★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.★ 50 device pages approved★ 482 sources cited★ Every fact links to its source★ Send us your build log★ No ads. Some part links may earn us a commission.
mods for old iconic tech · est. 2026
0000054devices tracked

Home › Devices › Canon › Canon EOS 7D Mark II

Canon EOS 7D Mark IINEW!

Photo: A.Savin, CC BY-SA 3.0 · AI-edited (studio background)

CANON · CAMERA · 2014

Canon EOS 7D Mark II

Also called: EOS 7D Mark II · 7D Mark II · 7D2

✔ APPROVEDChecked fact by fact · last checked 2026-11-16 · 11 sources

Canon's dual-DIGIC 6 APS-C body from 2014. Magic Lantern has a DIGIC 6 port targeting firmware 1.1.2. Builds covered here are a utility set: intervalometer, cropmarks, RAW live view, and related overlays — not a full legacy feature pack.[10][2][3][7]

1MODS
0WORK
1EXPERIMENTAL
11SOURCES

Which one do I have?

MODELS.TXT
ModelVariantYearFirmwareHow to tell
EOS 7D Mark IIDual DIGIC 620141.1.22014. Dual DIGIC 6, Dual Pixel CMOS AF, dual CF/SD slots. Magic Lantern platform 7D2.112 needs Canon firmware 1.1.2.[10][2]
Specs
Sensor20.2 MP APS-C CMOS, Dual Pixel CMOS AF, dual DIGIC 6[9][10]
BurstUp to 10 fps, 65 cross-type AF points[9]
BatteryLP-E6N (LP-E6 also used)[9][11]
StorageCompactFlash and SD dual slots[10]

Mods (1)

⚠ Mod at your own risk. We collect what others have published; we have not tested these mods. Read the safety notes

Magic LanternExperimental
SoftwareDifficulty: mediumCase stays closedNo solderingReversible
  • ⚠ Can brick A mistake can leave the device unable to start.
  • ⚠ Data loss Can erase what is on the device. Back up first.

A card-boot DIGIC 6 add-on for firmware 1.1.2. It does not replace Canon's firmware. The 7D2.112 build enables RAW live view, global draw, cropmarks, powersave live view, an intervalometer, and crash logging.[1][2][3][7][8][5][6][4]

Parts

  • Bootable CF or SD card Fits — The camera takes CompactFlash (UDMA-7) and SD (UHS-I) cards.[10]

Good to know

  • Magic Lantern loads beside Canon's firmware from the memory card using a boot flag. Wikipedia lists the 7D Mark II among later ports maintained by a new core team.[1][6]
  • Platform 7D2.112 needs Canon firmware 1.1.2 (file 7D200112.FIR). It targets the two DIGIC 6 processors (ARM Cortex-R4).[2]
  • The 7D2.112 feature set enables RAW live view, memory crash logging, global draw, cropmarks, powersave live view, and an intervalometer.[3]
  • 2025 coverage of the project revival describes newly supported DIGIC 6/7 bodies, including the 7D Mark II, as receiving utility features such as an intervalometer, custom cropmarks, shutter-count check, and a 30-minute Live View powersave disable.[7][8]

⚠ Watch out

  • This build requires Canon firmware 1.1.2.[2]
  • Treat this port as experimental: public write-ups frame the 7D Mark II among utility builds, not as a full legacy Magic Lantern feature set.[7][8]
  • The project warns that this software can damage or destroy the camera.[5]

Guides:Magic Lantern INSTALL.txtMagic Lantern INSTALL.txt (master)

Sources (11)

SOURCES.TXT