min

Open the case, clean corrosion under a sticking key, then reassemble and test before closing.[12]

Good to know

  • Corrosion can form inside the buttons and make a key stick or fail.[12]
  • Steps cover powering off, removing the feet, taking the case apart, cleaning the button, and testing before final close.[12]

⚠ Watch out

  • Many small spacers and screws can fall out while the case is open.[12]

Guides:TI-Nspire CX Defective Button Repair

Sources (12)

SOURCES.TXT